The PowerFlex 525 series AC drive 25B-D2P3N104 is rated for three phase 480 Volt alternate current motors. The output current is 2.3 Amperes and frame designation has a normal and heavy duty power rating of 1 horsepower (0.75 Kilowatts). It has an IP 20 rated NEMA open type enclosure with a standard interface module, standard braking, and no filter emission class. The drive is equipped with two analog inputs – one unipolar and one bipolar. They are separately isolated from the body of the drive I/O. The input configuration can be toggled with a digital signal. In addition, there are seven digital inputs for custom programming solutions. Six out of the seven digital inputs are programmable. The single analog 10-bit output is jumper selectable between 0 to 10 volts or 0 to 20 milliamps. It is typically used for metering or as a reference speed to another drive. The drive also has two Opto outputs and two relay outputs of form A and B each. These are used for status signals from drives, motors, and their logic controllers. For network communication, there is an in-built Ethernet/IP port which allows for convenient configuration, control, and data acquisition over the network. The drive offers closed loop control with an additional encoder card for feedback that improves speed or position control. The drive provides easy to use PC programming options where components can be connected with Workbench. The straight forward plug-and-play setup can be utilized with USB connections. The AppView tool has the common parameter groups and new parameter groups can be created with CustomView tool.

The 25B-D2P3N104 is a PowerFlex 525 series Frequency AC drive designed and manufactured by Allen-Bradley. The drive has an input voltage rating of 323 to 528 Volts and a total power loss of 37.0 watts. The maximum input KVA rating of this drive is 2.9 KVA and an input current rating of 3.2 amperes. The 25B-D2P3N104 AC drive has an A-frame size open-type enclosure. On normal duty, the AC drive has an output horsepower of 1.0 hp and power of 0.75 kilowatts and on heavy-duty, the AC drive has an output horsepower of 1.0 hp and power of 0.75 kilowatts, while the output current is 2.3 amperes, making it approximately 85% efficient. This drive includes built-in safety measures such as automated BUS voltage management and fast-acting current limiting, as well as a Safe Torque-Off function that is shared by all PowerFlex 525 drives. The PowerFLex 520 series drives include a detachable control module and power module, allowing for simultaneous configuration and installation. With the MainsFree setup, you may connect your control module to a PC using a regular USB cable and instantly upload, download, and flash the drive with new settings. The 25B-D2P3N104 can accommodate up to two accessory cards. The 25B-D2P3N104 interacts through an embedded Ethernet/IP port, allowing control of the Ethernet network, as well as an inbuilt RS-485 serial interface, allowing for a multi-drop communication setup. The recommended operating temperature for the AC drive is between -20 to 50 degrees Celsius without derating. The 25B-D2P3N104 AC drive is ATEX, KCC, KUV, CE, RCM, and cUL-us certified. The drive has dimensions of 152 x 72 x 172 millimeters and weighs 1.1 kg or 2.4 pounds.

Part number 25B-D2P3N104 is a frequency AC drive that was manufactured by Allen-Bradley as part of their PowerFlex 525 line of products. With a rated input voltage ranging from 323 to 528 volts, this Allen-Bradley drive has a total loss of power of thirty-seven (37.0) Watts. The max input kVA rating of this product is 2.9 kVA, and it has an rated input current of just 3.2 amperes (amps). The 25B-D2P3N104 AC drive has a frame size of A and features a design utilizing an open-type enclosure. When operating on normal duty, this Allen-Bradley frequency drive has an output of one point zero (1.0) horsepower, or Hp. The power of this device is 0.75 kilowatts (kW). Additionally, when operating on heavy-duty, this drive also has an output of one point zero (1.0) Hp and a power of 0.75 kilowatts (kW). The output current for this product is 2.3 amperes, thus making it approximately eighty-five percent (85%) efficient. This Allen-Bradley product offers accessory card support without the worry of having the footprint change. Additionally, this drive can use up to 2 (two) accessory cards at a time. By interacting through the embedded Ethernet/IP port, the Allen-Bradley 25B-D2P3N104 can allow its user to take control of the Ethernet network. An embedded RS-485 serial interface is also built into the device. The operating temperature recommended for this frequency AC drive ranges from -20 (negative twenty) to 50 (fifty) degrees Celsius without derating. This product has dimensions of 152 mm x 72 mm x 172 mm and a weight of 1.1 kg, or the equivalent of 2.4 pounds.