GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1398-DDM-030X |
Series: | Servo Drive 1398 |
Description:
Manufactured by Allen-Bradley, the 1398-DDM-030X is a drive with a phase system that is singular with a continual maximum wattage of 3000 watts. The 1398-DDM-030X drive may be used with an Allen-Bradley electronically commutated motor to provide a constant torque rating of 3 to 450 lbs an inch, as well as a maximum torque rating of 9 to 1100 lbs an inch. It employs a singular-phase power supply with a voltage level of 100 to 240 volts alternating current and a frequency of 50 to 60 hertz.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
As part of the Ultra 200 product family from Allen-Bradley, the 1398-DDM-030X is a digital servo-system drive. The Bulletin 1398 DDM-030X by Allen-Bradley has a user memory of five hundred and twelve (512) kilobytes and an operational random access memory (RAM) of twenty-four (24) kilobytes, as well as a one hundred and twenty-eight (128) kilobyte flash drive. A continuous output of power of 1.8 kilowatts at 100 volts and 3 Kilowatts at 240 volts is provided by this drive. Serial host commands are used to configure this Allen-Bradley ULTRA 200 drive. This Allen-Bradley ULTRA 200 series drive is part of a series of digital drives that handle current, velocity, and position using microcontrollers. The 1398-DDM-030X ULTRA is certified by Conformité Européenne, along with being certified for safety and sustainability by Underwriter Laboratories. This device is also approved and listed by the Canada-based Underwater laboratories. In addition to that, this Allen-Bradley module is made accessible in a certified NEMA 12 housing. The device includes a five (5) to seven (7) volt fuse output power encoding interface along with configurable automated detection. Furthermore, it includes a five (5) volt encoder motor output with a two hundred percent (200%) voltage regulation for eight (8) minutes and a six hundred percent (600%) motor voltage regulation for twenty (20) seconds. This Allen-Bradley servo device has a maximum dissipated power wattage of 150 watts at an ambient temperature of no more than 50 degrees Celsius. In terms of design and build, it has a weight of 6.48 kilograms and physical dimensions that measure 14.2 x 4.10 x 8.93 inches.
Region of Manufacture* | United States |
Type | Servo Drive |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 1398-DDM-030X?
Answer: Yes. We offer repairs for the 1398-DDM-030X and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1398-DDM-030X?
Answer: If you buy the 1398-DDM-030X through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1398-DDM-030X online?
Answer: Yes. Automation Stop sells the 1398-DDM-030X online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1398-DDM-030X?
Answer: The 1398-DDM-030X is made by Allen Bradley - Drives.
Question: What type of product is the 1398-DDM-030X?
Answer: The 1398-DDM-030X is part of the Servo Drive 1398 series.
Question: What Region of Manufacture* does the Rockwell Automation 1398-DDM-030X have?
Answer: The Rockwell Automation 1398-DDM-030X has a United States Region of Manufacture*.
For additional information about 1398-DDM-030X check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1398-DDM-030X.
Revision Part # | Also Known As | Availability |
---|---|---|
1398-DDM-030X/A | 1398-DDM-030X Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.