The Allen-Bradley 25A-D010N104 is a PowerFlex 523 Adjustable Frequency AC Drive that provides a full-featured four digits alphanumeric human interface liquid crystal (LCD) display module to show either parameter number and value or fault code with an integral digital keypad to program and control employing the local potentiometer both torque and speed of three-phase induction motors in industrial applications. The 25A-D010N104 can be mounted with an input circuit breaker or fuses. This variable frequency controller produces torque efficiently over a large speed range and offers sensorless vector control. The device supports shielded and unshielded cables for wiring and installation. The VFD provides removable MOV to ground ungrounded distribution systems to increase motor life. This drive includes relay pre-charge to limit inrush current. The unit includes a single analog input and output. The device has also five (5) digital inputs and one (1) relay output.

The 25A-D010N104 includes four (4) LED indicators that report and display visual notification of drive status and information. This VFD supports an input voltage of 480 Volts AC and a current consumption of 10.5 Amperes with a maximum power rating of 5 horsepower and 4 Kilowatts. This device supports the RS-485 (DSI) protocol to communicate with Rockwell Automation devices and to be programmed by a PC. The 25A-D010N104 is conceived to meet the IP20 and NEMA Type open enclosure ratings. This unit can be installed vertically on a 35-millimeter DIN on B frame drives or using M4 screws. This VFD offers an adjustable pulse width modulation (PWM) frequency of up to 16 Kilohertz to ensure proper operation. The 25A-D010N104 can operate at a temperature range of -20 to 50 degrees Celsius (-4 to 122 degrees Fahrenheit) for industrial applications from fans to extruders and weighs approximately 1.6 Kilograms (3.5 pounds) while shipping.

The 25A-D010N104 only comes with one RS-485 communication port. This AC drive only comes with support for two control methods – the volts/hertz and the SVC method. Along with the RS-485 protocol, this AC drive also comes with multiple optional protocols for communication, including the ProfiBus and Ethernet protocols. This AC drive is part of the 523 series from Allen-Bradley. It needs to be supplied with a voltage of 480 volts alternating current. For protection against dust and toxic gas, this drive should be placed inside one IP20 rated enclosure. This drive can also be used with a NEMA or an open type enclosure. This standard interface should be used on a B sized frame. Users can program the parameters and the operations of this drive individually. It can also be integrated with PAC modules as per requirement. This AC drive comes with one USB port. This port helps with programming this module. Thanks to the integrated PID, this drive offers a number of flexible options. Also, the PointStop feature offers a wide range of control methods. This AC drive is ideal for standalone industrial applications. The modular design helps with easy installation. 

The 25A-D010N104 can be operated at a maximum temperature of 70 degrees Celsius. The modular design helps with easy configuration and continuous installation. The RS-485 and the DSI port allows economic networking. It supports the following industrial parameters – ramp-up, acceleration, deceleration, motor ramp and others.