GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1336-FAN-SP3A |
Series: | 1336 Adjustable |
Description:
The 1336-FAN-SP3A module from Allen-Bradley is a fan that works with drives from Allen-Bradley / Rockwell Automation. The fan unit is essential for keeping the drive within its operating temperature range. The adjustable frequency drives of the 1336 series function at a temperature of 0 to 60 degrees Celsius. The 1336-FAN-SP3A is KC certified and was developed and manufactured to a high safety level. Allen-Bradley recommends putting drive units in non-condensing relative humidity ranges of 0 to 95 percent with proper ventilation.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1336-FAN-SP3A module is a fan that is compatible with Allen-Bradley / Rockwell Automation drives. The fan unit is critical for maintaining the drive's operational temperature range. The working temperature of the adjustable frequency drives in the 1336 series is between 0 and 60 degrees Celsius. The 1336-FAN-SP3A keeps the drives cool by allowing air to circulate around them. Only a single fan unit is required to adequately cool drives with horsepower ratings of up to 125 horsepower. It can also be utilized with drives from the 1336 series that have a horsepower rating of 100 or 75. The type E frame is used in this fan model. A CHB1 fan capacitor is included. The capacitor relieves the supply line of reactive power, allowing the power factor to improve. Because the capacitor is a high-capacity device, caution should be exercised throughout the operation, as well as during installation and removal. Before performing fan or drive maintenance, the capacitor must be totally depleted. The 1336-FAN-SP3A is KC certified and has been designed and produced to a high standard of safety. Allen-Bradley advises installing drive units in situations with a non-condensing relative humidity of 0 to 95 percent and adequate ventilation. The 1336-FAN-SP3A's effectiveness will be limited if the drives are placed in a degraded environment. Furthermore, the drive power supply can be operated from an external voltage source via terminal blocks TB-4 and TB-6 (B-Frame drives and above). Both terminal blocks are accessible from the front of the drive and are positioned on the base driver board. In the lack of bus voltage for the 1336-FAN-SP3A fan, TB4 can be used to externally power the low voltage power supply, allowing drive control functions to operate.
Question: Does Automation Stop offer repairs on the 1336-FAN-SP3A?
Answer: Yes. We offer repairs for the 1336-FAN-SP3A and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1336-FAN-SP3A?
Answer: If you buy the 1336-FAN-SP3A through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1336-FAN-SP3A online?
Answer: Yes. Automation Stop sells the 1336-FAN-SP3A online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1336-FAN-SP3A?
Answer: The 1336-FAN-SP3A is made by Allen Bradley - Drives.
Question: What type of product is the 1336-FAN-SP3A?
Answer: The 1336-FAN-SP3A is part of the 1336 Adjustable series.
For additional information about 1336-FAN-SP3A check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1336-FAN-SP3A.
Revision Part # | Also Known As | Availability |
---|---|---|
1336-FAN-SP3A/A | 1336-FAN-SP3A Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.