GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-DSD-HV050 |
Series: | Ultra3000-5000 |
UPC: | 662453959313 |
Description:
Part number 2098-DSD-HV050 is a digital servo drive that belongs to the Ultra 3000 series of products. This drive was designed and manufactured by Allen Bradley / Rockwell Automation. This drive has an input voltage range of 230 to 480 volts AC rms, three-phase. Additionally, the input frequency of this drive is 47 to 63 hertz. The continuous power output of this drive is 2.5 kilowatts at 230 volts AC and 5.0 kilowatts at 460 volts AC. This product has an approximate weight of 8.55 kilograms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2098-DSD-HV050 is an Allen Bradley Ultra 3000 Digital Servo Drive (DSD). The 2098-DSD-HV050 is specifically designed for position control applications. The 2098-DSD-HV050 supports both HMI and SCADA systems. This drive is capable of positioning devices that are powered by various servo motors. The 2098-DSD-HV050 has a three-phase input voltage rating of 230 to 460 volts AC (alternating current). The 2098-DSD-HV050 requires an input current of 7 amperes nominal for operation at a frequency range of 50 to 60 hertz. This drive has a continuous output current rating of 11 amperes from zero (0) to peak, as well as an intermittent output current rating of 22 amperes from zero (0) to peak. This device has a rated bus capacitance of 470 microfarad and an internal shunt resistance of 120 ohms. The bus overvoltage rating of the 2098-DSD-HV050 is 810 volts DC (direct current). The continuous power output of this drive is 2.5 kilowatts at an input voltage of 230 volts AC and 5.0 kilowatts at an input voltage of 460 volts AC. The ambient operating temperature of the Allen Bradley 2098-DSD-HV050 should remain within a range of 0 to 55 degrees Celsius, or 32 to 131 degrees Fahrenheit. Additionally, this ambient storage temperature of this device ranges from -40 to 70 degrees Celsius, or -40 to 158 degrees Fahrenheit. The area surrounding this drive should have relative humidity levels of 5% to 95% and be non-condensing. This drive has an approximate weight of 8.55 kilograms, or the equivalent of 18.8 pounds.
Question: Does Automation Stop offer repairs on the 2098-DSD-HV050?
Answer: Yes. We offer repairs for the 2098-DSD-HV050 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-DSD-HV050?
Answer: If you buy the 2098-DSD-HV050 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-DSD-HV050 online?
Answer: Yes. Automation Stop sells the 2098-DSD-HV050 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-DSD-HV050?
Answer: The 2098-DSD-HV050 is made by Allen Bradley - Drives.
Question: What type of product is the 2098-DSD-HV050?
Answer: The 2098-DSD-HV050 is part of the Ultra3000-5000 series.
Question: What voltage does the Allen Bradley - Drives 2098-DSD-HV050 have?
Answer: The 2098-DSD-HV050 has a voltage of 460.
Question: What amperage does the Allen Bradley - Drives 2098-DSD-HV050 have?
Answer: The 2098-DSD-HV050 by Allen Bradley - Drives has a amperage of 11.
For additional information about 2098-DSD-HV050 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-DSD-HV050.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-DSD-HV050/A | 2098-DSD-HV050 Ser A, Series A, Rev A | Request a Quote |
2098-DSD-HV050/B | 2098-DSD-HV050 Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.