GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20BD034A0AYNANC0 |
Series: | PowerFlex 700 |
Description:
The Allen-Bradley 20BD034A0AYNANC0 has a horsepower rating of 25 Horse Power. It comes with a UL NEMA type 1 rating for its enclosure. The rating is also referred to as IP20. There are 2 frame sizes for this Allen-Bradley module. The power requirement of this Allen-Bradley module is 480 volts alternating current. With this unit, there is a blank cover where the human interface module would be installed. Its I/O voltage rating on this unit is twenty-four (24) volts AC/DC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 20BD034A0AYNANC0 is a type of operator interface. There is a blank cover with this operator interface. The voltage rating on this module is 480 volts alternating current, 3-phase voltage. There is a IP20 Type 1 enclosure. For an added layer of protection, this operator interface comes with a conformal coating. This heavy-duty module has a 20 horsepower rating. There is no HMI brake or IGBT. Users also get access to a drive-mounted brake resistor. This unit does not come with any communication module. 24-volt I/O is required for the vector regulation. It can be relied upon for heavy-duty industrial work.
It was ideally designed and manufactured to be used with 3-phase induction engines. It will work smoothly with motors that require high torque speed, as well as motors that require simple motion regulation. It comes equipped with the Allen-Bradley flagship force technology. Thanks to this technology, users will experience efficient engine control. Users can adjust the lifting, speed, and positioning applications precisely for each app. When the optimal design is activated, users have the option of achieving an extra layer of power consumption, regulation, and enclosure. The horsepower rating may vary among 0.25-50 horsepower, 0.5-75 horsepower, or 0.25-100 horsepower.
Thanks to the built-in pull apart regulation terminal block, users enjoy easy wiring and quick disconnection. This interface module is compatible with multiple PC tools. In order to save panel space, components such as standard mode chokes, internal communication alternatives, integral EMC filters, and even brake transistors have an efficient design.
Manufacturer | Allen Bradley/Rockwell Automation |
Series | PowerFlex 700 AC Drives |
Voltage | 480V AC |
Ph. | 3 |
Prechg. | - |
Amps | 34 |
Hp | 25 |
Frame | 2 |
Enclosure | IP 20, NEMA/UL Type 1 |
Operator Interface | Blank Cover |
Documentation | Manual |
w/Brake IGBT | Yes |
w/Resistor | No |
CE Filter | Yes |
CM Choke | Yes |
Network Type | None |
Control | Vector |
I/O Volts | 24V DC |
Type | None |
Question: Does Automation Stop offer repairs on the 20BD034A0AYNANC0?
Answer: Yes. We offer repairs for the 20BD034A0AYNANC0 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20BD034A0AYNANC0?
Answer: If you buy the 20BD034A0AYNANC0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20BD034A0AYNANC0 online?
Answer: Yes. Automation Stop sells the 20BD034A0AYNANC0 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20BD034A0AYNANC0?
Answer: The 20BD034A0AYNANC0 is made by Allen Bradley - Drives.
Question: What type of product is the 20BD034A0AYNANC0?
Answer: The 20BD034A0AYNANC0 is part of the PowerFlex 700 series.
Question: What amperes does the 20BD034A0AYNANC0 have?
Answer: The amperes of the Allen Bradley-Rockwell Automation 20BD034A0AYNANC0 is 34.
Question: Does the 20BD034A0AYNANC0 have a CE Filter?
Answer: Yes.
Question: Does the Allen Bradley/Rockwell Automation 20BD034A0AYNANC0 have a CM Choke?
Answer: Yes.
Question: What Control is included with the 20BD034A0AYNANC0?
Answer: The 20BD034A0AYNANC0 has a Vector Control.
Question: What Documentation is included with the Rockwell-Automation 20BD034A0AYNANC0?
Answer: The Rockwell-Automation 20BD034A0AYNANC0 has a Manual Documentation.
Question: What Enclosure does the 20BD034A0AYNANC0 have?
Answer: The Allen Bradley-Rockwell Automation 20BD034A0AYNANC0 has a Enclosure of IP 20, NEMA/UL Type 1.
Question: What Frame does the 20BD034A0AYNANC0 have?
Answer: The 20BD034A0AYNANC0 has a Frame of 2.
Question: What is the Hp of the Allen Bradley/Rockwell Automation 20BD034A0AYNANC0?
Answer: The Allen Bradley/Rockwell Automation 20BD034A0AYNANC0 has a Hp of 25.
Question: What is the input/output Volts of the 20BD034A0AYNANC0?
Answer: The 20BD034A0AYNANC0 has a input/output Volts of 24 volts direct current.
Question: Does the Allen-Bradley 20BD034A0AYNANC0 have a Network Type?
Answer: None.
Question: What operator interface component is included with the 20BD034A0AYNANC0?
Answer: The 20BD034A0AYNANC0 has a Blank Cover operator interface component.
Question: What is the Ph. of the 20BD034A0AYNANC0?
Answer: The Ph. of the Allen Bradley-Rockwell Automation 20BD034A0AYNANC0 is 3.
Question: What Prechg. is included with the 20BD034A0AYNANC0?
Answer: The 20BD034A0AYNANC0 has a - Prechg..
Question: What is the Voltage of the 20BD034A0AYNANC0?
Answer: The 20BD034A0AYNANC0 has a Voltage of 480 volts alternating current (AC).
For additional information about 20BD034A0AYNANC0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20BD034A0AYNANC0.
Revision Part # | Also Known As | Availability |
---|---|---|
20BD034A0AYNANC0/A | 20BD034A0AYNANC0 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.