The Allen-Bradley 2711-M3A18L1 belongs to PanelView Standard Operator models of terminals. This operator panel has a 2.88 x 1.66 inches screen. The top height for the panel to be mounted to run safely should be 2000 meters. Make sure to leave an access to the behind of the panel in order to carry out wiring and troubleshooting responsibility correctly. To properly illuminate the screen, the terminal uses a backlight, whose typical life of about 11 years of use. The internal clock of the device manages to timestamp all meaningful data. The sites where the model will be installed need to comply to IEC-1131-2 pollution protection 2 (only-non conductive alteration is consented). A gateway over a network may be exploited to simply to transfer programs to the module. Data transmission with additional systems like PLCs or SLCs, can be achieved using the RS-232 (DH-485) slot of the system. The two Indicators the terminal will give the operator some information about the functioning of the panel. The limit vibration that the device is able to sustain is 2 g below 2000 hertz. The touchscreen interface of the terminal may be used by anyone to interact easily with it and configured for all its features.

For ease of use, the Allen-Bradley 2711-M3A18L1 comes with four function keys and a keyboard operator interface. This electronic hardware requires a nominal input voltage of 24 VDC. It is widely used with industrial machinery to provide real-time monitoring. It comes with an interface to track the status of machines and industrial processes. When it comes to the actual display, the Allen-Bradley 2711-M3A18L1 comes with a 3-inch monochrome screen. The display supports a resolution of 128 x 64 pixels. The display area on this micro operator terminal is 73 x 42 millimeters (2.87 x 1.67 inches). The internal backlight on this micro operator terminal comes with a lifespan of 100,000 hours. Multiple essential buttons make up the keypad assembly. Users will find all the required navigation, numeric, and function keys on the built-in keypad. The 2711-M3A18L1 also features an internal real-time clock. The clock is used to timestamp critical industrial processing data. Due to the small display size, the Allen-Bradley 2711-M3A18L1 is ideal for use with small industrial machines and other simple operations. The 8-pin mini-DIN RS-232 interface is compatible with DF1. The built-in 170 kilobytes memory is used for application runtime, and the 240 kilobytes memory is used as the terminal’s non-volatile memory.