GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20AD011A3AYYANC0 |
Series: | 20AD |
Description:
The Allen-Bradley 20AD011A3AYYANC0 is a variable frequency drive that is part of the Powerflex 70 product line. It has a current rating of 11 amperes at 7.5 horsepower with a three-phase power supply of 480 volts. It complies with IP20/NEMA/UL 1 standards housing set up and is devoid of feedback and communication modules. Additionally, it has a numeric keypad, an LCD display with an EMC filter and a communication mode toggle. Additionally, it has a brake IGBT with an internal brake resistor, a C size frame, enhanced control with 24V I/O, and a second filter for the environment in compliance with CE EMC regulation (89/336/EEC).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 20AD011A3AYYANC0 is a PowerFlex 70 adjustable frequency AC drive that is capable of handling a wide range of applications and is powered by a 480 volt AC, three-phase power supply. The current flow rate is 11 amperes at 7.5 horsepower rated power during normal operation, and the same characteristics are seen under heavy operation as well. A conformal coated IP20 / NEMA Type 1 enclosure is available for panel installation. This device has a frame size of C and also no internal communication unit, but it does contain IGBT brakes with a brake resistance and a secondary environment filter in accordance with the CE EMC standard (89/336/EEC). A whole numeric keypad, as well as a human interface module (HIM) and a liquid crystal display (LCD), are all included in this module's design. Due to the fact that its composition will be put on the drive, it is possible that the lead time may increase. This device has an output current flow of 11 amperes continuously, 12.1 amperes for one minute, and 16.5 amperes for three seconds. It enhances performance by using an updated control system and vector control capabilities, however, it does not support ScanPort since its vector control is off. Because of its adaptability, its control method using vectors with FORCE Advanced technologies is ideal for a broad variety of applications, including fans and extruders. Internal communication modules, which are available as options, allow control and/or data interchange with host controllers. These modules communicate with host controllers using a number of standard interfaces.
Manufacturer | Allen Bradley/Rockwell Automation |
Series | PowerFlex 70 Adjustable Frequency AC Drives |
Voltage | 480V AC |
Ph. | 3 |
Amps | 11 |
kW | 5.5 |
HP | 7.5 |
Frame | C |
Enclosure | Panel Mount - IP 20, NEMA/UL Type 1 |
Interface Module | Full Numeric LCD |
Type | Manual |
w/Brake IGBT | Yes |
w/Resistor | Yes |
Rating | Filtered A & B Frames (Optional) C, D, & E Frames (Standard) |
Network Type | None |
Control | Enhanced |
Safe-Off | No |
Feedback | No Feedback - Enhanced Control |
Question: Does Automation Stop offer repairs on the 20AD011A3AYYANC0?
Answer: Yes. We offer repairs for the 20AD011A3AYYANC0 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20AD011A3AYYANC0?
Answer: If you buy the 20AD011A3AYYANC0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20AD011A3AYYANC0 online?
Answer: Yes. Automation Stop sells the 20AD011A3AYYANC0 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20AD011A3AYYANC0?
Answer: The 20AD011A3AYYANC0 is made by Allen Bradley - Drives.
Question: What is the amperes of the 20AD011A3AYYANC0?
Answer: The amperes of the 20AD011A3AYYANC0 is 11.
Question: What Control does the 20AD011A3AYYANC0 have?
Answer: The Allen Bradley Automation 20AD011A3AYYANC0 has a Enhanced Control.
Question: What is the Enclosure of the 20AD011A3AYYANC0?
Answer: The Enclosure of the Rockwell-Automation 20AD011A3AYYANC0 is panel Mount - IP 20, NEMA/UL Type 1.
Question: Does the Allen Bradley 20AD011A3AYYANC0 have a Feedback?
Answer: No Feedback - Enhanced Control.
Question: What Frame does the 20AD011A3AYYANC0 have?
Answer: The Allen Bradley Automation 20AD011A3AYYANC0 has a C Frame.
Question: What is the HP of the Rockwell-Automation 20AD011A3AYYANC0?
Answer: The HP of the 20AD011A3AYYANC0 is 7.5.
Question: What Interface Module is included with the Rockwell Automation 20AD011A3AYYANC0?
Answer: The Rockwell Automation 20AD011A3AYYANC0 has a Full Numeric LCD Interface Module.
Question: What is the kW of the 20AD011A3AYYANC0?
Answer: The kW of the Allen Bradley/Rockwell Automation 20AD011A3AYYANC0 is 5.5.
Question: Does the Rockwell Automation 20AD011A3AYYANC0 have a Network Type?
Answer: None.
Question: What Ph. does the Rockwell Automation 20AD011A3AYYANC0 have?
Answer: The 20AD011A3AYYANC0 has a Ph. of 3.
Question: What Rating is included with the 20AD011A3AYYANC0?
Answer: The Allen-Bradley 20AD011A3AYYANC0 has a Filtered A & B Frames (Optional) C, D, & E Frames (Standard) Rating.
Question: What is the Voltage of the 20AD011A3AYYANC0?
Answer: The Voltage of the Allen-Bradley 20AD011A3AYYANC0 is 480 volts AC (alternating current).
For additional information about 20AD011A3AYYANC0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20AD011A3AYYANC0.
Revision Part # | Also Known As | Availability |
---|---|---|
20AD011A3AYYANC0/A | 20AD011A3AYYANC0 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.