The Servo controller and amplifier 1394C-AM50-IH from Allen-Bradley has a 15.6 kW power rating as well as a 33.2 amps amperage rating and an inside cabinet heatsink, the servo controller and amplifier is also a part of the advanced filtering and termination set of upgrades, The 1394C-AM50-IH also has a DC input voltage ranging from 530 to 680 volts. The efficiency of the module rates up to ninety-eight percent. Furthermore, This servo controller has a static gain of 22.8 RMS Amps/mV and also includes a continuous current of 23.3 amps. The maximum current of this module ranges up to 33.2 Amps and it gets a constant voltage level that ranges from 380 to 460 Volts Alternating Current. It also holds a capacitance of 465 microfarads. Anyone who plans to install this servo controller weighing 14.8 pounds, must ensure that the surrounding environment is suitable and that the temperature of the location where this gadget will be installed must not exceed fifty degrees Celsius. The module holds a 100 percent torque disturbance speed regulation. And the peak power of the Servo controller rates up to 380 to 460 volts alternating current and a base speed of 0 to 0.05 percent. The 1394C-AM50-IH needs to be mounted vertically and for discrete input connections, there are eight utilized pins on this device. To help you avoid problems such as shocks, vibrations, grease, dust, mist, and vapors from corroding the controller, it should be positioned on a firm and flat surface. Operators must make sure that everything is maintained, such as correct airflow, module access ane bend radius. while installing the controller and during the installation process, all the steps must be carried out in a manner that makes it possible for the person installing to do things such as tapping, cutting, welding, and other processes that are needed to be carried out when the machine is withdrawn from its housing. The dimensions for the 1394C-AM50-IH are 13.8 × 11.0 × 2.95, the 1394C-AM50-IH needs to be installed at an altitude of 1000 meters max. There are LEDs mounted on this machine that assist the operators by indicating what type of operation is running on the module. Avoid having any kind of metal debris falling into the running machine as it may possibly harm the circuitry and machine.