GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2094-PR8 |
Series: | Kinetix 6000 |
Description:
The 2094-PR8 is a power rail part of the Kinetix 6000 series. This unit contains eight slots used to transfer the control signals and power between the modules. In addition, its slot capacity includes 1 IAM and seven additional. This 8-slot power rail can endure up to 15 g of operating shock and is highly fit for 230 or 460v drive systems. Also, it is compatible with the Kinetix product ranges such as 6200, 6500, 600M.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2094-PR8 is a power rail from the Kinetix 6000 power rail product line. It is an Allen Bradley Rockwell Automation product. It is an electronic unit that is applicable for the IAM modules. In addition, it is also fit for AM and shunt devices as well as the filler units. It aims to extend the functionality of the Kinetix product architecture. The primary job of this power rail, as its name implies, is to transfer power and signals from the left side IAM to the AM, fillers, and shunt units. Aside from that, it has eight axis power units, out of which includes 1 AIM and seven others (shunt, slot fillers, and AM). Like most 2094 products, it is also interoperable with the 480v and 230v units.
Additionally, it is also fit to be integrated with some of the other Kinetix product ranges. It can accept seven inverter slot systems precisely. If this range is not up to the criteria, the slots can be mounted to slot filler modules. In addition to the parameters mentioned above, this power rail, just like every power rail in the 2094 Bulletin, has inverter slot pin protections. The primary function of this inverter slot pin protection is to safeguard against any damages done by foreign materials that may attach themselves to the slot lodge. This type of function is particularly valuable to the safety and durability of this unit and its interconnected units and the overall architecture in which this machine part is used.
Question: Does Automation Stop offer repairs on the 2094-PR8?
Answer: Yes. We offer repairs for the 2094-PR8 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2094-PR8?
Answer: If you buy the 2094-PR8 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2094-PR8 online?
Answer: Yes. Automation Stop sells the 2094-PR8 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2094-PR8?
Answer: The 2094-PR8 is made by Allen Bradley - Drives.
Question: What type of product is the 2094-PR8?
Answer: The 2094-PR8 is part of the Kinetix 6000 series.
Question: What voltage is included with the 2094-PR8?
Answer: The Allen Bradley - Drives 2094-PR8 includes a voltage of 230.
For additional information about 2094-PR8 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2094-PR8.
Revision Part # | Also Known As | Availability |
---|---|---|
2094-PR8/A | 2094-PR8 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.