The Allen-Bradley 22A-D8P7N104 PowerFlex 4 adjustable frequency AC drive provides a full-featured 4 digits alphanumeric human interface liquid crystal (LCD) display module to show either parameter number and value or fault code with an integral keypad to program and control using the local potentiometer both torque and speed of three-phase induction motors in industrial applications. This Allen-Bradley PowerFlex 4 adjustable frequency AC drive includes an internal dynamic IGBT brake that saves efficiently switching regenerative energy without adding external chopper circuits. The Allen-Bradley 22A-D8P7N104 can be mounted with an input circuit breaker or fuses. This Allen-Bradley adjustable frequency AC drive produces torque efficiently over a large speed range and offers sensorless vector control. The Allen-Bradley 22A-D8P7N104 AC drive supports shielded and unshielded cables for wiring and installation. The Allen-Bradley 22A-D8P7N104 provides removable MOV to ground ungrounded distribution systems to increase motor life. The Allen-Bradley 22A-D8P7N104 provides an efficient integral electromagnetic compatibility (EMC) filtering and external filters to meet EMC needs. This hardware includes relay pre-charge to limit inrush current.

This Allen-Bradley 22A-D8P7N104 PowerFlex 4 drive contains 10 LED indicators that report and display visual notification of drive status and information. The Allen-Bradley 22A-D8P7N104 AC drive supports an input voltage rating of 480 volts AC and current consumption of 8.7 amperes with a maximum power rating of 5 horsepower and 3.7 kilowatts. This Allen-Bradley 22A-D8P7N104 supports the RS485 (DSI) protocol to communicate with Rockwell Automation devices and to program from a PC. The 22A-D8P7N104 AC drive is constructed to meet the IP20 and NEMA Type open enclosure ratings. The Allen-Bradley 22A-D8P7N104 can be installed vertically on 35 millimetres DIN on B frame drives or using M4 screws. It offers an adjustable pulse width modulation (PWM) frequency up to 16 kHz to ensure proper operation. This adjustable frequency AC drive can operate at a temperature range of 10 degrees to 50 degrees Celsius (14 degrees to 122 degrees Fahrenheit) for industrial applications from fans to extruders and weighs approximately 2.2 kilograms (4.1 pounds) while shipping.

The 22A-D8P7N104 PowerFlex 4 adjustable frequency AC drive from Allen Bradley has an input voltage range of 340 volts to 528 volts. When it comes to this product's inputs, the 22A-D8P7N104 has a power rating of 8.6 kilovolt-amperes (kVA). Additionally, the input current of this adjustable frequency AC drive is nine (9.0) amperes. This Allen Bradley product has a total of fifteen (15) fuses. This Allen Bradley adjustable frequency AC drive is compatible with the 140M-C2E-C16 motor, as well as the 100-C16 contactor. The minimum enclosure volume of this Allen Bradley product is 1655 cubic inches (in³). The 22A-D8P7N104 has a programmable output frequency that ranges from 0 hertz to 240 hertz. Additionally, it has a typical efficiency rating of 97.5 percent. The total amount of watts lost by the Allen Bradley 22A-D8P7N104 adjustable frequency AC drive is one hundred and fifty (150) watts, which is divided into one hundred and twenty-five (125) external watts lost and twenty-five (25) internal watts lost. This product is equipped with overvoltage protection and undervoltage protection. The overvoltage protection trips when the bus voltage reaches 810 volts direct current (DC), while the undervoltage protection trips when the bus voltage reaches 390 volts direct current (DC). The control ride through of this AC drive is 0.5 seconds. Additionally, the faultless power ride through is 100 milliseconds. The Allen Bradley 22A-D8P7N104 adjustable frequency AC drive can withstand an operating shock rated up to a 15 G peak for a duration of 11 milliseconds. Also, it can withstand a vibration with a 1 G peak at a frequency of 5 to 2000 hertz.