GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-DSD-030X |
Series: | Ultra3000-5000 |
Description:
Designed and manufactured by Allen Bradley, part number 2098-DSD-030X is a digital servo drive from the Ultra3000 product series. This servo drive has an input voltage of 100 to 240 volts rms, single-phase. This product has a nominal input current rated at 28 amperes, as well as a maximum inrush input current rated at 50 amperes from 0 to peak performance at 230 volts AC. The continuous output current of this device is 10.6 amperes rms and 15 amperes from 0 to peak performance. Additionally, the peak output current of this device is 21.2 amperes rms and 30 amperes from 0 to peak performance.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Designed and manufactured by the company known as Allen Bradley / Rockwell Automation, part number 2098-DSD-030X is a digital servo drive. This servo drive belongs to the Ultra3000 series of products. The input voltage of the 2098-DSD-030X servo drive ranges from 100 to 240 volts AC rms, single-phase at an input frequency range of 47 to 63 hertz. This servo drive has a continuous output current rated at 10.6 amperes rms, as well as 15 amperes from 0 to peak performance. Additionally, this Allen Bradley product has a peak output current rated at 21.2 amperes rms and 3 amperes from 0 to peak performance. The Allen Bradley 2098-DSD-030X digital servo drive has a bus capacitance of2820 microfarad. It also has an internal shunt resistance of 35 ohms. The internal shunt of this device has a continuous power rating of 50 watts, while the peak power is rated at 4.5 kilowatts. This servo drive also has an external shunt with a resistance rating of 30 ohms, a continuous power rating of 2.4 kilowatts, and a peak power rating of 6 kilowatts. The bus overvoltage rating of this digital servo drive is 452 volts DC. The Allen Bradley 2098-DSD-030X digital servo drive has a power dissipation rating of 150 watts, plus the dissipative shunt. This product has an approximate weight of 6.20 kilograms, or the equivalent of 13.6 pounds. This servo drive should be operated in an environment where the temperature ranges from 0 to 55 degrees Celsius and should be stored in an environment where the temperature ranges from -40 to 70 degrees Celsius. The relative humidity rating that is appropriate for this device is 5% to 95% non-condensing.
Type | Servo Drive |
Question: Does Automation Stop offer repairs on the 2098-DSD-030X?
Answer: Yes. We offer repairs for the 2098-DSD-030X and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-DSD-030X?
Answer: If you buy the 2098-DSD-030X through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-DSD-030X online?
Answer: Yes. Automation Stop sells the 2098-DSD-030X online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-DSD-030X?
Answer: The 2098-DSD-030X is made by Allen Bradley - Drives.
Question: What type of product is the 2098-DSD-030X?
Answer: The 2098-DSD-030X is part of the Ultra3000-5000 series.
For additional information about 2098-DSD-030X check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-DSD-030X.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-DSD-030X/A | 2098-DSD-030X Ser A, Series A, Rev A | Request a Quote |
2098-DSD-030X/B | 2098-DSD-030X Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.