GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-IPD-020-DN |
Series: | Ultra3000-5000 |
Description:
Part number 2098-IPD-020-DN is an Allen-Bradley Ultra 5000 intelligent positioning drive that has a single phase. The AC supply input to the drive is 100 to 240 volts AC (nominal rms) in a single phase at 47 to 63 Hz frequency, while the AC current is 18 amperes (rms). The continuous output power is 2.0 kW at 240 volts AC or 1.0 kW at 120 volts AC. The physical dimensions of this device measure 5.50 inches x 5.69 inches x 8.08 inches.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 2098-IPD-020-DN Ultra 5000 single axis intelligent positioning drive is a single-phase drive. These intelligent drives are programmable, have high-performance, and compact position control solutions. This technology supports the drive to be stand-alone, meaning that the operating system can independently work using the program installed and does not require human assistance. The programming is done by C-language. The input power supply is 100 to 240 volts AC (nominal rms) and 18 amperes (rms) current. The maximum inrush of input current at 230 volts AC is 100 amperes (0 peak). Output peak current is recorded to be 30 amperes and the continuous output current is 10 amperes at 0-peak. The AC input supply frequency is 47 to 63 hertz. The energy absorption capability of this device is 125 Joules at 115 volts AC input, as well as 51 Joules at 230 volts AC input. The continuous power output of this product is 1.0 kW at 115 volts AC input and 2.0 kW at 230 volts AC input. This module has a DeviceNet protocol that is a network protocol used to connect control devices for data and information exchange. These are commonly used in automation industries. For mounting this Ultra 5000 drive, operators must make sure that the housing meets IEC60529 electrical enclosure requirements of control gear. The temperature of the location should not be more than 55 degrees Celsius, and the enclosure should be on a rigid and flat surface that is free of vibrations, shocks, corrosive liquids, and vapors. The drive weighs 5.50 x 5.69 x 8.08 inches (139.70 x 144.53 x 205.23 mm).
Question: Does Automation Stop offer repairs on the 2098-IPD-020-DN?
Answer: Yes. We offer repairs for the 2098-IPD-020-DN and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-IPD-020-DN?
Answer: If you buy the 2098-IPD-020-DN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-IPD-020-DN online?
Answer: Yes. Automation Stop sells the 2098-IPD-020-DN online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-IPD-020-DN?
Answer: The 2098-IPD-020-DN is made by Allen Bradley - Drives.
Question: What type of product is the 2098-IPD-020-DN?
Answer: The 2098-IPD-020-DN is part of the Ultra3000-5000 series.
For additional information about 2098-IPD-020-DN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-IPD-020-DN.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-IPD-020-DN/A | 2098-IPD-020-DN Ser A, Series A, Rev A | Request a Quote |
2098-IPD-020-DN/B | 2098-IPD-020-DN Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.