GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20BD077A3AYNANC0 |
Series: | PowerFlex 700 |
Description:
The Allen-Bradley 20BD077A3AYNANC0 PowerFlex 700 AC drive holds a capacity of 77 AMP and has a horsepower rating of 60. This drive also has a frame size of four and requires a 3 phase 480 VAC power supply. The 20-HIM-A3 LCD/keypad human interface module unit is placed on this AC drive, which is housed in an IP20, NEMA UL type 1 enclosure. The 20BD077A3AYNANC0 has status LEDs installed on the drive's lid to monitor the drive's communication and networking status.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 20BD077A3AYNANC0 adjustable frequency AC drive is part of Allen-PowerFlex Bradley's 700 series. It may be stored at temperatures ranging from -40 to 70 degrees Celsius in the ambient environment. The machine can operate in temperatures ranging from 0 to 50 degrees Celsius. The relative humidity of this module ranges from 5 to 95 percent. The device can also operate at a height spanning 1000 meters (3300 feet) without derating. The 20BD077A3AYNANC0 also has a 15 g shock resistance rating with an 11-millisecond duration. Various regulatory standards are met by the 20BD077A3AYNANC0. The 20BD077A3AYNANC0 has an inbuilt Electromagnetic capability filter that satisfies the Electromagnetic capability directive's second ambient level without the need for additional components. On the drive's input, the 20BD077A3AYNANC0 hardware is inclusive of a bridge that is fully gated or diode. It also has a DC bus inductor, which is used to switch logic power supplies that are powered by the DC bus. The nominal bus voltage for the 20BD077A3AYNANC0 is 648 VDC. The Allen-Bradley drives have MOV protection with phase to phase and phase to ground units, as well as jumpers that allow the phase to ground unit to be removed as necessary. The Allen-Bradley drive has status LEDs installed on the drive's lid to control and observe the drives' communication and networking position, as well as to facilitate troubleshooting. The braking IGBT is already fitted. The drive will trip due to overvoltage if the AC input reaches 570 VAC, while the undervoltage trip rate is 280 VAC.
Manufacturer | Allen Bradley/Rockwell Automation |
Series | PowerFlex 700 AC Drives |
Voltage | 480V AC |
Ph. | 3 |
Prechg. | - |
Amps | 77 |
Hp | 60 |
Frame | 4 |
Enclosure | IP 20, NEMA/UL Type 1 |
Operator Interface | LCD Display, Full Numeric Keypad |
Documentation | Manual |
w/Brake IGBT | Yes |
w/Resistor | No |
CE Filter | Yes |
CM Choke | Yes |
Network Type | None |
Control | Vector |
I/O Volts | 24V DC |
Type | None |
Question: Does Automation Stop offer repairs on the 20BD077A3AYNANC0?
Answer: Yes. We offer repairs for the 20BD077A3AYNANC0 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20BD077A3AYNANC0?
Answer: If you buy the 20BD077A3AYNANC0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20BD077A3AYNANC0 online?
Answer: Yes. Automation Stop sells the 20BD077A3AYNANC0 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20BD077A3AYNANC0?
Answer: The 20BD077A3AYNANC0 is made by Allen Bradley - Drives.
Question: What type of product is the 20BD077A3AYNANC0?
Answer: The 20BD077A3AYNANC0 is part of the PowerFlex 700 series.
Question: What amperes does the 20BD077A3AYNANC0 have?
Answer: The amperes of the 20BD077A3AYNANC0 is 77.
Question: Does the 20BD077A3AYNANC0 have a CE Filter?
Answer: Yes.
Question: Does the 20BD077A3AYNANC0 have a CM Choke?
Answer: Yes.
Question: What Control does the 20BD077A3AYNANC0 have?
Answer: The Rockwell-Automation 20BD077A3AYNANC0 has a Vector Control.
Question: What Documentation does the Allen Bradley Automation 20BD077A3AYNANC0 have?
Answer: The Allen Bradley Automation 20BD077A3AYNANC0 has a Manual Documentation.
Question: What is the Enclosure of the Allen-Bradley 20BD077A3AYNANC0?
Answer: The Enclosure of the Allen-Bradley 20BD077A3AYNANC0 is IP 20, NEMA/UL Type 1.
Question: What is the Frame of the 20BD077A3AYNANC0?
Answer: The Frame of the 20BD077A3AYNANC0 is 4.
Question: What is the Hp of the 20BD077A3AYNANC0?
Answer: The Hp of the Allen Bradley-Rockwell Automation 20BD077A3AYNANC0 is 60.
Question: What is the input/output Volts of the Allen Bradley/Rockwell Automation 20BD077A3AYNANC0?
Answer: The input/output Volts of the 20BD077A3AYNANC0 is 24 volts DC (direct current).
Question: Does the Allen-Bradley 20BD077A3AYNANC0 have a Network Type?
Answer: None.
Question: What operator interface component does the 20BD077A3AYNANC0 have?
Answer: The 20BD077A3AYNANC0 has a LCD Display, Full Numeric key operator interface.
Question: What Ph. does the 20BD077A3AYNANC0 have?
Answer: The Ph. of the 20BD077A3AYNANC0 is 3.
Question: What Prechg. is included with the Rockwell Automation 20BD077A3AYNANC0?
Answer: The Rockwell Automation 20BD077A3AYNANC0 has a - Prechg..
Question: What is the Voltage of the Allen Bradley 20BD077A3AYNANC0?
Answer: The Voltage of the Allen Bradley 20BD077A3AYNANC0 is 480 volts AC (alternating current).
For additional information about 20BD077A3AYNANC0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20BD077A3AYNANC0.
Revision Part # | Also Known As | Availability |
---|---|---|
20BD077A3AYNANC0/A | 20BD077A3AYNANC0 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.