GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

MPF-A320P-MJ74BA

Manufacturer: Allen Bradley - Motors
Product Type: Servo Motor
Part Number: MPF-A320P-MJ74BA
Series: MPF

Description:

This Allen-Bradley/Rockwell Automation Premium Permanent Magnet Food Grade Motor Low-Inertia Servo Motor comes with a frame size of 100 mm. This component has rated speed of 5000 rpm. This particular module comes with 24 volts dc brake. Also this item has 200v for voltage class.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical Specifications

Manufacturer Allen Bradley
Series Premium Permanent Magnet Food Grade Motors
Product Type Low-Inertia Servo Motor
Environmental rating IP66/IP67 with shaft seal (standard) and use of environmentally sealed cable connectors, Food grade grease on shaft seal
Certifications Bulletin MPF rotary motors are UL Recognized components to applicable UL and CSA standards. CE marked for all applicable directives. Refer to http://www.ab.com for more information.
Continuous stall torque 1.6...19.4 N*m (14...172 lb*in)
Peak stall torque 3.61...48.6 N*m (32...430 lb*in)
Motor rated output 0.73...4.1 kW
Compatible servo drives Kinetix 5500, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, Ultra3000
Typical applications Food packaging, Volumetric filling, Form, fill, seal, Food handling, For meat and poultry applications, the MP-Series Stainless Steel motors are recommended
Voltage Class 200V
Frame Size 100 mm
Magnet Stack Length 50.8 mm (2.0 in.)
Rated Speed 5000 rpm
Feedback Multi-turn, 1024 sin/cos, absolute encoder (Hiperface protocol)
Enclosure/Shaft Key IP66/IP67 housing/Keyed shaft
Connectors Circular (SpeedTec) DIN connector, right angle, 180 degrees rotatable
Brake 24V DC Brake
Mounting Flange IEC metric (oversized), free mounting holes (type FF)
Factory Options Standard
MPN MPF-A320P-MJ74BA
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPF-A320P-MJ74BA?

Answer: Yes. We offer repairs for the MPF-A320P-MJ74BA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPF-A320P-MJ74BA?

Answer: If you buy the MPF-A320P-MJ74BA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPF-A320P-MJ74BA online?

Answer: Yes. Automation Stop sells the MPF-A320P-MJ74BA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPF-A320P-MJ74BA?

Answer: The MPF-A320P-MJ74BA is made by Allen Bradley - Motors.


Question: What is the Brake of the MPF-A320P-MJ74BA?

Answer: The MPF-A320P-MJ74BA has a Brake of 24 volts DC (direct current) Brake.


Question: What Certifications are included with the MPF-A320P-MJ74BA?

Answer: The Allen-Bradley MPF-A320P-MJ74BA includes Bulletin MPF rotary motors are UL Recognized components to applicable UL and CSA standards. CE marked for all applicable directives. Refer to http://www.ab.com for more information. for its Certifications.


Question: What is the Compatible servo drives of the MPF-A320P-MJ74BA?

Answer: The Compatible servo drives of the Rockwell-Automation MPF-A320P-MJ74BA is Kinetix 5500, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, Ultra3000.


Question: What Connectors does the Rockwell Automation MPF-A320P-MJ74BA have?

Answer: The Connectors of the Rockwell Automation MPF-A320P-MJ74BA is Circular (SpeedTec) DIN connector, right angle, 180 degrees rotatable.


Question: What is the Continuous stall torque of the MPF-A320P-MJ74BA?

Answer: The Continuous stall torque of the Allen-Bradley MPF-A320P-MJ74BA is 1.6...19.4 N*m (14...172 lb*in).


Question: What is the Enclosure/Shaft Key of the MPF-A320P-MJ74BA?

Answer: The MPF-A320P-MJ74BA has a Enclosure/Shaft Key of IP66/IP67 housing/Keyed shaft.


Question: What is the Environmental rating of the MPF-A320P-MJ74BA?

Answer: The Environmental rating of the Rockwell-Automation MPF-A320P-MJ74BA is IP66/IP67 with shaft seal (standard) and use of environmentally sealed cable connectors, Food grade grease on shaft seal.


Question: What kind of Factory Options does the Allen Bradley MPF-A320P-MJ74BA have?

Answer: The MPF-A320P-MJ74BA includes Standard for its Factory Options.


Question: What is the Feedback of the MPF-A320P-MJ74BA?

Answer: The Allen-Bradley MPF-A320P-MJ74BA has a Feedback of Multi-turn, 1024 sin/cos, absolute encoder (Hiperface protocol).


Question: What is the Frame Size of the MPF-A320P-MJ74BA?

Answer: The MPF-A320P-MJ74BA has a Frame Size of 100 mm.


Question: What Magnet Stack Length does the Rockwell-Automation MPF-A320P-MJ74BA have?

Answer: The Rockwell-Automation MPF-A320P-MJ74BA has a Magnet Stack Length of 50.8 mm (2.0 in.).


Question: What Motor rated output does the MPF-A320P-MJ74BA have?

Answer: The Motor rated output of the MPF-A320P-MJ74BA is 0.73...4.1 kW.


Question: What Mounting Flange does the MPF-A320P-MJ74BA have?

Answer: The MPF-A320P-MJ74BA has a IEC metric (oversized), free mounting holes (type FF) Mounting Flange.


Question: What Peak stall torque does the MPF-A320P-MJ74BA have?

Answer: The Peak stall torque of the MPF-A320P-MJ74BA is 3.61...48.6 N*m (32...430 lb*in).


Question: What Product Type does the Allen Bradley/Rockwell Automation MPF-A320P-MJ74BA have?

Answer: The MPF-A320P-MJ74BA has a Low-Inertia Servo Motor Product Type.


Question: What is the Rated Speed of the Allen Bradley Automation MPF-A320P-MJ74BA?

Answer: The Rated Speed of the MPF-A320P-MJ74BA is 5000 revolutions per minute (RPM).


Question: What Typical applications are included with the MPF-A320P-MJ74BA?

Answer: The MPF-A320P-MJ74BA has Typical applications Food packaging, Volumetric filling, Form, fill, seal, Food handling, For meat and poultry applications, the MP-Series Stainless Steel motors are recommended.


Question: What is the Voltage Class of the MPF-A320P-MJ74BA?

Answer: The MPF-A320P-MJ74BA has a Voltage Class of 200V.


Series information for MPF-A320P-MJ74BA

For additional information about MPF-A320P-MJ74BA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPF-A320P-MJ74BA.

Revision Part # Also Known As Availability
MPF-A320P-MJ74BA/A MPF-A320P-MJ74BA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPF-A320P-MJ748A
  • MPF-A32OP-MJ74BA
  • MPF-A32OP-MJ748A

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP