GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-A1520U-VJ72AA |
Series: | MPL Servo Motors |
Description:
This MPL-A1520U-VJ72AA by Allen-Bradley/Rockwell Automation is a 7000 RPM low-inertia servo motor. The motor is part of the 200 volts voltage class and has a rotor inertia of 0.000013 kg-m². This product has a 50.8 mm magnetic stack, SpeedTec DIN connectors, and no brakes. The MPL-A1520U-VJ72AA has a rated output of 0.27 kW, a continuous output torque of 0.49 Nm, a peak output torque of 1.58 Nm, and a 63 mm frame size.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley MPL-A1520U-VJ72AA is a MP premium permanent magnet low-inertia 200 VAC class servo motor with a frame size of 63 millimeters or 15 (IEC 72-1 flange number). At a rated and maximum speed of 7000 RPM, this motor has no brakes or shaft seal. Rated 0.27 kW output power can be observed with a low-inertia of 1.3E-05 kg-m². This motor has a continuous output torque of 0.49 Nm and a peak output torque of 1.58 Nm. The magnetic stack length is 50.8 mm and it comes with SpeedTec DIN connectors and free mounting holes for a M7 type motor end. This is an absolute multi-turn Sin/Cos 128 cycles/rev feedback system with a flange of IEC metric and standard factory designed options This servo motor can be used in many Allen-Bradley devices. This servo motor is compatible with the drive series of the Kinetix models 5500, 6200, 6000, 300, 350, 2000, 700 and Ultra 3000. This motor has a weight of about 1.2 kg (2.6 lb) and it can bear an acceleration of maximum 2.5 m/s² and an operational vibrational frequency of 2000 Hz. It can withstand a shock of a maximum acceleration of 20 g and a duration of maximum 6 ms (millisecond). It should be kept at a non-condensing environment at an operational temperature of 0 to 40 °C and a storage temperature of -30 to 70 °C. To protect the motor from environmental factors, the humidity level should be a min of 5 percent of relative humidity and can reach to a maximum of 95 percent relative humidity.
MPN | MPL-A1520U-VJ72AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Frame Size | 165 mm |
Magnetic Stack Length | 2 in |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular DIN, right angle, 180 degree rotatable |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-A1520U-VJ72AA?
Answer: Yes. We offer repairs for the MPL-A1520U-VJ72AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A1520U-VJ72AA?
Answer: If you buy the MPL-A1520U-VJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-A1520U-VJ72AA online?
Answer: Yes. Automation Stop sells the MPL-A1520U-VJ72AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-A1520U-VJ72AA?
Answer: The MPL-A1520U-VJ72AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-A1520U-VJ72AA?
Answer: The MPL-A1520U-VJ72AA is part of the MPL Servo Motors series.
Question: Does the MPL-A1520U-VJ72AA have a Brake?
Answer: No brake.
Question: What Connectors does the MPL-A1520U-VJ72AA have?
Answer: The Connectors of the MPL-A1520U-VJ72AA is Circular DIN, right angle, 180 degree rotatable.
Question: What Factory Designated Options are included with the Rockwell Automation MPL-A1520U-VJ72AA?
Answer: The Rockwell Automation MPL-A1520U-VJ72AA has Factory Designated Options Standard.
Question: What is the Frame Size of the Rockwell-Automation MPL-A1520U-VJ72AA?
Answer: The Frame Size of the MPL-A1520U-VJ72AA is 165 mm.
Question: What is the Magnetic Stack Length of the MPL-A1520U-VJ72AA?
Answer: The MPL-A1520U-VJ72AA has a Magnetic Stack Length of 2 in.
Question: What Mounting Flange does the MPL-A1520U-VJ72AA have?
Answer: The Allen Bradley MPL-A1520U-VJ72AA has a IEC Metric Mounting Flange.
Question: What Shaft Key/Seal does the Rockwell-Automation MPL-A1520U-VJ72AA have?
Answer: The MPL-A1520U-VJ72AA has a Shaft key/no shaft seal Shaft Key/Seal.
For additional information about MPL-A1520U-VJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A1520U-VJ72AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-A1520U-VJ72AA/A | MPL-A1520U-VJ72AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.