GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - HMI |
Product Type: | HMI / Operator Interface |
Part Number: | 2711P-T10C4D1 |
Series: | PV Plus 1000 |
UPC: | 10662073072079 |
Description:
Part number 2711P-T10C4D1 is an operator terminal that belongs to the PanelView Plus 1000 series of operator terminals manufactured by Allen Bradley. This terminal is powered via an external power supply with a voltage range of 18 to 32 volts DC. It is equipped with a touch screen interface that is primarily used for operator input. This screen has a display size of 10.4 inches. This operator terminal has physical dimensions that measure 248 mm x 329 mm x 55 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2711P-T10C4D1 is a PanelView Plus 1000 operator terminal manufactured by Allen Bradley as part of the PanelView 1000 series. This module is an obsolete operator terminal designed to allow the user to interact with their machines. The 2711P-T10C4D1 operator terminal lets the user observe, manipulate, and graphically display information, thus enabling the operators to understand their application status quickly. The PanelView Plus terminal is programmed using the RSView Studio Machine Edition. Besides, it has a 10.4-inch color display screen, and the operator can control the terminal by the Touchscreen for the input of information and data. Allen Bradley 2711P-T10C4D1 operator terminal is powered by a power voltage of 18 – 32 volts DC. Other features include EtherNet/IP (Ethernet Industrial Protocol), which is an open industrial network that supports real-time message exchange and I/O messaging. The Ethernet communication port connects the terminal to a controller over EtherNet/IP network with the help of the network and standard Ethernet connections. The Ethernet port is compatible and works with application transfers and printing. The EtherNet/IP screen allows the operator to make changes of some EtherNet/IP communication settings for PanelView terminal like the 2711P-T10C4D1.
The 2711P-T10C4D1 operator terminal, which was manufactured by Allen-Bradley, is a member of the PanelView Plus 1000 series of products. This is a device that enables the management and surveillance of new machinery in a manufacturing setting while they are running in real-time. Changes may be made to the logic and data stored in a memory of partner automation systems, including PLCs, configurable automated controllers, gateways, stand-alone controllers, and other third-party devices, via the interchange of data. Using graphical interfaces that reflect the process, an operator may manage and monitor processes in a more user-friendly manner than previously possible.
It is possible to exchange data using either the RS-232 port or the Ethernet interface. Because these communication interfaces are discrete, they may be used alone or in conjunction with one another. This device can also be used to interact with a wide range of other devices, in addition to itself. The analog resistive touchscreen interface has an estimated lifespan of up to one million (1,000,000) actuations with an actuation force of 10 to 110 g. Multiple vendor interfaces, expressions, and trends are among the key characteristics of this system. This operator terminal should be operated within an area that has a temperature that ranges from 0 to 55 degrees Celsius, or the equivalent range of 32 to 131 degrees Fahrenheit. Additionally, when this terminal is not operational and is being stored, the temperature of the surrounding area should range from -25 to 70 degrees Celsius, or the equivalent range of -13 to 158 degrees Fahrenheit.
MPN | 2711P-T10C4D1 |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | Panelview Plus 1000 |
Input Type | Touch |
Display Type | Color |
Display Size | 10.4 in |
Resolution | 640 x 480 |
Power | DC |
PCI Max | 11 W |
Battery Life | 4 years min. at 25 °C (77 °F) |
Clock | Battery-backed, +/-2 minutes per month |
Operating Temperature | 0...55 °C (32...131 °F) |
Heat Dissipation | 240 BTU/hr |
Backlight | CCFL 50,000 hours life, min. |
Communication | Ethernet, RS-232 & (2) USB |
Logic Module | 64 MB |
External CompactFlash Storage | 512 MB max |
Input Voltage | - |
Question: Does Automation Stop offer repairs on the 2711P-T10C4D1?
Answer: Yes. We offer repairs for the 2711P-T10C4D1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-T10C4D1?
Answer: If you buy the 2711P-T10C4D1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2711P-T10C4D1 online?
Answer: Yes. Automation Stop sells the 2711P-T10C4D1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2711P-T10C4D1?
Answer: The 2711P-T10C4D1 is made by Allen Bradley - HMI.
Question: What type of product is the 2711P-T10C4D1?
Answer: The 2711P-T10C4D1 is part of the PV Plus 1000 series.
Question: What is the Backlight of the 2711P-T10C4D1?
Answer: The Backlight of the Allen Bradley Automation 2711P-T10C4D1 is CCFL 50,000 hours life, min..
Question: What is the Battery Life of the Allen-Bradley 2711P-T10C4D1?
Answer: The Battery Life of the Allen-Bradley 2711P-T10C4D1 is 4 years min. at 25 °C (77 °F).
Question: What Clock does the Allen Bradley 2711P-T10C4D1 have?
Answer: The 2711P-T10C4D1 has a Clock of Battery-backed, +/-2 minutes per month.
Question: What is the Communication of the 2711P-T10C4D1?
Answer: The 2711P-T10C4D1 has a Communication of Ethernet, RS-232 & (2) USB.
Question: What is the Display Size of the 2711P-T10C4D1?
Answer: The 2711P-T10C4D1 has a Display Size of 10.4 in.
Question: What Display Type does the 2711P-T10C4D1 have?
Answer: The Allen Bradley-Rockwell Automation 2711P-T10C4D1 has a color-supporting Display Type.
Question: What External CompactFlash Storage does the Allen Bradley-Rockwell Automation 2711P-T10C4D1 have?
Answer: The 2711P-T10C4D1 has a External CompactFlash Storage of 512 MB max.
Question: What Heat Dissipation does the 2711P-T10C4D1 have?
Answer: The Heat Dissipation of the Allen Bradley 2711P-T10C4D1 is 240 BTU/hr.
Question: What Input Type is included with the Allen Bradley-Rockwell Automation 2711P-T10C4D1?
Answer: The 2711P-T10C4D1 has a Touch Input Type.
Question: What Input Voltage is included with the Allen Bradley-Rockwell Automation 2711P-T10C4D1?
Answer: The Allen Bradley-Rockwell Automation 2711P-T10C4D1 has a - Input Voltage.
Question: What is the Logic Module of the 2711P-T10C4D1?
Answer: The 2711P-T10C4D1 has a Logic Module of 64 MB.
Question: What Operating Temperature does the 2711P-T10C4D1 have?
Answer: The Allen Bradley Automation 2711P-T10C4D1 has a Operating Temperature of 0...55 °C (32...131 °F).
Question: What is the PCI Max of the Rockwell Automation 2711P-T10C4D1?
Answer: The 2711P-T10C4D1 has a PCI Max of 11 W.
Question: What Power is included with the 2711P-T10C4D1?
Answer: The 2711P-T10C4D1 has a direct current Power.
Question: What is the Resolution of the Allen Bradley/Rockwell Automation 2711P-T10C4D1?
Answer: The Resolution of the 2711P-T10C4D1 is 640 x 480.
For additional information about 2711P-T10C4D1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-T10C4D1.
Revision Part # | Also Known As | Availability |
---|---|---|
2711P-T10C4D1/A | 2711P-T10C4D1 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.