GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B1530U-VJ44AA |
Series: | MPL Servo Motors |
Description:
The Allen-Bradley MPL-B1530U-VJ44AA is a 7000 RPM-rated VAC motor. Additionally, this brushless servo has a 165-millimeter frame and comes pre-installed with a shaft key if one is required. This low inertia permanent magnet servo motor is equipped with a 24 DC brake. Additionally, it has a multi-turn (128 sin/cos) feedback. This device is part of the MPL series product range. DIN connector variants enable connections to be oriented in any direction enabling a single cable variety to be used with all MP series motors. Its constant stall torque ranges from 0.26 to 63 Nm (2.3 to 1440 lb-in.), and its peak torque ranges from 0.77 to 278 N.m (6.8 - 2460 lb-in.).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The MPL-B1530U-VJ44AA is a brushless servo motor that is manufactured by Allen-Bradley. Its primary function is the control of the position. Using a revolutionary design, this low inertia MPL class servo motor has also been reduced in size. In addition, the device has a high torque rating and is capable of handling a wide range of application requirements. Using rare-earth magnets, the gadget can accelerate more quickly. The device additionally features an integrated 24-volt braking option and a standard IEEC 72-1 certified mounting compartment that is not watertight. With the MPL-B1530U-VJ44AA servo motor, all relevant industrial directives have been CE-registered. A temperatures range between 32 and 104 ° F may be employed with the machine. The motor is driven by 400 volts of AC power. The motor's three connections are critical to its overall performance. A high-resolution encoder is used to provide feedback on the device's performance. Both the degree of rotation and the total number of revolutions may be measured using these sensors. Longer lengths of linear motion may be measured with the MPL-B1530U-VJ44AA servo motor when the pivot point of rotation is not approachable. Although it offers a shaft key, the Allen-Bradley produced MPL-B1530U-VJ44AA servo motor lacks a shaft sealing option. The servo motor's shaft seal is an add-on accessory that increases the servo motor's protective level to a safe zone. For mounting operations, an IEC metric flange is employed. This 3-inch servo motor's stack length is normally offered and 7000 RPM is its maximum speed for this machine. This servo motor has a torque rating of 0.90 N-m. Using a novel winding mechanism, the motor can provide 40% more torque than standard servo motors.
MPN | MPL-B1530U-VJ44AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Frame Size | 165 mm |
Magnetic Stack Length | 3 in |
Shaft Key/Seal | Shaft key/no shaft seal |
Brake | 24V DC brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B1530U-VJ44AA?
Answer: Yes. We offer repairs for the MPL-B1530U-VJ44AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B1530U-VJ44AA?
Answer: If you buy the MPL-B1530U-VJ44AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B1530U-VJ44AA online?
Answer: Yes. Automation Stop sells the MPL-B1530U-VJ44AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B1530U-VJ44AA?
Answer: The MPL-B1530U-VJ44AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B1530U-VJ44AA?
Answer: The MPL-B1530U-VJ44AA is part of the MPL Servo Motors series.
Question: What is the Brake of the MPL-B1530U-VJ44AA?
Answer: The Brake of the Allen Bradley MPL-B1530U-VJ44AA is 24 volts direct current (DC) brake.
Question: What kind of Factory Designated Options does the Rockwell-Automation MPL-B1530U-VJ44AA have?
Answer: The MPL-B1530U-VJ44AA has Factory Designated Options Standard.
Question: What is the Frame Size of the MPL-B1530U-VJ44AA?
Answer: The MPL-B1530U-VJ44AA has a Frame Size of 165 mm.
Question: What is the Magnetic Stack Length of the Rockwell Automation MPL-B1530U-VJ44AA?
Answer: The Magnetic Stack Length of the MPL-B1530U-VJ44AA is 3 in .
Question: What Mounting Flange is included with the MPL-B1530U-VJ44AA?
Answer: The MPL-B1530U-VJ44AA has a IEC Metric Mounting Flange.
Question: What Shaft Key/Seal does the Rockwell-Automation MPL-B1530U-VJ44AA have?
Answer: The Rockwell-Automation MPL-B1530U-VJ44AA has a Shaft key/no shaft seal Shaft Key/Seal.
For additional information about MPL-B1530U-VJ44AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B1530U-VJ44AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B1530U-VJ44AA/A | MPL-B1530U-VJ44AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.