GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1326AB-B515G-21-K5

✓ In Stock

Manufacturer: Allen Bradley - Motors
Product Type: Drive
Part Number: 1326AB-B515G-21-K5
Series: 1326 Motors

Description:

Part number 1326AB-B515G-21-K5 is a motor that was designed and manufactured by Allen Bradley. The operating frequency of this motor ranges from 50 to 60 hertz, while the operating voltages ranges from 380 to 460 volts. The rated speed of this device is 4000 rpm at 380 volts, as well as 5000 rpm at 460 volts. This device has a rated ambient temperature of 40 �C, or 104 �F. This motor is equipped with built-in brakes that have 24-volt DC voltage.


Key Features:

  • operates at a voltage of 460/380v ac
  • is discontinued/obsolete

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$2,366.00

Available: 10

What is Refurbished

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 1326AB-B515G-21-K5 is a servo motor that was manufactured by Allen Bradley. These RoHs compliant motors are used frequently with Allen Bradley systems. These motors have a 149 mm frame size and operate at a frequency of 50 to 60 hertz. With a voltage rating of 380 to 460 V, these motors give a remarkable performance. These motors follow all electrical standards. The speed is 5000 rpm for 460 V and 4000 rpm for 380 V. Part number 1326AB-B515G-21-K5 is equipped with an IEC metric flange that has a keyway. The rated output is 2.9 kW and the rated torque is 13.6 N-m (Newton-meters). There are built in brakes in this model that have 24-volt DC coil. This servo motor has different built-in features that enhance the performance. This includes the UL insulation, aluminum housing, permanent flux magnets, continuous rated output torque, metric flange mount, TENV construction, and threaded holes for couplings. Due to these features, this motor can be found being utilized in various industries. The peak stall torque for this system is 31.2 N-m. The ambient temperature rating for this device is 40 °C, or the equivalent of 104 °F. There is an integral holding brake that is spring set when power is removed. At an emergency stop, there is limited braking torque for holding load at haul. It is important to note that users should not continuously cycle the break for the stopping load, nor should braking torque be used for this purpose. This should all be kept in mind to avoid damage. Proper installation protocol should be followed during the installation process.

Technical Specifications

Manufacturer Allen Bradley
Series 460V Torque Plus Series
Product Type Ferrite AC Servo Motor
Frame Series 149 mm frame diameter (165 mm bolt center)
Motor magnet stack length 15mm
Rated Speed 460V 5000 rpm/380V 4000 rpm
Flange and Shaft Series IEC Metric Flange with keyway
Standard Options 13.6 N-m (120 lb-in.) Holding brake with 24V DC coil for 1326AB-B5 frame series
MPN 1326AB-B515G-21-K5
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1326AB-B515G-21-K5?

Answer: Yes. We offer repairs for the 1326AB-B515G-21-K5 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and 1326AB-B515G-21-K5?

Answer: If you buy the 1326AB-B515G-21-K5 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1326AB-B515G-21-K5 online?

Answer: Yes. Automation Stop sells the 1326AB-B515G-21-K5 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1326AB-B515G-21-K5?

Answer: The 1326AB-B515G-21-K5 is made by Allen Bradley - Motors.


Question: What type of product is the 1326AB-B515G-21-K5?

Answer: The 1326AB-B515G-21-K5 is part of the 1326 Motors series.


Question: What kind of Flange and Shaft Series does the 1326AB-B515G-21-K5 have?

Answer: The Rockwell-Automation 1326AB-B515G-21-K5 includes IEC Metric Flange with keyway for its Flange and Shaft Series.


Question: What is the Frame Series of the 1326AB-B515G-21-K5?

Answer: The Allen-Bradley 1326AB-B515G-21-K5 has a Frame Series of 149 mm frame diameter (165 mm bolt center).


Question: What Motor magnet stack length does the 1326AB-B515G-21-K5 have?

Answer: The Motor magnet stack length of the 1326AB-B515G-21-K5 is 15mm.


Question: What Product Type does the Rockwell-Automation 1326AB-B515G-21-K5 have?

Answer: The Rockwell-Automation 1326AB-B515G-21-K5 has a Ferrite AC (alternating current) Servo Motor Product Type.


Question: What is the Rated Speed of the 1326AB-B515G-21-K5?

Answer: The Rated Speed of the 1326AB-B515G-21-K5 is 460 volts 5000 revolutions per minute (RPM)/460 volts 4000 revolutions per minute (RPM).


Question: What Standard Options does the Allen-Bradley 1326AB-B515G-21-K5 have?

Answer: The Standard Options of the 1326AB-B515G-21-K5 is 13.6 N-m (120 lb-in.) Holding brake with 24 volts DC (direct current) coil for 1326AB-B5 frame series.


Series information for 1326AB-B515G-21-K5

For additional information about 1326AB-B515G-21-K5 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1326AB-B515G-21-K5.

Revision Part # Also Known As Availability
1326AB-B515G-21-K5/A 1326AB-B515G-21-K5 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1326AB-B515G-21-KS
  • 1326AB-B515G-2I-K5
  • 1326AB-B515G-2I-KS
  • 1326AB-B5156-21-K5
  • 1326AB-B5156-21-KS
  • 1326AB-B5156-2I-K5
  • 1326AB-B5156-2I-KS
  • 1326AB-B51SG-21-K5
  • 1326AB-B51SG-21-KS
  • 1326AB-B51SG-2I-K5
  • 1326AB-B51SG-2I-KS
  • 1326AB-B51S6-21-K5
  • 1326AB-B51S6-21-KS
  • 1326AB-B51S6-2I-K5
  • 1326AB-B51S6-2I-KS
  • 1326AB-B5I5G-21-K5
  • 1326AB-B5I5G-21-KS
  • 1326AB-B5I5G-2I-K5
  • 1326AB-B5I5G-2I-KS
  • 1326AB-B5I56-21-K5
  • 1326AB-B5I56-21-KS
  • 1326AB-B5I56-2I-K5
  • 1326AB-B5I56-2I-KS
  • 1326AB-B5ISG-21-K5
  • 1326AB-B5ISG-21-KS
  • 1326AB-B5ISG-2I-K5
  • 1326AB-B5ISG-2I-KS
  • 1326AB-B5IS6-21-K5
  • 1326AB-B5IS6-21-KS
  • 1326AB-B5IS6-2I-K5
  • 1326AB-B5IS6-2I-KS
  • 1326AB-BS15G-21-K5
  • 1326AB-BS15G-21-KS
  • 1326AB-BS15G-2I-K5
  • 1326AB-BS15G-2I-KS
  • 1326AB-BS156-21-K5
  • 1326AB-BS156-21-KS
  • 1326AB-BS156-2I-K5
  • 1326AB-BS156-2I-KS
  • 1326AB-BS1SG-21-K5
  • 1326AB-BS1SG-21-KS
  • 1326AB-BS1SG-2I-K5
  • 1326AB-BS1SG-2I-KS
  • 1326AB-BS1S6-21-K5
  • 1326AB-BS1S6-21-KS
  • 1326AB-BS1S6-2I-K5
  • 1326AB-BS1S6-2I-KS
  • 1326AB-BSI5G-21-K5
  • 1326AB-BSI5G-21-KS
  • 1326AB-BSI5G-2I-K5
  • 1326AB-BSI5G-2I-KS
  • 1326AB-BSI56-21-K5
  • 1326AB-BSI56-21-KS
  • 1326AB-BSI56-2I-K5
  • 1326AB-BSI56-2I-KS
  • 1326AB-BSISG-21-K5
  • 1326AB-BSISG-21-KS
  • 1326AB-BSISG-2I-K5
  • 1326AB-BSISG-2I-KS
  • 1326AB-BSIS6-21-K5
  • 1326AB-BSIS6-21-KS
  • 1326AB-BSIS6-2I-K5
  • 1326AB-BSIS6-2I-KS
  • 1326AB-8515G-21-K5
  • 1326AB-8515G-21-KS
  • 1326AB-8515G-2I-K5
  • 1326AB-8515G-2I-KS
  • 1326AB-85156-21-K5
  • 1326AB-85156-21-KS
  • 1326AB-85156-2I-K5
  • 1326AB-85156-2I-KS
  • 1326AB-851SG-21-K5
  • 1326AB-851SG-21-KS
  • 1326AB-851SG-2I-K5
  • 1326AB-851SG-2I-KS
  • 1326AB-851S6-21-K5
  • 1326AB-851S6-21-KS
  • 1326AB-851S6-2I-K5
  • 1326AB-851S6-2I-KS
  • 1326AB-85I5G-21-K5
  • 1326AB-85I5G-21-KS
  • 1326AB-85I5G-2I-K5
  • 1326AB-85I5G-2I-KS
  • 1326AB-85I56-21-K5
  • 1326AB-85I56-21-KS
  • 1326AB-85I56-2I-K5
  • 1326AB-85I56-2I-KS
  • 1326AB-85ISG-21-K5
  • 1326AB-85ISG-21-KS
  • 1326AB-85ISG-2I-K5
  • 1326AB-85ISG-2I-KS
  • 1326AB-85IS6-21-K5
  • 1326AB-85IS6-21-KS
  • 1326AB-85IS6-2I-K5
  • 1326AB-85IS6-2I-KS
  • 1326AB-8S15G-21-K5
  • 1326AB-8S15G-21-KS
  • 1326AB-8S15G-2I-K5
  • 1326AB-8S15G-2I-KS
  • 1326AB-8S156-21-K5

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP