GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

20AC072A0AYNANC0

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 20AC072A0AYNANC0
Series: PowerFlex 70

Description:

The 20AC072A0AYNANC0 PowerFlex 70 series AC drive. It is made by Allen-Bradley. This drive uses a 400 volt AC three-phase power connection and is rated for a power output of 37 kilowatts (50 horsepower). It has an E-type frame and has an IP20 NEMA Type 1 enclosure. It does not include an HIM or a communication slot. This PowerFlex drive is filtered for emissions and has a Class A emission type.


Key Features:

  • provides 72 amps
  • utilizes a e frame type
  • utilizes enhanced control
  • utilizes the blank cover interface module
  • has 37 (50) of kw(hp)
  • has 3 ph
  • has a filtered a & b frames (optional) c, d, & d frames (standard) rating
  • has manual
  • comes with Brake: yes
  • comes with resistor: no

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 20AC072A0AYNANC0 is an Allen-Bradley PowerFlex 70 series adjustable frequency AC drive. It has a voltage rating of 400 VAC and uses a three-phase power connection. This drive has an input current draw of 72 amperes at the operating frequency of 50 Hz. The rated power output is 37 kilowatts (50 horsepower). For heavy duty work, this drive has an output power rating of 30 kilowatts. The continuous output current rating is 72 amperes. The output current ratings for one minute and thirty seconds are 90 amperes and 120 amperes, respectively. This drive has an E type frame. It supports mounting using a panel mount enclosure. The enclosure is built to meet ingress protection standards of IP20 and complies with NEMA/UL Type 1 specifications. It has a blank cover in place of a human interface module to prevent the user from accidental contact with high voltage components inside the drive. The manufacturer provides user support in the form of a manual. This drive comes with an integrated brake insulated gate bipolar transistor. It does not have a built-in internal brake resistor and is filtered for emissions. The emission class for this drive is A. A communication slot is not offered with this drive. It offers enhanced control features but does not include safe torque-off functionality. No feedback features are provided for this drive, however, it does include enhanced control. This drive requires a mounting clearance of at least 3 inches above and below the drive, which must only be installed in a vertical orientation.

Technical Specifications

Manufacturer Allen Bradley/Rockwell Automation
Series PowerFlex 70 Adjustable Frequency AC Drives
Voltage 400V AC
Ph. 3
Amps 72
kW 37
HP 50
Frame E
Enclosure Panel Mount - IP 20, NEMA/UL Type 1
Interface Module Blank Cover
Type Manual
w/Brake IGBT Yes
w/Resistor No
Rating Filtered A & B Frames (Optional) C, D, & E Frames (Standard)
Network Type None
Control Enhanced
Safe-Off No
Feedback No Feedback - Enhanced Control
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 20AC072A0AYNANC0?

Answer: Yes. We offer repairs for the 20AC072A0AYNANC0 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 20AC072A0AYNANC0?

Answer: If you buy the 20AC072A0AYNANC0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 20AC072A0AYNANC0 online?

Answer: Yes. Automation Stop sells the 20AC072A0AYNANC0 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 20AC072A0AYNANC0?

Answer: The 20AC072A0AYNANC0 is made by Allen Bradley - Drives.


Question: What type of product is the 20AC072A0AYNANC0?

Answer: The 20AC072A0AYNANC0 is part of the PowerFlex 70 series.


Question: What amperes does the 20AC072A0AYNANC0 have?

Answer: The amperes of the 20AC072A0AYNANC0 is 72.


Question: What Control does the 20AC072A0AYNANC0 have?

Answer: The 20AC072A0AYNANC0 has a Enhanced Control.


Question: What is the Enclosure of the Rockwell-Automation 20AC072A0AYNANC0?

Answer: The Rockwell-Automation 20AC072A0AYNANC0 has a Enclosure of panel Mount - IP 20, NEMA/UL Type 1.


Question: Does the 20AC072A0AYNANC0 have a Feedback?

Answer: No Feedback - Enhanced Control.


Question: What Frame does the 20AC072A0AYNANC0 have?

Answer: The Rockwell-Automation 20AC072A0AYNANC0 has a E Frame.


Question: What is the HP of the 20AC072A0AYNANC0?

Answer: The HP of the Allen Bradley Automation 20AC072A0AYNANC0 is 50.


Question: What Interface Module is included with the Allen Bradley 20AC072A0AYNANC0?

Answer: The Allen Bradley 20AC072A0AYNANC0 has a Blank Cover Interface Module.


Question: What is the kW of the 20AC072A0AYNANC0?

Answer: The 20AC072A0AYNANC0 has a kW of 37.


Question: Does the 20AC072A0AYNANC0 have a Network Type?

Answer: None.


Question: What is the Ph. of the 20AC072A0AYNANC0?

Answer: The Allen Bradley Automation 20AC072A0AYNANC0 has a Ph. of 3.


Question: What Rating is included with the 20AC072A0AYNANC0?

Answer: The Allen Bradley Automation 20AC072A0AYNANC0 has a Filtered A & B Frames (Optional) C, D, & E Frames (Standard) Rating.


Question: What Voltage does the 20AC072A0AYNANC0 have?

Answer: The Voltage of the 20AC072A0AYNANC0 is 400 volts alternating current (AC).


Series information for 20AC072A0AYNANC0

For additional information about 20AC072A0AYNANC0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20AC072A0AYNANC0.

Revision Part # Also Known As Availability
20AC072A0AYNANC0/A 20AC072A0AYNANC0 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 20AC072A0AYNANCO
  • 20AC072AOAYNANC0
  • 20AC072AOAYNANCO
  • 20ACO72A0AYNANC0
  • 20ACO72A0AYNANCO
  • 20ACO72AOAYNANC0
  • 20ACO72AOAYNANCO
  • 2OAC072A0AYNANC0
  • 2OAC072A0AYNANCO
  • 2OAC072AOAYNANC0
  • 2OAC072AOAYNANCO
  • 2OACO72A0AYNANC0
  • 2OACO72A0AYNANCO
  • 2OACO72AOAYNANC0
  • 2OACO72AOAYNANCO

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP