GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-DSD-075-SE |
Series: | Ultra3000-5000 |
UPC: | 662453934501 |
Description:
Part number 2098-DSD-075-SE is an Ultra3000 digital servo drive. Designed and produced by Allen Bradley, this servo drive has an input voltage range of 100 to 240 volts AC rms at a frequency range of 47 to 63 hertz. This drive is a three-phase device. It has a continuous output current rated at 35 amperes, as well as an intermittent current rated at 75 amperes from 0 to peak. The ambient operating temperature for this drive should remain within a range of 0 to 55 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This servo drive belongs to the Ultra3000 series of products. This Ultra3000 digital servo drive that was designed and manufactured by Allen Bradley / Rockwell Automation and is used in industrial automation settings and motion control systems. It supports normal and heavy-duty operations. The power requirements of this drive include an input voltage range of 100 to 240 volts AC rms at the frequency range of 47 to 63 hertz. This drive is a three-phase drive. This module's continuous output current rating is 35 amperes, and the intermittent current rating from 0 to peak is 75 amperes. This module can work on the auxiliary power supply with a 30-ampere rms nominal input current. The bus capacitance range of this drive is 4290 microfarads, and the bus overvoltage range is 452 volts DC. This drive's shunt-on power rating is 420 volts DC, and its internal shunt resistance rating is 16.5 ohms. Apart from these power requirements, the primary application of this drive that makes it different from the other modules is its ability to extend the SECROS features. It also harnesses stable power management on the motors. Additionally, it supports DeviceNet for communication and can use the RS-232 and 485 interfaces for network connectivity. The build of this drive is compact concerning its weight and dimensions, making it a cost-effective product when it comes to space, logistics, and storage in industrial locations. The industry standards also approve its hazardous and ordinary operation locations, and it is declared safe to operate in both conditions.
Question: Does Automation Stop offer repairs on the 2098-DSD-075-SE?
Answer: Yes. We offer repairs for the 2098-DSD-075-SE and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-DSD-075-SE?
Answer: If you buy the 2098-DSD-075-SE through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-DSD-075-SE online?
Answer: Yes. Automation Stop sells the 2098-DSD-075-SE online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-DSD-075-SE?
Answer: The 2098-DSD-075-SE is made by Allen Bradley - Drives.
Question: What type of product is the 2098-DSD-075-SE?
Answer: The 2098-DSD-075-SE is part of the Ultra3000-5000 series.
Question: What VAC (voltage alternating current) does the Allen Bradley - Drives 2098-DSD-075-SE have?
Answer: The 2098-DSD-075-SE has a voltage alternating current (VAC) of 240.
Question: What amperage is included with the Allen Bradley - Drives 2098-DSD-075-SE?
Answer: The Allen Bradley - Drives 2098-DSD-075-SE has a amperage of 35.
For additional information about 2098-DSD-075-SE check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-DSD-075-SE.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-DSD-075-SE/A | 2098-DSD-075-SE Ser A, Series A, Rev A | Request a Quote |
2098-DSD-075-SE/B | 2098-DSD-075-SE Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.