GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley MPL-A320P-HJ22AA

✓ In Stock

MPL-A320P-HJ22AA Image 1 thumbnail
MPL-A320P-HJ22AA Image 2 thumbnail
Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-A320P-HJ22AA
Series: MPL Servo Motors

Description:

The MPL-A320P-HJ22AA, by Allen-Bradley/Rockwell Automation, is a servo motor that has a maximum speed of 5000 rpm with low inertia of 0.000078 kg m�. This drive is part of the 200 VAC voltage class. This product has a 50.8 mm magnetic stack, circular bayonet connector, and no brakes. It operates at a rated power of 1.3 kW, continuous stall torque of 3.05 Nm, a peak stall torque of 7.91 Nm. The MPL-A320P-HJ22AA has a 100 mm frame size.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$3,978.00

Available: 1

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$3,183.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a MPL-A320P-HJ22AA? We can help!

Request a Quote

Key Features:

  • comes with iec metric mounting flange
  • has a voltage class of 200 volts ac

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen Bradley MPL-A320P-HJ22AA is part of the MPL series of brushless series servo motors. The drive has an IEC metric frame size of 100 mm (Frame 3/Frame 100), which makes the drive quite compact. The MPL-A320P-HJ22AA has an approximate weight of 3.7 kg (8.0 lbs.). MPL drives are known for their speed, with this servo motor capable of reaching a maximum speed of 5000 rpm. This high speed is also complemented by the fact that an incremental encoder feedback system is used. This encoder can measure at a speed of 2000 lines per revolution. This brushless servo motor has a magnetic stack length of 2 inches (50.8 mm). The stability of the servo motor also depends on the circular bayonet connector that faces the keyed shaft. The MPL-A320P-HJ22AA has an inertia of 0.000078 kg m² and rated output power of 1.3 kW. This motor generates a continuous torque of 3.05 Nm at 0 speed (stall), and the maximum torque that can be achieved in a short duration is 7.91 Nm. Some other specifications include that this motor belongs to the 200 V AC class, there are no brakes on this servo motor, and there is no seal on the shaft. The brake equipped on this servo motor is intended to be used as a holding brake and should only be used as a stopping brake when necessary. The MPL-A32OP-HJ22AA is only dust resistant with an IP50 and IP66 rating. Regular maintenance is necessary while keeping the product in a well-ventilated dry environment. It is also necessary to mention that the above-mentioned specifications are all up to the factory standard.

Technical Specifications

MPN MPL-A320P-HJ22AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Voltage Class 200V
Frame Size 100 mm
Magnetic Stack Length 2 in
Rated Speed 5000 rpm
Feeback 2000 line encoder
Shaft Key/Seal Shaft key/no shaft seal
Connectors Circular bayonet, facing shaft
Brake No brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPL-A320P-HJ22AA?

Answer: Yes. We offer repairs for the MPL-A320P-HJ22AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A320P-HJ22AA?

Answer: If you buy the MPL-A320P-HJ22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-A320P-HJ22AA online?

Answer: Yes. Automation Stop sells the MPL-A320P-HJ22AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-A320P-HJ22AA?

Answer: The MPL-A320P-HJ22AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-A320P-HJ22AA?

Answer: The MPL-A320P-HJ22AA is part of the MPL Servo Motors series.


Question: Does the MPL-A320P-HJ22AA have a Brake?

Answer: No brake.


Question: What kind of Connectors does the Allen Bradley/Rockwell Automation MPL-A320P-HJ22AA have?

Answer: The MPL-A320P-HJ22AA has Connectors Circular bayonet, facing shaft.


Question: What Factory Designated Options are included with the Allen Bradley MPL-A320P-HJ22AA?

Answer: The MPL-A320P-HJ22AA includes Standard for its Factory Designated Options.


Question: What is the Feeback of the Allen Bradley-Rockwell Automation MPL-A320P-HJ22AA?

Answer: The Feeback of the Allen Bradley-Rockwell Automation MPL-A320P-HJ22AA is 2000 line encoder.


Question: What Frame Size does the MPL-A320P-HJ22AA have?

Answer: The MPL-A320P-HJ22AA has a Frame Size of 100 mm.


Question: What is the Magnetic Stack Length of the MPL-A320P-HJ22AA?

Answer: The Allen Bradley-Rockwell Automation MPL-A320P-HJ22AA has a Magnetic Stack Length of 2 in.


Question: What Mounting Flange is included with the Rockwell-Automation MPL-A320P-HJ22AA?

Answer: The Rockwell-Automation MPL-A320P-HJ22AA has a IEC Metric Mounting Flange.


Question: What Rated Speed does the MPL-A320P-HJ22AA have?

Answer: The Rated Speed of the Allen-Bradley MPL-A320P-HJ22AA is 5000 revolutions per minute (RPM).


Question: What Shaft Key/Seal does the Allen Bradley/Rockwell Automation MPL-A320P-HJ22AA have?

Answer: The Allen Bradley/Rockwell Automation MPL-A320P-HJ22AA has a Shaft key/no shaft seal Shaft Key/Seal.


Question: What Voltage Class does the MPL-A320P-HJ22AA have?

Answer: The Voltage Class of the MPL-A320P-HJ22AA is 200V.


Series information for MPL-A320P-HJ22AA

For additional information about MPL-A320P-HJ22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A320P-HJ22AA.

Revision Part # Also Known As Availability
MPL-A320P-HJ22AA/A MPL-A320P-HJ22AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-A32OP-HJ22AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP