GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-DSD-020X |
Series: | Ultra3000-5000 |
UPC: | 662453834917 |
Description:
Part number 2098-DSD-020X is an Ultra3000 digital servo drive that was produced by the Allen-Bradley company. The AC input voltage of this drive ranges from 100 to 240 volts rms single-phase and it has an AC input frequency of 47 to 63 Hz. The continuous output current is 10 amperes at 0-pk and the intermittent output current is 30 amperes at 0-pk. It has a maximum power loss of 50 watts and weighs approximately 2.1 kilograms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2098-DSD-020X is a digital servo drive as part of the Ultra3000 series of products manufactured by Allen-Bradley. This particular drive is a two hundred and thirty (230) volt servo drive. This Allen-Bradley servo drive has an alternating current (AC) input voltage that ranges from 100 (one hundred) to 240 (two hundred and forty) volts rms single-phase. Additionally, the frequency for this device's AC input is 47 (forty-seven) to 63 (sixty-three) hertz. Furthermore, the current for the alternating current (AC) input is 18 (eighteen) amperes nominal rms, while the max inrush 230 (two hundred and thirty) volt AC at 0-pk is 100 (one hundred) amperes. At 0-pk, the output current of this servo drive, while operating continuously, is 10 (ten) amperes. Additionally, at 0-pk, the output current of this device while intermittent is 30 (thirty) amperes. One thousand eight hundred and eighty (1880) microfarad is the bus capacitance of this device and the rated bus overvoltage is 400 (four hundred) volts DC (direct current). The 2098-DSD-020X has an energy absorption capability of 125 (one hundred and twenty-five) J (joules) at an input of 115 (one hundred and fifteen) volts AC. It also has an energy absorption capability of 51 (fifty-one) J (joules) at an input of 230 (two hundred and thirty) volts AC. Furthermore, this device has multiple power outputs when operating continuously. At an input of 115 volts AC, the continuous power output is 1.0 (one) kilowatt, while at an input of 230 volts AC, it is 2.0 (two) kilowatts. It has a maximum power loss of 50 (fifty) watts and weighs approximately 2.1 kilograms, or 4.6 pounds.
Question: Does Automation Stop offer repairs on the 2098-DSD-020X?
Answer: Yes. We offer repairs for the 2098-DSD-020X and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-DSD-020X?
Answer: If you buy the 2098-DSD-020X through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-DSD-020X online?
Answer: Yes. Automation Stop sells the 2098-DSD-020X online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-DSD-020X?
Answer: The 2098-DSD-020X is made by Allen Bradley - Drives.
Question: What type of product is the 2098-DSD-020X?
Answer: The 2098-DSD-020X is part of the Ultra3000-5000 series.
Question: What amperage is included with the Allen Bradley - Drives 2098-DSD-020X?
Answer: The Allen Bradley - Drives 2098-DSD-020X includes a amperage of 10.
Question: What amperage is included with the Allen Bradley - Drives 2098-DSD-020X?
Answer: The Allen Bradley - Drives 2098-DSD-020X includes a amperage of 30.
For additional information about 2098-DSD-020X check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-DSD-020X.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-DSD-020X/A | 2098-DSD-020X Ser A, Series A, Rev A | Request a Quote |
2098-DSD-020X/B | 2098-DSD-020X Ser B, Series B, Rev B | Request a Quote |
2098-DSD-020X/C | 2098-DSD-020X Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.