GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

2063PCDMF

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 2063PCDMF
Series: 2063

Description:

The 2063PCDMF is a harmonic filter and correction capacitor for power system applications. The 2063PCDMF is the cheapest and easiest solution that can enhance the power system transmission capacity, reduce energy losses, and rectify the load power factor. The 2063PCDMF has a power factor correction of 20 kVAr and can operate at a voltage rating of 600 Volts AC. The 2063PCDMF has a height of 222.3 millimeters (8.75 inches). The 2063PCDMF has a compact design with quiet operation. This correction capacitor product can operate at a temperature range of -40 degrees to 46 degrees Celsius (-40 degrees to 115 degrees Fahrenheit) for industrial applications and weighs approximately 2 kilograms (5 pounds) while shipping.


Key Features:

  • operates at voltage rating of 600 volts

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 2063PCDMF is a harmonic filter and correction capacitor for power system applications. It is the cheapest and the easiest solution that can enhance the power system transmission capacity, reduce energy losses, and rectify the load power factor. The 2063PCDMF has a power factor correction of 20 kVAr and can operate at a voltage rating of 600 Volts AC. The 2063PCDMF has a height of 222.3 millimeters (8.75 inches) and has a compact design with quiet operation. The 2063PCDMF correction capacitor is constructed to meet its NEMA 4X enclosure ratings. The 2063PCDMF can be connected through its secure threaded terminals. The 2063PCDMF contains a thermosetting polymer resin dielectric that has a flashpoint at a temperature of 212 degrees Celsius (+415 degrees Fahrenheit) and a fire point at a temperature of 260 degrees Celsius (500 degrees Fahrenheit).

The 2063PCDMF has a pressure-sensitive three-phase interrupter that disconnects the capacitor from the line before internal pressures damage and result case rupture. The 2063PCDMF includes discharge resistors in its design which permit to minimize 50 Volts of residual voltage within only one minute of de-energization. The 2063PCDMF has a long lifetime that can exceed twenty years. This correction capacitor offers five years of warranty and can be employed with fuses to increase the protection against overcurrent. This 2063PCDMF correction capacitor product can operate at a temperature range of -40 degrees to 46 degrees Celsius (-40 degrees to 115 degrees Fahrenheit) for industrial applications and weighs approximately 2 kilograms (5 pounds) while shipping.

Technical Specifications

Brand Eaton
Series Low voltage and power factor correction capacitor
Part Number 2063PCDMF
Voltage rating 600 volts
kvar rating 20.00 kVAR
Height 222.3 mm (8.75 inches)
Weight 2.0 Kg (5 lb)
Capacitor operating temperature –40°F (–40°C) to +115°F (+46°C)
Enclosure NEMA 4X enclosure
Protection Fused protection standard
Lifetime Twenty-year life
Warranty Five-year on capacitor cells
Flash point +212°C (+415°F)
Fire point +260°C (+500°F)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2063PCDMF?

Answer: Yes. We offer repairs for the 2063PCDMF and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 2063PCDMF?

Answer: If you buy the 2063PCDMF through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2063PCDMF online?

Answer: Yes. Automation Stop sells the 2063PCDMF online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2063PCDMF?

Answer: The 2063PCDMF is made by Allen Bradley - Drives.


Question: What Brand does the Allen Bradley Automation 2063PCDMF have?

Answer: The 2063PCDMF has a Eaton Brand.


Question: What Capacitor operating temperature does the 2063PCDMF have?

Answer: The 2063PCDMF has a Capacitor operating temperature of –40°F (–40°C) to +115°F (+46°C).


Question: What Enclosure does the 2063PCDMF have?

Answer: The Rockwell-Automation 2063PCDMF has a Enclosure of NEMA 4X enclosure.


Question: What Fire point does the 2063PCDMF have?

Answer: The Fire point of the Allen Bradley Automation 2063PCDMF is +260°C (+500°F) .


Question: What Flash point does the Allen Bradley Automation 2063PCDMF have?

Answer: The Allen Bradley Automation 2063PCDMF has a Flash point of +212°C (+415°F).


Question: What is the Height of the Allen Bradley-Rockwell Automation 2063PCDMF?

Answer: The Height of the 2063PCDMF is 222.3 mm (8.75 inch).


Question: What kvar rating does the Allen Bradley Automation 2063PCDMF have?

Answer: The Allen Bradley Automation 2063PCDMF has a kvar rating of 20.00 kVAR.


Question: What Lifetime is included with the Allen-Bradley 2063PCDMF?

Answer: The 2063PCDMF has a Twenty-year life Lifetime.


Question: What unit Number does the 2063PCDMF have?

Answer: The 2063PCDMF has a component Number of 2063PCDMF.


Question: What Protection is included with the 2063PCDMF?

Answer: The Rockwell-Automation 2063PCDMF has a Fused protection standard Protection.


Question: What Voltage rating does the Allen Bradley/Rockwell Automation 2063PCDMF have?

Answer: The Voltage rating of the 2063PCDMF is 600 volts.


Question: What Warranty is included with the 2063PCDMF?

Answer: The 2063PCDMF has a Five-year on capacitor cells Warranty.


Question: What is the Weight of the 2063PCDMF?

Answer: The 2063PCDMF has a Weight of 2.0 Kg (5 lb).


Series information for 2063PCDMF

For additional information about 2063PCDMF check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2063PCDMF.

Revision Part # Also Known As Availability
2063PCDMF/A 2063PCDMF Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 20G3PCDMF
  • 2O63PCDMF
  • 2OG3PCDMF

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP