GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1398-DDM-019X |
Series: | Servo Drive 1398 |
Description:
The Allen-Bradley 1398-DDM-019X servo motor drive provides high performance in a very reduced size to control sinusoidal AC brushless motors and for a wide range of applications. The Allen-Bradley 1398-DDM-019X servo motor drive can be used as indexing, velocity servo, stepper drivers or master encoder followers. The Allen-Bradley 1398-DDM-019X servo motor drive supports a single phase input voltage of 115/230 volts AC and a continuous input current of 18 amperes. This Allen-Bradley 1398-DDM-019X servo motor drive delivers a continuous output current of 10 amperes and a continuous output power of 2 kilowatts. The Allen-Bradley 1398-DDM-019X servo motor drive includes an RS-232 serial port, four-wire RS-485 and a Devicenet communication port with a maximum baudrate of 500 kilobits per second. The Allen-Bradley 1398-DDM-019X includes digital control loops which can be used for velocity, torque or position control. This Allen-Bradley 1398-DDM-019X servo motor drive can operate at a temperature range of -5 degrees to 55 degrees Celsius (23 degrees to 131 degrees Fahrenheit) for industrial applications and weighs approximately 2 kilograms (4.4 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1398-DDM-019X servo motor drive provides high performance in a very reduced size to control sinusoidal AC brushless motors and is used for a wide range of applications. The Allen-Bradley 1398-DDM-019X servo motor drive can be used as indexing, velocity servo, stepper drivers or master encoder followers. The Allen-Bradley 1398-DDM-019X servo motor drive supports a single phase input voltage of 115/230 volts AC and a continuous input current of 18 amperes. This Allen-Bradley 1398-DDM-019X servo motor drive delivers a continuous output current of 10 amperes and a continuous output power of 2 kilowatts. The Allen-Bradley 1398-DDM-019X servo motor drive includes an RS-232 serial port, four-wire RS-485 and a Devicenet communication port with a maximum baud rate of 500 kilobits per second. The Allen-Bradley 1398-DDM-019X includes digital control loops which can be used for velocity, torque or position control.
The Allen-Bradley 1398-DDM-019X servo motor drive includes four optically isolated selectable digital inputs and two optically-isolated selectable digital outputs. This Allen-Bradley 1398-DDM-019X servo motor drive contains one analog current limit input and one user-programmable analog output for variable controlling or torque sharing. The Allen-Bradley 1398-DDM-019X servo motor drive has an analog to digital (A/D) converter with a resolution of 14-bit to command the input velocity. The Allen-Bradley 1398-DDM-019X servo motor drive includes an internally-shielded filter for electromagnetic compatibility (EMC). This Allen-Bradley 1398-DDM-019X servo motor drive can operate at a temperature range of -5 degrees to 55 degrees Celsius (23 degrees to 131 degrees Fahrenheit) for industrial applications and weighs approximately 2 kilograms (4.4 pounds) while shipping.
Brand | Allen-Bradley / Rockwell Automation |
Series | ULTRA 100 series servo motor drive |
Part Number | 1398-DDM-019X |
Input voltage | 100 to 240V AC RMS nominal (88 to 265 Volts), single phase |
Input frequency | 47-63 Hz |
Peak output current | 30A |
Continuous output current | 10A |
Continuous output power | 2.0 kW |
Continuous input current | 18 A |
Analog velocity/torque input | ±10 Volts |
Serial Communication Port | RS-232, four-wire RS-485 |
Baud rate | 1,200 to 19,200 baud |
DeviceNet | 125 kps (default), 250 kps, or 500 kps |
Control Loops | Torque, velocity, and position control |
Operating temperature | -5ºC to 55ºC (23ºF to 131ºF) |
Humidity | 5% to 90%, non-condensing |
Weight | 2.0 kg (4.4 lb) |
Question: Does Automation Stop offer repairs on the 1398-DDM-019X?
Answer: Yes. We offer repairs for the 1398-DDM-019X and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1398-DDM-019X?
Answer: If you buy the 1398-DDM-019X through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1398-DDM-019X online?
Answer: Yes. Automation Stop sells the 1398-DDM-019X online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1398-DDM-019X?
Answer: The 1398-DDM-019X is made by Allen Bradley - Drives.
Question: What type of product is the 1398-DDM-019X?
Answer: The 1398-DDM-019X is part of the Servo Drive 1398 series.
Question: What is the Analog velocity/torque input of the Rockwell Automation 1398-DDM-019X?
Answer: The 1398-DDM-019X has a Analog velocity/torque input of ±10 Volts.
Question: What Baud rate does the Allen-Bradley 1398-DDM-019X have?
Answer: The Baud rate of the Allen-Bradley 1398-DDM-019X is 1,200 to 19,200 baud.
Question: What Brand is included with the 1398-DDM-019X?
Answer: The Rockwell Automation 1398-DDM-019X has a Allen Bradley / Rockwell Automation Brand.
Question: What is the Continuous input current of the 1398-DDM-019X?
Answer: The Rockwell Automation 1398-DDM-019X has a Continuous input current of 18 A.
Question: What is the Continuous output current of the 1398-DDM-019X?
Answer: The 1398-DDM-019X has a Continuous output current of 10A.
Question: What is the Continuous output power of the 1398-DDM-019X?
Answer: The 1398-DDM-019X has a Continuous output power of 2.0 kW.
Question: What kind of Control Loops does the 1398-DDM-019X have?
Answer: The Allen-Bradley 1398-DDM-019X has Control Loops Torque, velocity, and position control.
Question: What DN does the 1398-DDM-019X have?
Answer: The Rockwell-Automation 1398-DDM-019X has a DN of 125 kps (default), 250 kps, or 500 kps.
Question: What Humidity does the 1398-DDM-019X have?
Answer: The Humidity of the 1398-DDM-019X is 5% to 90%, non-condensing.
Question: What Input frequency does the 1398-DDM-019X have?
Answer: The Allen Bradley/Rockwell Automation 1398-DDM-019X has a Input frequency of 47-63 Hz.
Question: What is the Input voltage of the Allen Bradley Automation 1398-DDM-019X?
Answer: The Input voltage of the 1398-DDM-019X is 100 to 240 volts alternating current (AC) RMS nominal (88 to 265 Volts), single phase.
Question: What Operating temperature does the Allen Bradley-Rockwell Automation 1398-DDM-019X have?
Answer: The Operating temperature of the 1398-DDM-019X is -5ºC to 55ºC (23ºF to 131ºF).
Question: What is the part Number of the 1398-DDM-019X?
Answer: The component Number of the 1398-DDM-019X is 1398-DDM-019X.
Question: What is the Peak output current of the 1398-DDM-019X?
Answer: The 1398-DDM-019X has a Peak output current of 30A.
Question: What is the Serial Communication Port of the Rockwell Automation 1398-DDM-019X?
Answer: The Serial Communication Port of the Rockwell Automation 1398-DDM-019X is RS-232, four-wire RS-485.
Question: What is the Weight of the 1398-DDM-019X?
Answer: The Allen Bradley-Rockwell Automation 1398-DDM-019X has a Weight of 2.0 kg (4.4 lb).
For additional information about 1398-DDM-019X check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1398-DDM-019X.
Revision Part # | Also Known As | Availability |
---|---|---|
1398-DDM-019X/A | 1398-DDM-019X Ser A, Series A, Rev A | Request a Quote |
1398-DDM-019X/B | 1398-DDM-019X Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.