The Allen-Bradley 22B-D2P3N104 is a 3-phase, 2.3 Ampere PowerFlex 40 Adjustable Frequency Drive (AFD) for use in demanding industrial and production environments. This PowerFlex 40 drive requires an AC input of 480 Volts AC at a frequency range of 50 Hertz to 60 Hertz. The Allen-Bradley 22B-D2P3N104 is a B frame series drive unit which makes use of a NEMA/UL IP20 type of open enclosure. This drive can be quickly and easily installed through the use of the DIN rail. This drive unit conforms with a wide range of certifications and approvals, including CUL, UL, EAC, KCC, and CE. This drive unit includes a whole suite of efficiency and performance optimization features. These include sensorless vector control, relay pre-charging, protection from overloads, and adjustable pulse width modulation (PWM) frequency. Together, these features allow for unusually quiet level of operation, and this drive’s use of source control grants added wiring flexibility.

The 22B-D2P3N104 PowerFlex 40 Drive employs an integral PID loop for control of a wide range of functions. A qualified operator can configure a variety of process feedback reference points, including pressure, flow, and tension. These parameters are then employed within the PID loop so as to generate error values. This system greatly improves application versatility and overall flexibility of the unit. This drive unit also makes use of an optionally removable metal oxide varistor (MOV), allowing it to function safely with an ungrounded system. Its ground fault protection ensures reliable operation in the start and running phase of the motor. The 22B-D2P3N104 also makes use of a Class 10-rated overload protection capacity. The overload protection permits a total of 150% for up to 60 seconds, or 200% for a total of up to 3 seconds.

 The Allen-Bradley 22B-D2P3N104 has a 50 to 60 Hertz frequency and 480 Volt input voltage, as well as an IP20 NEMA/UL type open enclosure. This 3-phase PowerFlex 40 Adjustable Frequency AC drive comes with a 2.3 Amp, 0.75 kW (1.0 Horsepower) output rated unit. Sensorless vector control, robust overload protection, relay pre-charge, detachable MOV, adjustable PWM frequency for silent operation, and source control for wiring flexibility are among the enhanced performance characteristics. The DIN rail is used to quickly and easily install a B frame. Proportional, integral, and differential functions in the 22B-D2P3N104 PowerFlex 40 Drive are all controlled with the help of an Integral PID loop. Tension, flow, and pressure are all process feedbacks that can be adjusted by the user. To increase the application flexibility, The PID loop will then use these reference points to create error values. Basic trim control and exclusive control are both used with this drive. UL, CUL, KCC, and EAC certifications and approvals are included in the CE-marked Drive. systems that aren't grounded can be operated, using the detachable MOV. Its ground fault prevention provides dependable functioning during the motors start and run phases. It includes 200 percent motor overload protection for 3 seconds. and a 150 percent motor overload protection for 60 seconds. It also has a 200 percent hardware limit and a 300 percent instantaneous fault to protect against overcurrent. The 22B-D2P3N104 VFDs can accomplish precise Speed and Torque Regulation with high beginning Torque capabilities thanks to Sensorless Vector Control. The integrated RS485 connection port or extra communication modules that the 22B-D2P3N104 supports may be utilized for complete integration to control systems, especially Logix Programmable Automation Controller (PAC) platforms. Drive parameters are directly connected to controller memory, which may be changed according to use logic and assigned with multiple triggers to dynamically change the drive configuration. The 22B-D2P3N104 is powered by a 342-528VAC 3-phase input voltage supply with a 48-63 Hz input frequency and a current of 3.2 amperes. The drive features an 0-460VAC 3-phase output voltage, a frequency of 0-400Hz, and a continuous current of 2.3 Amperes. The motor must be rated at 0.75 kW or 1.0 horsepower. Three fixed discrete inputs, Four fully programmable discrete inputs, One N.O. / N.C. and Two Digital / Optocoupler outputs, Two unipolar and One Bipolar analog inputs, and One analog output channel are also included in this drive.