GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-DSD-020X-DN |
Series: | Ultra3000-5000 |
Description:
The Allen-Bradley 2098-DSD-020X-DN is a servo drive that is capable of delivering 30 A peak output current and 10 A continuous current to the servo motor. The continuous output power is 2.68 HP. The drive supports up to 64 indexed profiles for absolute, incremental, registration, and jog mode of work and is connected to the DeviceNet interface.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 2098-DSD-020X-DN is a part of Ultra3000 series of servo drives. It can drive brushless servo motors using indexing capabilities and can receive the drive commands from the DeviceNet network. The 2098-DSD-020-SE uses an AC input voltage of 100 to 240 VAC, single phase. The continuous output power is 2.68 HP and continuous output current is 10 A. Sometimes there are requirements for intermittent output current which is 30 Amps (0-peak) and maximum inrush current of 100 Amps (0-peak). The 2098-DSD-020X-DN is indexed with 64 possible profiles and 4 modes of operation. Every profile can have its mode, such as incremental, absolute, jog and registration but also all their parameters. The mode parameters are acceleration and deceleration times and velocity, action when complete, qwell time, and many others, so operators can describe the motor behavior in every important point, using indexing method. In that case, there is no need for any PLC motion interface, as drive commands are coming from the DeviceNet network interface. During normal drive and motor operations, the drive status and possible faults are followed and can be monitored by several LED’s and seven segment indicators. The DeviceNet connection enables the remote monitoring and control, and also the troubleshooting capability. The drive's environmental conditions must be satisfied, and they include an operating temperature range of 32 to 131 degrees Fahrenheit and a relative humidity range of 5 to 95%. The drive should be stored in a temperature range of -40 to 158 degrees Fahrenheit.
Region of Manufacture* | United States |
Type | Servo Drive |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 2098-DSD-020X-DN?
Answer: Yes. We offer repairs for the 2098-DSD-020X-DN and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-DSD-020X-DN?
Answer: If you buy the 2098-DSD-020X-DN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-DSD-020X-DN online?
Answer: Yes. Automation Stop sells the 2098-DSD-020X-DN online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-DSD-020X-DN?
Answer: The 2098-DSD-020X-DN is made by Allen Bradley - Drives.
Question: What type of product is the 2098-DSD-020X-DN?
Answer: The 2098-DSD-020X-DN is part of the Ultra3000-5000 series.
Question: What Region of Manufacture* is included with the 2098-DSD-020X-DN?
Answer: The Allen-Bradley 2098-DSD-020X-DN has a United States Region of Manufacture*.
For additional information about 2098-DSD-020X-DN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-DSD-020X-DN.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-DSD-020X-DN/A | 2098-DSD-020X-DN Ser A, Series A, Rev A | Request a Quote |
2098-DSD-020X-DN/B | 2098-DSD-020X-DN Ser B, Series B, Rev B | Request a Quote |
2098-DSD-020X-DN/C | 2098-DSD-020X-DN Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.