The Allen-Bradley 2711P-T10C4D8 PanelView Plus 6 graphic color terminal provides a 10.4 inches active-matrix thin-film transistor (TFT) with a liquid crystal (LCD) display which has a resolution of 640 x 480 pixels. This PanelView Plus color terminal operates with the touch screen. The Allen-Bradley 2711P-T10C4D8 terminal contains two USB ports which can support keyboards, mouse devices (HID devices) and USB printers, integral RS-232 serial electrical isolated port for uploading/downloading applications and printing and an Ethernet electrical isolated communication port. The Allen-Bradley 2711P-T10C4D8 terminal includes 512 megabytes random access memory (RAM) for runtime applications and 512 megabytes nonvolatile flash memory. The Allen-Bradley 2711P-T10C4D8 supports a memory Type I CompactFlash cards to save and store applications.

This 2711P-T10C4D8 PanelView Plus 6- 1000 model terminal provides modular components configuration which includes a display module with a touch screen, a logic module, ControlNet and DH+ /DH-485 communication modules. This color terminal uses 2711-NC14, 2711-NC13 and 1585J-M type cables to communication with PLC-5, SLC and MicroLogix controllers. The Allen-Bradley 2711P-T10C4D8 color touch screen terminal supports an input voltage rating range of 18 to 32 volts DC with a maximum power consumption of 70 watts. The 2711P-T10C4D8 terminal is designed to meet the NEMA Type and IEC enclosure ratings. The Allen-Bradley 2711P-T10C4D8 should be installed in panels or enclosure using mounting clips to preserve the internal circuitry. This PanelView terminal can operate at a temperature range of 0 degrees to 55 degrees Celsius (32 degrees to 131 degrees Fahrenheit) for indoor and outdoor applications and weighs approximately 2.6 kilograms (5.7 pounds) while shipping.

The 2711P-T10C4D8, which was designed and produced by the Allen-Bradley company, is a PanelView Plus 6 operator terminal. This Allen-Bradley unit is equipped with a 10.4 inch (when measured diagonally) touch screen that has a 640 x 480 pixel resolution. Not only that, but the 2711P-T10C4D8 has 18-bit color graphics. The 2711P-T10C4D8 requires a 24 volt DC (direct current) input to operate. By increasing this unit's processor speed, Allen-Bradley was able to improve this device compared to previous iterations because it resulted in an operator interface that was fast and reliable. The display module, input touch module, and logic module are the three (3) most important parts when it comes to this product. These three parts are generally organized to be able to do multiple things, such as upgrading, migration or being able to be interchanged with a different unit. However, it is uncommon that the complete terminal must be changed. Embedded within this Allen-Bradley device is one (1) Ethernet port, one (1) RS-232 port, and two (2) USB ports that are used primarily for communication. The RS-232 port is a serial interface and is usually used for programming purposes with handheld terminal or with laptop. The other two ports are used for network connection. When connected to a network, this product is capable of being connected to other device. External devices, printers, keyboards, etc. are all examples of devices that this product can be connected to. When this terminal is not being used, it is important to keep the surrounding temperature within the range of negative thirteen (-13) to one hundred and fifty-eight (158) degrees Fahrenheit.