GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B4530K-SJ22AA |
Series: | MPL Servo Motors |
Description:
An MPL series synchronous servo motor, the MPL-B4530K-SJ22AA by Allen-Bradley features alternating current input, Stegmann encoder protocol, and 400 volts-class windings. It has a 4000-rpm rated speed, 2.6 kilowatts rated power, and no holding brake. It offers low rotor inertia, 76.2 millimeters magnetic stack length, high torques, and a frame size of 130 millimeters. It weighs nearly 7.3 kilograms and encloses bayonet connectors. This device holds type FF holes for fitting (IEC72 -1 dimensions).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley's MPL-B4530K-SJ22AA Kinetix servo motor is an alternating current type synchronous motor. It offers a motion control solution for applications that require precise position/speed control, such as the automatic industry. The closed-loop feedback system in this motor provides exact control and is based on a single-turn rotary encoder that only provides accurate control over 1 rotation (360 degrees). This motor is also preferred for applications where motor weight is a sensitive parameter. As it uses permanent magnets, this motor has less weight and high output torques. MPL-B4530K-SJ22AA's mechanical dimensions are in accordance with IEC 72 - 1 standard. The motor's frame is 130 millimeters in size and has free mounting holes. It has a shaft key AND an optional steel key for rigid connection. It contains bayonet connectors that are round and non-rotatable for connections. It encloses a permanent magnetic stack that measures 3 inches in length. Its armature windings run 400 volts alternating current (AC) through them. These fields (magnetic and armature) interactions can turn the rotor of a motor with a max speed of 4000 rpm (revolutions per minute), and the peak maximal achievable stall torque is 20.3 newton-meters. The MPL-B4530K-SJ22AA can be controlled to provide 8.13 Newton meters of rated continuous stall torque. It comes with bearings that can last up to 20,000 hours that depend on the axial and radial loads on the shaft of the motor. At 4000 rpm, it can bear 66 kilograms (kg) of radial load and 19 kilograms of axial load. While increasing these load values, the speed also changes accordingly.
MPN | MPL-B4530K-SJ22AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Frame Size | 165 mm |
Magnetic Stack Length | 3 in |
Rated Speed | 4000 rpm |
Feeback | Single-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B4530K-SJ22AA?
Answer: Yes. We offer repairs for the MPL-B4530K-SJ22AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B4530K-SJ22AA?
Answer: If you buy the MPL-B4530K-SJ22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B4530K-SJ22AA online?
Answer: Yes. Automation Stop sells the MPL-B4530K-SJ22AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B4530K-SJ22AA?
Answer: The MPL-B4530K-SJ22AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B4530K-SJ22AA?
Answer: The MPL-B4530K-SJ22AA is part of the MPL Servo Motors series.
Question: Does the MPL-B4530K-SJ22AA have a Brake?
Answer: No brake.
Question: What Connectors are included with the Allen Bradley-Rockwell Automation MPL-B4530K-SJ22AA?
Answer: The MPL-B4530K-SJ22AA has Connectors Circular bayonet, facing shaft.
Question: What kind of Factory Designated Options does the MPL-B4530K-SJ22AA have?
Answer: The MPL-B4530K-SJ22AA has Factory Designated Options Standard.
Question: What Feeback is included with the MPL-B4530K-SJ22AA?
Answer: The Allen-Bradley MPL-B4530K-SJ22AA has a Single-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the Allen Bradley MPL-B4530K-SJ22AA?
Answer: The MPL-B4530K-SJ22AA has a Frame Size of 165 mm.
Question: What is the Magnetic Stack Length of the Allen-Bradley MPL-B4530K-SJ22AA?
Answer: The Magnetic Stack Length of the MPL-B4530K-SJ22AA is 3 in .
Question: What Mounting Flange does the MPL-B4530K-SJ22AA have?
Answer: The MPL-B4530K-SJ22AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-B4530K-SJ22AA?
Answer: The Rated Speed of the MPL-B4530K-SJ22AA is 4000 revolutions per minute (RPM).
Question: What Shaft Key/Seal does the Allen Bradley Automation MPL-B4530K-SJ22AA have?
Answer: The MPL-B4530K-SJ22AA has a Shaft key/no shaft seal Shaft Key/Seal.
For additional information about MPL-B4530K-SJ22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B4530K-SJ22AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B4530K-SJ22AA/A | MPL-B4530K-SJ22AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.