GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley MPL-B330P-MK24AA

Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-B330P-MK24AA
Series: MPL Servo Motors

Description:

The Allen Bradley MPL-B330P-MK24AA is a servo motor (brushless). It works with an armature voltage (alternating current) of 400 volts. This motor has permanent magnets and supplies low inertia. Its magnetic stack is 3 inches in length, and the frame (IEC) is 100 millimeters in size. It can handle a speed of 500 rpm maximum. It has encoder-based feedback, sealless plus keyless shaft, and circular bayonet connectors. It also has a 24 volt direct current holding brake.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$4,703.00

Available: 2

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$3,763.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a MPL-B330P-MK24AA? We can help!

Request a Quote

Key Features:

  • contains circular bayonet, facing shaft connector
  • contains iec metric mounting flange
  • has 400 volts ac for voltage class

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The MPL-B330P-MK24AA is a servo motor from the MP series by Allen Bradley. It delivers high output (torque) performance and features low inertia. It belongs to an armature voltage class B ( 400 Volts ). This voltage is an alternating current (AC) type. The motor's frame has IEC 72 - 1 metric-based mounting holes and a measure of 100 millimeters. It includes a permanent magnetic stack having a length of 3 inches. Its torque ratings are the following: 11.1 newton meter (at peak) and 4.18 newton meter (continuous). It has a rated output of 1.8 kilowatts. It weighs approximately 4.6 kilograms.

The MPL-B330P-MK24AA can rotate with the utmost speed of 5000 rpm. At this speed, it can bear a radial force load of about 43 kilograms, and an axial load of about 13 kilograms. If there is an increase in the radial or axial load force, the speed of the motor decreases accordingly. The motor can achieve a speed of 1000 rpm at the radial load of 74 kilograms, and the axial force load of 27 kilograms. It features a multi-turn encoder to offer precise position feedback (high resolution). This electromechanical arrangement does not require the use of a battery. It comes with a shaft that has no key or seal. 

The MPL-B330P-MK24AA has a holding brake, and it demands a voltage of 24 volts (direct current) for its operation. This voltage is met by using external options like servo drives or manual controllers. It has bayonet style connectors for connections that face the shaft. 

Technical Specifications

MPN MPL-B330P-MK24AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Voltage Class 400V
Frame Size 100 mm
Magnetic Stack Length 3 in
Rated Speed 5000 rpm
Feeback Multi-turn high-resolution encoder
Shaft Key/Seal No shaft key/no shaft seal
Connectors Circular bayonet, facing shaft
Brake 24V DC brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPL-B330P-MK24AA?

Answer: Yes. We offer repairs for the MPL-B330P-MK24AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B330P-MK24AA?

Answer: If you buy the MPL-B330P-MK24AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-B330P-MK24AA online?

Answer: Yes. Automation Stop sells the MPL-B330P-MK24AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-B330P-MK24AA?

Answer: The MPL-B330P-MK24AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-B330P-MK24AA?

Answer: The MPL-B330P-MK24AA is part of the MPL Servo Motors series.


Question: What is the Brake of the Rockwell-Automation MPL-B330P-MK24AA?

Answer: The Brake of the MPL-B330P-MK24AA is 24 volts DC brake.


Question: What kind of Connectors does the Rockwell-Automation MPL-B330P-MK24AA have?

Answer: The Rockwell-Automation MPL-B330P-MK24AA has Connectors Circular bayonet, facing shaft.


Question: What kind of Factory Designated Options does the Allen-Bradley MPL-B330P-MK24AA have?

Answer: The MPL-B330P-MK24AA has Factory Designated Options Standard.


Question: What Feeback does the Allen Bradley MPL-B330P-MK24AA have?

Answer: The MPL-B330P-MK24AA has a Multi-turn high-resolution encoder Feeback.


Question: What is the Frame Size of the Rockwell-Automation MPL-B330P-MK24AA?

Answer: The Rockwell-Automation MPL-B330P-MK24AA has a Frame Size of 100 mm.


Question: What Magnetic Stack Length does the MPL-B330P-MK24AA have?

Answer: The Magnetic Stack Length of the MPL-B330P-MK24AA is 3 in .


Question: What Mounting Flange is included with the Allen-Bradley MPL-B330P-MK24AA?

Answer: The Allen-Bradley MPL-B330P-MK24AA has a IEC Metric Mounting Flange.


Question: What is the Rated Speed of the MPL-B330P-MK24AA?

Answer: The Rockwell-Automation MPL-B330P-MK24AA has a Rated Speed of 5000 revolutions per minute (RPM).


Question: Does the MPL-B330P-MK24AA have a Shaft Key/Seal?

Answer: No shaft key/no shaft seal.


Question: What is the Voltage Class of the MPL-B330P-MK24AA?

Answer: The Allen Bradley Automation MPL-B330P-MK24AA has a Voltage Class of 400V.


Series information for MPL-B330P-MK24AA

For additional information about MPL-B330P-MK24AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B330P-MK24AA.

Revision Part # Also Known As Availability
MPL-B330P-MK24AA/A MPL-B330P-MK24AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-B33OP-MK24AA
  • MPL-8330P-MK24AA
  • MPL-833OP-MK24AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP