GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1398-SR3AF |
Series: | Servo Drive 1398 |
Description:
This 1398-SR3AF shunt module is designed and manufactured by Allen Bradley. Without derating, durable device is able to function and withstand an altitude of up to five thousand (5000) feet. In addition to that, the Allen Bradley 1398-SR3AF device is able to withstand up to 15 g of shocks. Moreover, the optimal temperature of function for this module ranges from thirty-two (32) to one hundred and four (104) degrees Fahrenheit while the vibration of this shunt device is two thousand (2000) hertz.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1398-SR3AF shunt module is manufactured and designed by Allen Bradley. This device has a weight of around 1.5 kilograms and an ability to withstand shocks of up to 15 g. In addition to that, this active shunt device's humidity spans between the range of 5 percent to 90 percent of humidity. The function and operation of this module by Allen-Bradley vary depending on the degree of temperature. The higher the temperature that this module functions in, the less power performance it has. The change in performance is 5.5 watts for every 1 degree Celsius. The optimal range of temperature that this device should function in is 0 to 40 degrees Celsius. Moreover, this external shunt unit is able to properly function without derating or facing such issues, even at a height of up to 5000 feet. This shunt module is an auxiliary component that may be inserted in any ULTRA 100 series device from Allen-Bradley. In order to be set up, this module requires a copper cable that contains a temperature rating of 75 degrees Celsius, 4-2.5 mm2, and the cable should be shielded. Furthermore, to increase safety while using this device, several precautions must be exercised. The user should make sure to have space for ventilation in an area of 5 centimeters, either above or underneath the 1398-SR3AF shunt module. This aids in securing the device from overheating and in that case, an eventual eruption of fire. Any materials near this device should be protected by metal covering due to this devices tendency to emit heat while functioning.
Question: Does Automation Stop offer repairs on the 1398-SR3AF?
Answer: Yes. We offer repairs for the 1398-SR3AF and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1398-SR3AF?
Answer: If you buy the 1398-SR3AF through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1398-SR3AF online?
Answer: Yes. Automation Stop sells the 1398-SR3AF online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1398-SR3AF?
Answer: The 1398-SR3AF is made by Allen Bradley - Drives.
Question: What type of product is the 1398-SR3AF?
Answer: The 1398-SR3AF is part of the Servo Drive 1398 series.
For additional information about 1398-SR3AF check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1398-SR3AF.
Revision Part # | Also Known As | Availability |
---|---|---|
1398-SR3AF/A | 1398-SR3AF Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.