GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1336-SN-SP10A |
Series: | 1336 |
Description:
The Rockwell Automation 1336-SN-SP10A is a component of the Bulletin 1336 drives. This unit is an Inverter Snubber used for 1336 Plus, Plus II, Impact and Force drives. This is used for Frame E drives.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1336-SN-SP10A is used for the 1336 Adjustable Frequency AC drive by Allen-Bradley and Rockwell Automation. It is particularly compatible for the 1336 Plus, Plus II, Impact and Force drives. This product is a spare part item that is a Level two (2) Assembly component. Three (3) Snubber kits are used for each drive. This Snubber Printed Circuit Board (PCB) is used for drives with Frame E or those with output power of 150, 200, 250 and X300HP. The snubber board is installed inside within the drive’s main chassis, located on the side of the bridge heatsink in the converter bay. When replacing this board, power must be removed from the drive and ideally locked out from access.
Do not immediately touch the components even if the drive’s power is removed as it has capacitor that store voltage for a short period. Before proceeding, measure the +DC and -DC on the TB1 Terminal Block which may be found in the inverter bay of the drive. Additionally, observe electrostatic discharge preventive measures to prevent damage to other solid-state devices. To uninstall the snubber board, remove the leads terminated at +06 and -16 stab-on connections. Tag these wires properly according to the terminal where it came from. Uninstall also the leads located at 81, 82 and 83 terminals. Tag the wires accordingly. Remove the drive from the Four (4) plastic stand-offs. Install the new board by aligning the board according to the Four (4) standoff holes and terminating the tagged leads to the appropriate stab-on connections.
Brand | Allen-Bradley |
PCB Series | 1336 |
Type | Spare part for VFD |
Product Lifecycle status | Discontinued |
Compatibility | 1336 PLUS, PLUS II, FORCE and IMPACT |
Storage Temperature | -40° C to 85°C |
Operating Temperature | 0 to 60 degrees Celsius |
Supported Frame | E |
Rated Frequency | 50-60 Hertz |
Weight | 400 grams |
Question: Does Automation Stop offer repairs on the 1336-SN-SP10A?
Answer: Yes. We offer repairs for the 1336-SN-SP10A and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1336-SN-SP10A?
Answer: If you buy the 1336-SN-SP10A through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1336-SN-SP10A online?
Answer: Yes. Automation Stop sells the 1336-SN-SP10A online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1336-SN-SP10A?
Answer: The 1336-SN-SP10A is made by Allen Bradley - Drives.
Question: What Brand is included with the 1336-SN-SP10A?
Answer: The Allen Bradley/Rockwell Automation 1336-SN-SP10A has a Allen Bradley (AB) Brand.
Question: What is the Compatibility of the 1336-SN-SP10A?
Answer: The Compatibility of the Allen-Bradley 1336-SN-SP10A is 1336 PLUS, PLUS II, FORCE and IMPACT.
Question: What Operating Temperature does the Allen-Bradley 1336-SN-SP10A have?
Answer: The Operating Temperature of the Allen-Bradley 1336-SN-SP10A is 0 to 60 degrees Celsius.
Question: What is the PCB Series of the Allen Bradley/Rockwell Automation 1336-SN-SP10A?
Answer: The Allen Bradley/Rockwell Automation 1336-SN-SP10A has a PCB Series of 1336.
Question: What Product Lifecycle status are included with the 1336-SN-SP10A?
Answer: The 1336-SN-SP10A includes Discontinued for its Product Lifecycle status.
Question: What Rated Frequency does the Allen-Bradley 1336-SN-SP10A have?
Answer: The Rated Frequency of the 1336-SN-SP10A is 50-60 Hertz.
Question: What Storage Temperature does the Allen Bradley/Rockwell Automation 1336-SN-SP10A have?
Answer: The Allen Bradley/Rockwell Automation 1336-SN-SP10A has a Storage Temperature of -40° C to 85°C.
Question: What Supported Frame does the 1336-SN-SP10A have?
Answer: The 1336-SN-SP10A has a E Supported Frame.
Question: What is the Weight of the 1336-SN-SP10A?
Answer: The Weight of the Rockwell Automation 1336-SN-SP10A is 400 grams.
For additional information about 1336-SN-SP10A check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1336-SN-SP10A.
Revision Part # | Also Known As | Availability |
---|---|---|
1336-SN-SP10A/A | 1336-SN-SP10A Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.