GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B580J-SK24AA |
Series: | MPL Servo Motors |
Description:
Allen-Bradley's MPL-B580J-SK24AA uses smart motor technology for high performance. It is a low inertial compact servo motor with a body frame of 165 millimeters and stronger torques. It has a rated speed of 3750 revolutions per minute (rpm), 34.0-newton meters constant stalling torque, 7.9 kilowatts power, and it weighs approximately 63.8 pounds. It backs a magnet stacking of 8 inches (in.), an alternating voltage winding of 400 volts, low inertia, a direct current braking system of 24 volts, absolute feedback, IEC dimensions, and bayonet connectors.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley MPL-B580J-SK24AA, an MPL servo motor, offers low-inertia, high-output, and synchronous operation. It embodies unique design innovations such as permanent magnets to reduce motor size while delivering much more torque. It is an alternating current (AC) rotary motor with armature class B windings of 400 volts. It sources a magnetic field from strong permanent magnets (PM) instead of field windings, and its PM stack covers almost 8.00 inches in length. Despite its small size and low inertia, it can revolve at a pace of 3750 rpm (revolutions per minute). Its frame measures 165 millimeters, and the net weight of the motor, including the holding brake, is approximately 63.8 pounds. Furthermore, its dimensions are in compliance with metric IEC 72-1. A single turn (360 degrees) encoder in the motor counts the one degree of rotation.
Part number MPL-B580J-SK24AA has a DC (direct current)-powered electromechanical brake. It also requires 1.05 to 1.28 amperes current at a nominal voltage of 24 volts DC. It is a holding brake that keeps the load still at required positions. It can hold a load still up to holding torque of 28.3 Newton-meters. Servo drives could be used to run themselves automatically, or they could be managed by humans by attaching an external power source. Circular bayonet connectors are used for all input connections, including feedback cable, power supply unit wires, and brake power connections. It has a continuous stalling torque listed value of 34 Newton-meters and a peak stalling torque listed value of 81 Newton-meters.
MPN | MPL-B580J-SK24AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 400V |
Frame Size | 165 mm |
Magnetic Stack Length | 8 in |
Rated Speed | 3750 rpm |
Feeback | Single-turn high-resolution encoder |
Shaft Key/Seal | No shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | 24V DC brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B580J-SK24AA?
Answer: Yes. We offer repairs for the MPL-B580J-SK24AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B580J-SK24AA?
Answer: If you buy the MPL-B580J-SK24AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B580J-SK24AA online?
Answer: Yes. Automation Stop sells the MPL-B580J-SK24AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B580J-SK24AA?
Answer: The MPL-B580J-SK24AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B580J-SK24AA?
Answer: The MPL-B580J-SK24AA is part of the MPL Servo Motors series.
Question: What is the Brake of the MPL-B580J-SK24AA?
Answer: The Brake of the Allen Bradley Automation MPL-B580J-SK24AA is 24 volts DC brake.
Question: What Connectors are included with the Rockwell-Automation MPL-B580J-SK24AA?
Answer: The MPL-B580J-SK24AA has Connectors Circular bayonet, facing shaft.
Question: What Factory Designated Options are included with the MPL-B580J-SK24AA?
Answer: The Allen Bradley MPL-B580J-SK24AA has Factory Designated Options Standard.
Question: What Feeback is included with the Allen Bradley-Rockwell Automation MPL-B580J-SK24AA?
Answer: The MPL-B580J-SK24AA has a Single-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the MPL-B580J-SK24AA?
Answer: The Frame Size of the Allen Bradley/Rockwell Automation MPL-B580J-SK24AA is 165 mm.
Question: What Magnetic Stack Length does the Allen Bradley MPL-B580J-SK24AA have?
Answer: The Allen Bradley MPL-B580J-SK24AA has a Magnetic Stack Length of 8 in.
Question: What Mounting Flange does the Rockwell-Automation MPL-B580J-SK24AA have?
Answer: The MPL-B580J-SK24AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-B580J-SK24AA?
Answer: The Rated Speed of the Allen Bradley MPL-B580J-SK24AA is 3750 revolutions per minute (RPM).
Question: Does the Allen Bradley-Rockwell Automation MPL-B580J-SK24AA have a Shaft Key/Seal?
Answer: No shaft key/no shaft seal.
Question: What is the Voltage Class of the MPL-B580J-SK24AA?
Answer: The Voltage Class of the Rockwell-Automation MPL-B580J-SK24AA is 400V.
For additional information about MPL-B580J-SK24AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B580J-SK24AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B580J-SK24AA/A | MPL-B580J-SK24AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.