GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - HMI |
Product Type: | HMI / Operator Interface |
Part Number: | 2711P-RGT15 |
Series: | 2711P |
Description:
The 2711P-RGT15 from Allen-Bradley is an antiglare overlay that is compatible with the Panelview plus and Panelview plus 1500 terminals. If used outside, UV radiation from the sun discolors or yellows all polymers in the Panel View Plus and Panel View 1500 terminals, causing them to turn brittle gradually. The 2711PRGT15 may protect terminal front panels from direct UV radiation exposure, hence extending their life. A removable protective coat is located on the adhesive side of this overlay.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 2711P-RGT15 is an antiglare overlay for the Panel View Plus and Panel View Plus CE touch 1500 terminals. When used outdoors, the sun's ultraviolet rays cause discoloration or yellowing of all plastics in the Panel View Plus and Panel View CE touch 1500 terminals, and in turn, they become brittle over time. By using an antiglare coating, specifically, the 2711PRGT15 users can protect the front panels of terminals from direct exposure to UV rays and increase their lifespan. A removable protective layer is featured with this antiglare overlay on its adhesive side. To remove this protective layer, users need to slightly pull back on the tab.
Furthermore, the upper layer's adherence is affected by grease. Therefore, before installation, grease, fingerprints, streaks, and lint needs to be removed from the terminal screen using a Windex glass cleaner. Hold the tab and peel back the protective layer covering the overlay's adhesive surface on one of the short sides to attach the overlay. The markings included in this overlay should not be removed. As you work on the following stage, keep the peeled back piece of the protective coating away. Place the antiglare overlay in the middle of the terminals' surface and gently place the revealed adhesive area. Gradually peel away the remainder of the protective coating, pressing the antiglare overlay onto the display with a clean cloth. Ensure that there are no distortions or bubbles in the overlay. Squeeze all around the borders of the overlay with just a clean cloth. The flat surface of fingernails can also be used to thoroughly seal it and eliminate any air bubbles caught in the adhesive.
Question: Does Automation Stop offer repairs on the 2711P-RGT15?
Answer: Yes. We offer repairs for the 2711P-RGT15 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-RGT15?
Answer: If you buy the 2711P-RGT15 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2711P-RGT15 online?
Answer: Yes. Automation Stop sells the 2711P-RGT15 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2711P-RGT15?
Answer: The 2711P-RGT15 is made by Allen Bradley - HMI.
For additional information about 2711P-RGT15 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-RGT15.
Revision Part # | Also Known As | Availability |
---|---|---|
2711P-RGT15/A | 2711P-RGT15 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.