GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 2094-PRS8

✓ In Stock

2094-PRS8 Image 1 thumbnail
2094-PRS8 Image 2 thumbnail
Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 2094-PRS8
Series: Kinetix 6000

Description:

The 2094-PRS8 from Allen-Bradley is a power rail. This component is part of the 2094-PRS-x Series of power rails. This type has 8 inverter slots and 1 converter slot. The 2094-PRS8 8 axis power rail, which is compatible with Kinetix 6000 drive systems, delivers power from the 2096 Integrated Axis Module (IAM) to connected Axis Modules (AM) or inverters, slot filler modules, and the shunt module. This device can support up to seven additional modules and one IAM.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$152.00

Available: 49

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$122.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 2094-PRS8? We can help!

Request a Quote

Key Features:

  • is a slim power rail
  • has 24.9 x 21.7 x 10.5 in (632.5 x 551.2 x 266.7 mm) dimensions

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Allen-Bradley's 2094-PRS8 is a power rail. The 2094-PRS-x Series of power rails includes this item. There are 8 inverter slots and 1 converter slot on this model. Power is delivered from the 2096 Integrated Axis Module (IAM) to linked Axis Modules (AM) or inverters, slot filler modules, and the shunt module via the 2094-PRS8 8 axis power rail, which is compatible with Kinetix 6000 drive systems. This device can accommodate up to 7 additional modules and 1 IAM. This power rail can also accommodate one IAM, six AM, and one shunt module. This unit works with both 230 volts alternating current (AC) and 460 volts direct current (DC) power systems. A braided ground strap of 100 millimeters (3.9 inches) is included, as well as a cover for each connection slot. This cover keeps small contaminant particles out of the slot, preventing them from causing internal harm, especially if they're electrically conductive. The cover also protects the user from coming into contact with the conductor pins. Direct panel mounting is possible with the 2094-PRS8 power rail. It contains mounting holes and tables to aid in correct and secure installation. Proper grounding and bonding are required for safety, and the use of a zinc-coated subpanel or a steel panel is advised. The dimensions of the Allen-Bradley 2094-PRS8 power rail are 63.25 x 55.12 x 26.67 millimeters (24.9 x 21.7 x10.5 inches). Furthermore, utilize 2090 series motor feedback cables or connection kits, and stop the feedback wire shielding appropriately. The length of drive-to-motor feedback wires should not exceed 90 meters (295.5 feet).

Technical Specifications

Region of Manufacture* Mexico

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2094-PRS8?

Answer: Yes. We offer repairs for the 2094-PRS8 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 2094-PRS8?

Answer: If you buy the 2094-PRS8 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2094-PRS8 online?

Answer: Yes. Automation Stop sells the 2094-PRS8 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2094-PRS8?

Answer: The 2094-PRS8 is made by Allen Bradley - Drives.


Question: What type of product is the 2094-PRS8?

Answer: The 2094-PRS8 is part of the Kinetix 6000 series.


Question: What Region of Manufacture* does the 2094-PRS8 have?

Answer: The Allen Bradley-Rockwell Automation 2094-PRS8 has a Mexico Region of Manufacture*.


Series information for 2094-PRS8

For additional information about 2094-PRS8 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2094-PRS8.

Revision Part # Also Known As Availability
2094-PRS8/A 2094-PRS8 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 2094-PRSB
  • 2094-PR58
  • 2094-PR5B
  • 2O94-PRS8
  • 2O94-PRSB
  • 2O94-PR58
  • 2O94-PR5B

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP