GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-DSD-005X |
Series: | Ultra3000-5000 |
Description:
Part number 2098-DSD-005X is an Ultra3000 digital servo drive that was manufactured by Allen-Bradley. The AC input voltage of this device is 100 to 240 volts rms single-phase, with an AC input frequency of 47 to 63 hertz. It has a bus capacitance of 1410 microfarad and a bus overvoltage rating of 400 volts DC. The maximum power loss of this product is 48 watts. The 2098-DSD-005X has an approximate weight of 1.8 kilograms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2098-DSD-005X is an Ultra3000 digital servo drive, which was designed and produced by the company known as Allen-Bradley. This particular product is a two hundred and thirty (230) volt servo drive. The 2098-DSD-005X has an alternating current (AC) input voltage that ranges from one hundred (100) to two hundred and forty (240) volts rms with a single-phase. Additionally, the alternating current (AC) input frequency range is from forty-seven (47) to sixty-three (63) hertz (Hz). Furthermore, this servo drive's AC input current is five (5) amps nominal rms, as well as one hundred (100) amps max inrush 230 volts AC at 0-pk. Two-point-five (2.5) amperes at 0-pk is the output current of this drive when it operates continuously. Additionally, the intermittent output current of the 2098-DSD-005X is seven-point-five (7.5) amperes at 0-pk. This digital servo drive has a 1410 microfarad bus capacitance, as well as a bus overvoltage rating of four hundred (400) volts DC (direct current). The 2098-DSD-005X has an energy absorption capability of ninety-three (93) joules (J) at 115 volts AC input and 38 joules (J) at 230 volts AC input. Additionally, this device has a power output, when operating continuously, of zero-point-two-five (0.25) kilowatts (kW) at 115 volts AC input and zero-point-five (0.5) kilowatts (kW) at 230 volts AC input. The 2098-DSD-005X has a maximum loss of forty-eight (48) watts.
This Allen-Bradley Ultra3000 digital servo drive also has some specifications dealing with physical and environmental attributes. The ambient temperature ranges for this device are -40 to 70 degrees Celsius storage and 0 to 55 degrees Celsius operational. Additionally, the area around the device should have a relative humidity, non-condensing, of 5% to 95%. The 2098-DSD-005X has an approximate weight of 1.8 kilograms, or 4.1 pounds.
Question: Does Automation Stop offer repairs on the 2098-DSD-005X?
Answer: Yes. We offer repairs for the 2098-DSD-005X and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-DSD-005X?
Answer: If you buy the 2098-DSD-005X through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-DSD-005X online?
Answer: Yes. Automation Stop sells the 2098-DSD-005X online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-DSD-005X?
Answer: The 2098-DSD-005X is made by Allen Bradley - Drives.
Question: What type of product is the 2098-DSD-005X?
Answer: The 2098-DSD-005X is part of the Ultra3000-5000 series.
Question: What can I expect the voltage included with the 2098-DSD-005X to be?
Answer: The Allen Bradley - Drives 2098-DSD-005X has a voltage of 230.
Question: What amperage is included with the 2098-DSD-005X?
Answer: The 2098-DSD-005X includes a amperage of 7.5.
For additional information about 2098-DSD-005X check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-DSD-005X.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-DSD-005X/A | 2098-DSD-005X Ser A, Series A, Rev A | Request a Quote |
2098-DSD-005X/B | 2098-DSD-005X Ser B, Series B, Rev B | Request a Quote |
2098-DSD-005X/C | 2098-DSD-005X Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.