GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1326AS-B440G-21

Manufacturer: Allen Bradley - Motors
Product Type: Drive
Part Number: 1326AS-B440G-21
Series: 1326 Motors

Description:

The Allen-Bradley 1326AS-B440G-21 are servo motors which provide high acceleration, low inertia and high peak torque. The peak stall torque of this device is nineteen (19) Nm. This product also has an output power of two (2) kW. The continuous stall torque is 6.4 Nm. This device has a maximum speed of 5250 revolutions per minute, or rpm, at 480 volts. The rotor inertia for this product comes in at around 0.0005 kg-m²;.


Key Features:

  • operates at a voltage of 460v ac
  • comes discontinued/obsolete

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$2,176.00

Available: 6

What is Refurbished

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1326AS-B440G-21 is one of the renowned servo motors produced by Allen-Bradley. It provides high acceleration, low inertia and high peak torque. It comes with the storage and ambient temperature of about negative twenty-two (-22) to one hundred and fifty-eight (158) ℉ and thirty-two (32) to one hundred and four (104) ℉ respectively with a non-condensing relative humidity range of five percent (5%) to ninety-five percent (95%). This Allen-Bradley 1326AS-B440G-21 servo motor can tolerate up to twenty (20) g shock and vibration up to 2.5g at a frequency of five (5) to two thousand (2000) hertz. This Allen-Bradley servo motor has an approximate weight of 25.79 lbs. This device's peak stall torque is nineteen (19) Nm, or one hundred and sixty-eight (168) pounds to an inch (lb-in.) The output power of this device is two (2) kW. 6.4Nm, or 56.0 lb-in., is this device's continuous stall torque. The maximum speed that this device can achieve is 5250 revolutions per minute, or rpm. This servo motor has a rotor inertia of 0.0005 kg-m². This motor has reliable brakes with 0.44-degree brake backlash, 0.69 A current at twenty-four (24) volts direct current, or DC, in coil, 10.2 Nm holding torque and 44/13 brake response time. The Allen-Bradley 1326AS-B440G-21 servo motor is made with rare-earth magnets (Neodymium-iron-boron). The frame size of the rotor is approximately one hundred (100) mm. The magnetic stack length of this device is four (4) inches. This motor is primarily used within the applications of CNC machine, robotics, and material handling, etc.

Technical Specifications

Manufacturer Allen Bradley
Series 1326AS Series Low Inertia Brushless Servo Motors
Product Type Low Inertia Brushless Servo Motor
Voltage 460V AC
Frame Series (Approximate stator size) 100mm
Motor Length (magnet stack length) 40
Rated Speed 460V 5250 rpm
Rated Speed 380V 4340 rpm
Motor Rated Torque 64 N-m (56 lb-in.)
Motor Rated Output 2.0 KW
Rotor Inertia 0.0005 kg-m^2 (0.0046 lb-in.-s^2)
System Continuous Torque 6.4 N-m (56 lb-in.) AM07, AM50 / 5.3 N-m (47 lb-in.) AM04
System Peak Stall Torque 19 N-m (168 lb-in.) AM50 / 17.6 N-m (156 lb-in.) AM07 / 10.5 N-m (93 lb-in.) AM04 /
System Continuous Stall Current 5.4 A AM07, AM50 / 4.5 A AM04
System Peak Stall Current 16.2 A AM50 / 15.0 A AM07 / 9.0 A AM04
1394 Axis Module AM04, AM07, AM50
Flange and Shaft Series IEC metric flange with keyway
MPN 1326AS-B440G-21
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1326AS-B440G-21?

Answer: Yes. We offer repairs for the 1326AS-B440G-21 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and 1326AS-B440G-21?

Answer: If you buy the 1326AS-B440G-21 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1326AS-B440G-21 online?

Answer: Yes. Automation Stop sells the 1326AS-B440G-21 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1326AS-B440G-21?

Answer: The 1326AS-B440G-21 is made by Allen Bradley - Motors.


Question: What type of product is the 1326AS-B440G-21?

Answer: The 1326AS-B440G-21 is part of the 1326 Motors series.


Question: What 1394 Axis Module does the Allen Bradley 1326AS-B440G-21 have?

Answer: The Allen Bradley 1326AS-B440G-21 has a 1394 Axis Module of AM04, AM07, AM50.


Question: What kind of Flange and Shaft Series does the 1326AS-B440G-21 have?

Answer: The 1326AS-B440G-21 includes IEC metric flange with keyway for its Flange and Shaft Series.


Question: What is the Frame Series (Approximate stator size) of the 1326AS-B440G-21?

Answer: The Frame Series (Approximate stator size) of the 1326AS-B440G-21 is 100mm.


Question: What is the Motor Length (magnet stack length) of the 1326AS-B440G-21?

Answer: The 1326AS-B440G-21 has a Motor Length (magnet stack length) of 40.


Question: What is the Motor Rated Output of the 1326AS-B440G-21?

Answer: The Rockwell Automation 1326AS-B440G-21 has a Motor Rated Output of 2.0 KW.


Question: What Motor Rated Torque does the 1326AS-B440G-21 have?

Answer: The Motor Rated Torque of the 1326AS-B440G-21 is 64 N-m (56 lb-in.).


Question: What Product Type does the Allen Bradley-Rockwell Automation 1326AS-B440G-21 have?

Answer: The Allen Bradley-Rockwell Automation 1326AS-B440G-21 has a Low Inertia Brushless Servo Motor Product Type.


Question: What is the Rated Speed 380V of the Allen Bradley/Rockwell Automation 1326AS-B440G-21?

Answer: The Rated Speed 380V of the 1326AS-B440G-21 is 4340 revolutions per minute (RPM).


Question: What is the Rated Speed 460V of the 1326AS-B440G-21?

Answer: The Rockwell Automation 1326AS-B440G-21 has a Rated Speed 460V of 5250 revolutions per minute (RPM).


Question: What Rotor Inertia does the 1326AS-B440G-21 have?

Answer: The 1326AS-B440G-21 has a Rotor Inertia of 0.0005 kg-m^2 (0.0046 lb-in.-s^2).


Question: What is the System Continuous Stall Current of the Allen Bradley/Rockwell Automation 1326AS-B440G-21?

Answer: The System Continuous Stall Current of the Allen Bradley/Rockwell Automation 1326AS-B440G-21 is 5.4 A AM07, AM50 / 4.5 A AM04.


Question: What System Continuous Torque does the 1326AS-B440G-21 have?

Answer: The System Continuous Torque of the 1326AS-B440G-21 is 6.4 N-m (56 lb-in.) AM07, AM50 / 5.3 N-m (47 lb-in.) AM04.


Question: What is the System Peak Stall Current of the 1326AS-B440G-21?

Answer: The System Peak Stall Current of the Allen Bradley 1326AS-B440G-21 is 16.2 A AM50 / 15.0 A AM07 / 9.0 A AM04.


Question: What is the System Peak Stall Torque of the 1326AS-B440G-21?

Answer: The System Peak Stall Torque of the 1326AS-B440G-21 is 19 N-m (168 lb-in.) AM50 / 17.6 N-m (156 lb-in.) AM07 / 10.5 N-m (93 lb-in.) AM04 / .


Question: What is the Voltage of the 1326AS-B440G-21?

Answer: The 1326AS-B440G-21 has a Voltage of 460 volts alternating current (AC).


Series information for 1326AS-B440G-21

For additional information about 1326AS-B440G-21 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1326AS-B440G-21.

Revision Part # Also Known As Availability
1326AS-B440G-21/A 1326AS-B440G-21 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1326AS-B440G-2I
  • 1326AS-B4406-21
  • 1326AS-B4406-2I
  • 1326AS-B44OG-21
  • 1326AS-B44OG-2I
  • 1326AS-B44O6-21
  • 1326AS-B44O6-2I
  • 1326AS-8440G-21
  • 1326AS-8440G-2I
  • 1326AS-84406-21
  • 1326AS-84406-2I
  • 1326AS-844OG-21
  • 1326AS-844OG-2I
  • 1326AS-844O6-21
  • 1326AS-844O6-2I
  • 1326A5-B440G-21
  • 1326A5-B440G-2I
  • 1326A5-B4406-21
  • 1326A5-B4406-2I
  • 1326A5-B44OG-21
  • 1326A5-B44OG-2I
  • 1326A5-B44O6-21
  • 1326A5-B44O6-2I
  • 1326A5-8440G-21
  • 1326A5-8440G-2I
  • 1326A5-84406-21
  • 1326A5-84406-2I
  • 1326A5-844OG-21
  • 1326A5-844OG-2I
  • 1326A5-844O6-21
  • 1326A5-844O6-2I
  • 132GAS-B440G-21
  • 132GAS-B440G-2I
  • 132GAS-B4406-21
  • 132GAS-B4406-2I
  • 132GAS-B44OG-21
  • 132GAS-B44OG-2I
  • 132GAS-B44O6-21
  • 132GAS-B44O6-2I
  • 132GAS-8440G-21
  • 132GAS-8440G-2I
  • 132GAS-84406-21
  • 132GAS-84406-2I
  • 132GAS-844OG-21
  • 132GAS-844OG-2I
  • 132GAS-844O6-21
  • 132GAS-844O6-2I
  • 132GA5-B440G-21
  • 132GA5-B440G-2I
  • 132GA5-B4406-21
  • 132GA5-B4406-2I
  • 132GA5-B44OG-21
  • 132GA5-B44OG-2I
  • 132GA5-B44O6-21
  • 132GA5-B44O6-2I
  • 132GA5-8440G-21
  • 132GA5-8440G-2I
  • 132GA5-84406-21
  • 132GA5-84406-2I
  • 132GA5-844OG-21
  • 132GA5-844OG-2I
  • 132GA5-844O6-21
  • 132GA5-844O6-2I
  • I326AS-B440G-21
  • I326AS-B440G-2I
  • I326AS-B4406-21
  • I326AS-B4406-2I
  • I326AS-B44OG-21
  • I326AS-B44OG-2I
  • I326AS-B44O6-21
  • I326AS-B44O6-2I
  • I326AS-8440G-21
  • I326AS-8440G-2I
  • I326AS-84406-21
  • I326AS-84406-2I
  • I326AS-844OG-21
  • I326AS-844OG-2I
  • I326AS-844O6-21
  • I326AS-844O6-2I
  • I326A5-B440G-21
  • I326A5-B440G-2I
  • I326A5-B4406-21
  • I326A5-B4406-2I
  • I326A5-B44OG-21
  • I326A5-B44OG-2I
  • I326A5-B44O6-21
  • I326A5-B44O6-2I
  • I326A5-8440G-21
  • I326A5-8440G-2I
  • I326A5-84406-21
  • I326A5-84406-2I
  • I326A5-844OG-21
  • I326A5-844OG-2I
  • I326A5-844O6-21
  • I326A5-844O6-2I
  • I32GAS-B440G-21
  • I32GAS-B440G-2I
  • I32GAS-B4406-21
  • I32GAS-B4406-2I
  • I32GAS-B44OG-21

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP