GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B4520P-SK22AA |
Series: | MPL |
Description:
The Allen Bradley MPL-B4520P-SK22AA is a servo motor. It is a member of the MP series of servo motors from Allen Bradley. This motor belongs to the 400-volt voltage class of servo motors. It has a frame size of 130 millimeters. the magnetic stack length of this servo motor is 2.0 inches. It has a rated speed of 5000 rpm. It is equipped with a single-turn high-resolution encoder. The Allen Bradley MPL-B4520P-SK22AA has an operating temperature of 0 to 40 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley MPL-B4520P-SK22AA is a servo motor that comes with reversible circular bayonet connectors. The connectors point toward the shaft. This servo motor is equipped with a single-turn encoder with the Hiperface protocol. The motor can rotate at a maximum speed of 5000 revolutions per minute (rpm). For safety and protection against external corrosive elements, this module must be placed inside a IP50 rated enclosure. It does not include a shaft seal. This servo motor can be mounted via a flange and has standard IEC metric mounting dimensions. The frame size of this motor is 130 millimeters. For smooth and uninterrupted operation, this servo motor must be supplied with a power voltage of 400 volts alternating current (AC).
The Allen Bradley MPL-B4520P-SK22AA is classified as a low inertia servo motor. This servo motor is able to produce high torque despite have low inertia and having a compact size. Additionally, thanks to the innovative windings, this servo motor is capable of producing higher torque power than most other similar motors. This motor comes with a permanent magnet stack. This magnet stack helps the motor produce a motor output speed. The length of this magnet stack is 20, which is equivalent to 2.0 inches. There is one motor power connector, and one feedback connector on this industrial servo motor. As there is no braking option, this servo motor does not include any brake connectors. The operating temperature range of this servo motor is 0 to 40 degrees Celsius, or 32 to 104 degrees Fahrenheit.
MPN | MPL-B4520P-SK22AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Frame Size | 165 mm |
Magnetic Stack Length | 2 in |
Rated Speed | 5000 rpm |
Feeback | Single-turn high-resolution encoder |
Shaft Key/Seal | No shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B4520P-SK22AA?
Answer: Yes. We offer repairs for the MPL-B4520P-SK22AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B4520P-SK22AA?
Answer: If you buy the MPL-B4520P-SK22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B4520P-SK22AA online?
Answer: Yes. Automation Stop sells the MPL-B4520P-SK22AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B4520P-SK22AA?
Answer: The MPL-B4520P-SK22AA is made by Allen Bradley - Motors.
Question: Does the Allen-Bradley MPL-B4520P-SK22AA have a Brake?
Answer: No brake.
Question: What Connectors are included with the MPL-B4520P-SK22AA?
Answer: The MPL-B4520P-SK22AA has Connectors Circular bayonet, facing shaft.
Question: What kind of Factory Designated Options does the Allen Bradley/Rockwell Automation MPL-B4520P-SK22AA have?
Answer: The Allen Bradley/Rockwell Automation MPL-B4520P-SK22AA includes Standard for its Factory Designated Options.
Question: What Feeback does the MPL-B4520P-SK22AA have?
Answer: The MPL-B4520P-SK22AA has a Single-turn high-resolution encoder Feeback.
Question: What Frame Size does the Allen Bradley/Rockwell Automation MPL-B4520P-SK22AA have?
Answer: The Allen Bradley/Rockwell Automation MPL-B4520P-SK22AA has a Frame Size of 165 mm.
Question: What is the Magnetic Stack Length of the MPL-B4520P-SK22AA?
Answer: The MPL-B4520P-SK22AA has a Magnetic Stack Length of 2 in.
Question: What Mounting Flange does the MPL-B4520P-SK22AA have?
Answer: The Allen Bradley-Rockwell Automation MPL-B4520P-SK22AA has a IEC Metric Mounting Flange.
Question: What Rated Speed does the Allen Bradley Automation MPL-B4520P-SK22AA have?
Answer: The Allen Bradley Automation MPL-B4520P-SK22AA has a Rated Speed of 5000 revolutions per minute (RPM).
Question: Does the MPL-B4520P-SK22AA have a Shaft Key/Seal?
Answer: No shaft key/no shaft seal.
For additional information about MPL-B4520P-SK22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B4520P-SK22AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B4520P-SK22AA/A | MPL-B4520P-SK22AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.