The 2711P-T10C4A9 is a PanelView Terminal manufactured by Allen-Bradley/Rockwell Automation as part of the PanelView Plus 6 product line. It comes with comprehensive features and file viewers, and it is designed to graphically display the application status information, thus enabling the user to monitor and control their machine without any glitches. This module comes with a flexible configuration, a separate logic module, a display module, and an optional communication module. Its operator interface can be controlled through a touchscreen that is designed for input of data and information. It has a 10.4-inch color display and a resistive touchscreen as the primary input option. The display features a resolution of 640 x 480 pixels, with a graphics color of 18-bit. Other specifications of this terminal include a nonvolatile RAM of 512 megabytes for user storage, and it also has an approximated weight of 8 pounds and measurements of 16 x 14 x 8 inches.
Allen-Bradley 2711P-T10C4A9 PanelView 6 terminal operates on an input voltage of 100 – 240 volts AC at a frequency of 50 – 60 hertz and maximum power consumption of 160 volt-amps. This device uses RS-232 port, 2 USB ports, and Ethernet port for communication purposes. Allen-Bradley 2711P-T10C4A9 terminal supports an optional ControlNet, DH-485, Ethernet, and DH+ modules. Besides, it features a battery-backed real-time clock with support for an external SD card for storage.

Part number 2711P-T10C4A9 is a PanelView Plus 6 1000 series terminal that was designed and manufactured by the company known as Allen-Bradley. It features 18-bit color graphics in a 10.4 inch display capable of showing color and it has a 640 x 480 resolution. By increasing the processor's speed, this product has been improved and enhanced when compared to previous models of the same product line family. The result of this enhancement is an operator interface that is not only fast, but also relaiable, and it has a touch screen input, which is one of the 3 main parts. These three (3) parts include the display module, the input touch module, and the logic module. This unit has numerous ways to communicate with other devices.  This communication can be done using the embedded Ethernet port, RS-232 port, and 2 USB ports. Usually, the RS-232 port is used to connect a computer, or PC, or even a handheld terminal for programming purposes. Additionally, the RS-232 port can be used to describe points in the terminal memory to be used later by the PLC program. The internal memory available to the user is 512 megabytes of RAM, as well as 512 megabytes of nonvolatile flash memory, with approximately 79 megabytes of the nonvolatile flash memory used for free user memory. The terminal should be kept in an area where the temperature remains within the range of 32 to 131 degrees Fahrenheit during operation and -13 to 158 degrees Fahrenheit when it is non-operational.