The Allen-Bradley 1394-SJT10-T-RL system module can be employed as a drive system and an embedded motion controller (GMC) with turbo integrated motion controller IMC S Class, an analog servo, CNC digital interface, an integrated 9/440 CN or a SERCOS servo drive system. The Allen-Bradley 1394-SJT10-T-RL system module supports direct line connection (transformerless) for both 360 volts AC and 480 volts AC three-phase input power. The Allen-Bradley 1394-SJT10-T-RL system module includes efficient IGBT power conversion and module-to-module connection systems. The Allen-Bradley 1394-SJT10-T-RL system module can be linked with up to four-axis modules and each axis module can be interfaced with a motor. The Allen-Bradley 1394-SJT10-T-RL system module draws a current consumption of 13 amperes. The Allen-Bradley 1394-SJT10-T-RL system module delivers a continuous power output of 10 kilowatts. The Allen-Bradley 1394-SJT10-T-RL system module provides a capacitance of 330 microfarads and an inductance of 750 microhenries.

The Allen-Bradley 1394-SJT10-T-RL system module is programmed using graphical motion control language (GML). The Allen-Bradley 1394-SJT10-T-RL system module includes RS-232, DH485 and RS-422 communication protocols. This Allen-Bradley 1394-SJT10-T-RL system module has remote I/O and AxisLink communication protocol options. The Allen-Bradley 1394-SJT10-T-RL system module includes 64 kilos of memory and a 32-bit processor. This Allen-Bradley module offers more application program memory and runs the programs faster. The 1394-SJT10-T-RL system module provides a high speed and direct connection to the SLC 5/03, 5/04 or 5/05. The Allen-Bradley 1394-SJT10-T-RL system module can operate at a temperature range of 0 degrees to 50 degrees Celsius (32 degrees to 122 degrees Fahrenheit) for industrial applications and weighs approximately 11 kilograms (24.25 pounds) while shipping.

Allen-Bradley 1394-SJT10-T-RL is a digital servo controller that can function as a drive system as well as a microprocessor-based computer hardware for motion control with an analog servo, turbo integrated motion controller IMC S Class, integrated 9/440 CN, CNC digital interface, or SERCOS servo drive system. The graphical programming language used that controls the motor is graphical motion control (GMC). The system has up to four axis links modules that are connected to the motor, as well as a remote I/O interface. The communication interface of the system constitutes the RS-232 port, DH485, and RS-422 ports. The alternating current input supply is 380/480 Volts, 3 phase power with a frequency of 50/60 Hertz at 13.0 Amperes. Continuous power output supply is rated at 8/10 Kilowatts with the peak current output being 29.46 amperes. The system has a total memory of 64 Kilos and a 32 Bit CPU. The system’s efficiency is rated at 99 percent and the maximum power dissipated at the full percentage of the power output is 98 Watts. At 20 percent of the total output power is 70 Watts, at 40 percent it is 77 Watts, at 60 percent it is 81 Watts and at 80 percent it’s 84 Watts. The maximum temperature range for optimal operation of the system is 0 – 50 degrees Celsius, the rate of the operating shock is 15 G and that of vibration is 1 G. on standby, the ratings of the operating shock and that of the vibration varies to a maximum of 30 G and 2.5 G respectively. The system acts as a connection to SLC 5/03, 5/04, or 5/05 as well as provides high speed during operations.