GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - HMI |
Product Type: | HMI / Operator Interface |
Part Number: | 2711P-T6C20D9 |
Series: | Panelview Plus 6 |
UPC: | 884951344174 |
Description:
Allen-Bradley?s 2711P-T6C20D9 is a 5.7-inch operator interface terminal that comes with a non-replaceable built-in backlight. This operator terminal belongs to the PanelView Plus 6 - 600 series of operator interface terminals. For communication purposes, this device is equipped with an Ethernet port, as well as an RS-232 port. It has power supplied by a DC power source of 18 to 30 volts DC supply. 512 megabytes of non-volatile memory and 256 megabytes of random-access memory (RAM) are available with this module.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part Number 2711P-T6C20D9 is a PanelView Plus 6 - 600 graphic operator interface terminal that was manufactured by Allen-Bradley / Rockwell Automation. This graphic operator terminal comes with a color display of size 5.7 inches. A pre-installed backlight is present in this module that cannot be replaced. The user can interact with the machine through this human interface (HMI) module. The user can provide input data and information to this operator terminal via its built-in touchscreen. This 5.7-inch terminal comes with an RS-232 and an Ethernet communication port. The Ethernet port shows great functionality for printing and application transfers when linked to the Ethernet / IP network. This terminal also facilitates other functions through its Ethernet / IP network connection, such as accessing and configuring the communication settings, message exchange, and real-time Input / Output messaging.
Allen-Bradley’s 2711P-T6C20D9 module has an integrated backlight. This graphic module enables the user to connect the communications ports of Ethernet and RS-232 via communication cables of part number 2711-NC13. If another communication module is required with this terminal, the user can use an Ethernet communication module of part number 2711P-RN20. This communication module has a unique IP address. The technical features for this operator module include a voltage power supply range of eighteen (18) to thirty (30) volts direct current (DC), five hundred and twelve (512) megabytes (MB) of non-volatile memory, two hundred and fifty-six (256) megabytes of RAM (random access memory), a weight of approximately six (6) pounds, and physical dimensions that measure 14 x 11 x 8 inches.
MPN | 2711P-T6C20D9 |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | PanelView 6 Plus Terminal |
Input Type | Touch |
Display Size | 5.7 in |
Display Type | Color |
Power | DC |
Question: Does Automation Stop offer repairs on the 2711P-T6C20D9?
Answer: Yes. We offer repairs for the 2711P-T6C20D9 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-T6C20D9?
Answer: If you buy the 2711P-T6C20D9 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2711P-T6C20D9 online?
Answer: Yes. Automation Stop sells the 2711P-T6C20D9 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2711P-T6C20D9?
Answer: The 2711P-T6C20D9 is made by Allen Bradley - HMI.
Question: What type of product is the 2711P-T6C20D9?
Answer: The 2711P-T6C20D9 is part of the Panelview Plus 6 series.
Question: What is the Display Size of the 2711P-T6C20D9?
Answer: The Rockwell-Automation 2711P-T6C20D9 has a Display Size of 5.7 in.
Question: What Display Type does the Allen Bradley Automation 2711P-T6C20D9 have?
Answer: The 2711P-T6C20D9 has a colored Display Type.
Question: What Input Type does the 2711P-T6C20D9 have?
Answer: The Allen Bradley Automation 2711P-T6C20D9 has a Touch Input Type.
Question: What Power does the 2711P-T6C20D9 have?
Answer: The Allen Bradley/Rockwell Automation 2711P-T6C20D9 has a DC Power.
For additional information about 2711P-T6C20D9 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-T6C20D9.
Revision Part # | Also Known As | Availability |
---|---|---|
2711P-T6C20D9/A | 2711P-T6C20D9 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.