GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1321-3R25-B |
Series: | 1321 |
Description:
1321-3R25-B belongs to the 1321 power component series by Allen-Bradley. It has a current rating of 25 amperes. This input output safety component has 3 to 5% impedance. It has a three-phase voltage rating of 600 to 690 volts alternating current (AC). It is a very reliable product and can be used in various industrial applications at the input and output side. The storage temperature of this device ranges should range from -40 to +70 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1321-3R25-B reactor by Allen-Bradley finds applications in different industrial settings. It has a 25-ampere current rating and a 600 to 690 volts AC voltage rating. Allen-Bradley products are very reliable and are widely used in different applications because of this. This device operates at a frequency of 50 to 60 hertz and has an impedance rating of 3% to 5%. Protection against various errors and harmonic distortion is also provided in this reactor. The switching frequency of this device is given as 20 kilohertz for the reactor. This three-phase reactor has a storage temperature of -40 to +70 degrees Celsius along with a humidity rating of 5% to 95% non-condensing. The ambient temperature of this device for open style should be 50 degrees Celsius, while for closed style, the ambient temperature should be 40 degrees Celsius. The overload rating is given as 200% of current for 30 minutes and 300% of current for 1 minute. This reactor is equipped with dv/dt protection. Three thousand (3000) volts rms is the rated dielectric strength of this Allen-Bradley product. The inductance curve is different for different values of current. For 100% current, the inductance curve is 100%. For 150% current, the inductance curve is 100%. Additionally, the inductance curve is 50% for 350% current. This device has an inductance tolerance of +/- 10%. It has a Class N insulation system with an altitude rating of 1000 meters. It is used in many types of applications and is internationally certified. It helps to protect systems against failure caused by different factors.
Question: Does Automation Stop offer repairs on the 1321-3R25-B?
Answer: Yes. We offer repairs for the 1321-3R25-B and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1321-3R25-B?
Answer: If you buy the 1321-3R25-B through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1321-3R25-B online?
Answer: Yes. Automation Stop sells the 1321-3R25-B online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1321-3R25-B?
Answer: The 1321-3R25-B is made by Allen Bradley - Drives.
For additional information about 1321-3R25-B check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1321-3R25-B.
Revision Part # | Also Known As | Availability |
---|---|---|
1321-3R25-B/A | 1321-3R25-B Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.