The integrated axis module (IAM) 460V converter power specifications are discussed as follows. This module category operated at an AC input voltage of 324-528V rms three-phase which is equivalent to the 360-480V nominal value and an AC input frequency of 47-63 Hz. Main Ac input current Nominal 24.0 A (rms) and maximum inrush (0-pk) 22.0 A. All IAM power modules are limited to 2 contactor cycles per minute (with up to 4 axes), or 1 contactor cycle per minute (with 5-8 axes). The cycle capability also depends on the converter power rating and the total system capacitance. DC input voltage and current for common-bus followers are 458-747V DC and 22.6 A, respectively. Control power AC input voltage 95-264V rms at a single phase that is 230V nominal. Control power AC input current Nom (@ 220/230V AC) is 3 A rms and Nom (@ 110/115V AC) is 6 A rms. The nominal bus output voltage is 650V DC. Line loss ride-through for this is 20ms. Continuous output current to bus 22.6 A (Adc) and Peak output current to bus 56.4 A (Adc). Bus overvoltage is 825V DC and Bus undervoltage is 275V DC. The peak power output at 480V is 37.5 kW. Converter peak output duration equals 400 ms with a duty cycle of 16%. Its weight is approximately 5.90kg that equals 13.0 lbs and the dimensions are 302 x 290 x 80.0 x 260 x 290 mm or 11.9 x 11.4 x 3.2 x 10.25 x 11.4 inch. Axis module (AM) inverter 460V Power Specifications include as follows. Bandwidth, Velocity loop 500 Hz and Current loop 1300 Hz. Bandwidth values vary based on tuning parameters and mechanical components. PWM frequency 4 kHz. Nominal input voltage 650V DC. Continuous current 10.3 A (rms) and Continuous current (sine) 14.6 A (0-pk). The internal shunt of continuous power is 50 W and peak power is 5.6 kW. AM Power Module 460 V weight is approximately 3.40 kg that equals 7.5 lbs. Capacitance is 270 µF and Capacitive energy absorption is 35 J.