GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1321-3R45-B |
Series: | 1321 |
Description:
The 1321-3R45-B is a power conditioning product that was manufactured by Allen Bradley. These products are very commonly used because they increase the life of equipment and efficiently improve the overall results. The components are harmonic compensated. The 1321-3R45-B has a current rating of 45 amperes. This is a three-phase component and the voltage rating for it is 600 to 690 volts AC. It meets electrical safety standards given by different agencies.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1321-3R45-B is a power conditioning product by Allen Bradley. This reactor absorbs line disturbances of different types, which can be a reason for shutting down of the drive. This aids in helping the drive run longer, which is important in different applications. These are designed to specially cater harmonic compensations. The current rating is 45 amperes. At the input side, these reactors help to remove spurious tripping, improve power factor value, increase semiconductor overall life, lessen voltage notching, reduce harmonic distortion, and to meet IEEE-519 or EN-61800 standards. At the output side, the reactors protect motors from various long-time effects, lessen surge currents, lessen output voltage dv/dt, reduce motor temperature, increase semiconductor life, and reduce audible motor noise. These are widely used because they provide so many benefits to the system. The voltage rating for the 1321-3R45-B is 600 to 690 volts AC, three-phase. When multiple drives are connected, the reactors help to lessen cross talk. It has a 3% to 5% impedance. The reactor is internationally used and meets different internationally followed standards. The component has a Class N system for insulation along with an altitude rating given as 1000 meters. This reactor can be stored at a temperature of -40 to +70 degrees Celsius. This is an open style reactor. For IGBT applications that have long drive-to-motor lengths, these reactors can greatly protect against rapid dv/dt rise times. The frequency at which it operates is 50 to 60 hertz (Hz) with a switching frequency equal to 20 kilohertz (kHz).
Question: Does Automation Stop offer repairs on the 1321-3R45-B?
Answer: Yes. We offer repairs for the 1321-3R45-B and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1321-3R45-B?
Answer: If you buy the 1321-3R45-B through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1321-3R45-B online?
Answer: Yes. Automation Stop sells the 1321-3R45-B online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1321-3R45-B?
Answer: The 1321-3R45-B is made by Allen Bradley - Drives.
For additional information about 1321-3R45-B check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1321-3R45-B.
Revision Part # | Also Known As | Availability |
---|---|---|
1321-3R45-B/A | 1321-3R45-B Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.