GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2090-CPWM7DF-16AA15 |
Series: | 2090 |
UPC: | 884951211520 |
Description:
Item number 2090-CPWM7DF-16AA15 is an Allen Bradley cable from the Kinetix 2090 product series. It is standard, non-flex cable with four conductors. This cable can be used with a three-phase, 600-volt device. It features SpeedTec connection. The cable is produced from industrial TPE material and has an orange-colored jacket for easy identification. It is 15 meters (49.2 feet) long, with a 16 AWG wire size and an external diameter of 9.2 millimeters (0.36 inches).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 2090-CPWM7DF-16AA15 is a cable, manufactured by Allen Bradley. This cable is part of the Kinetix 2090 family of power and feedback cables. The 2090-CPWM7DF-16AA15 configuration is a standard, non-flex power only cable and its main function is for use with Kinetix 5500 and 5700 drive systems for static applications. It is a four-conductor, three-phase power cable for a maximum 600-volt power supply. The device uses SpeedTec DIN connection system that provides standardized connection with Allen Bradley servo drives, servo motors, and linear actuators. The connection SpeedTec itself features quick connection with positive metallic keying. The cable has two (2) different connection types on its two opposite ends; On the motor end, the connection type is type DF (drive-end flying-leads), while on the drive end, the connection type is PW (power wires only).
The cable construction is composed from three (3) layers. The first layer is the cable wire over which there is the second layer which consists of the cable shield. The third and final layer consists of the cable jacket. The cable is manufactured from industrial TPE material and has a DESINA orange colored jacket, which is easy to identify in a machine, when separating cables. Its wire size is 16 American wire gauge (AWG) and the total external diameter, including the shield and jacket, is 9.2 millimeters, or the equivalent of 0.36 inches. Its static installation bend radius is 7 times the cable diameter, or 64.4 millimeters (2.5 inches). The cable length is 15 meters (49.2 feet). This cable is NFPA-79 certified.
MPN | 2090-CPWM7DF-16AA15 |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | Kinetix Motion Accessory |
Product Type | Cable |
Cable Type | Motor power only |
Motor-end Connector Type | SpeedTec DIN connector |
Drive-end Connector Type | Drive-end, flying-leads |
Wire Gauge Size | 16 AWG |
Encoder Type | BLANK |
Cable Material Type | Standard, non-flex |
Cable Length | 15...90 m 49.5...295 ft |
Question: Does Automation Stop offer repairs on the 2090-CPWM7DF-16AA15?
Answer: Yes. We offer repairs for the 2090-CPWM7DF-16AA15 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-CPWM7DF-16AA15?
Answer: If you buy the 2090-CPWM7DF-16AA15 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-CPWM7DF-16AA15 online?
Answer: Yes. Automation Stop sells the 2090-CPWM7DF-16AA15 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-CPWM7DF-16AA15?
Answer: The 2090-CPWM7DF-16AA15 is made by Allen Bradley - Drives.
Question: What is the Cable Length of the 2090-CPWM7DF-16AA15?
Answer: The 2090-CPWM7DF-16AA15 has a Cable Length of 15...90 m 49.5...295 ft.
Question: What Cable Material Type does the 2090-CPWM7DF-16AA15 have?
Answer: The 2090-CPWM7DF-16AA15 has a Standard, non-flex Cable Material Type.
Question: What Cable Type does the 2090-CPWM7DF-16AA15 have?
Answer: The Allen-Bradley 2090-CPWM7DF-16AA15 has a Motor power only Cable Type.
Question: What Drive-end Connector Type does the 2090-CPWM7DF-16AA15 have?
Answer: The Allen Bradley-Rockwell Automation 2090-CPWM7DF-16AA15 has a Drive-end, flying-leads Drive-end Connector Type.
Question: What Encoder Type is included with the 2090-CPWM7DF-16AA15?
Answer: The Allen-Bradley 2090-CPWM7DF-16AA15 has a BLANK Encoder Type.
Question: What Motor-end Connector Type is included with the Allen-Bradley 2090-CPWM7DF-16AA15?
Answer: The Allen-Bradley 2090-CPWM7DF-16AA15 has a SpeedTec DIN connector Motor-end Connector Type.
Question: What Product Type does the Allen Bradley-Rockwell Automation 2090-CPWM7DF-16AA15 have?
Answer: The Allen Bradley-Rockwell Automation 2090-CPWM7DF-16AA15 has a Cable Product Type.
Question: What is the Wire Gauge Size of the 2090-CPWM7DF-16AA15?
Answer: The Wire Gauge Size of the Allen Bradley Automation 2090-CPWM7DF-16AA15 is 16 AWG.
For additional information about 2090-CPWM7DF-16AA15 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-CPWM7DF-16AA15.
Revision Part # | Also Known As | Availability |
---|---|---|
2090-CPWM7DF-16AA15/A | 2090-CPWM7DF-16AA15 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.