GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | MPM-A1152F-MJ74AA |
Series: | MPM |
Description:
The Allen-Bradley MPM-A1152F-MJ72AA is an MP series Kinetix medium inertia AC servo motor. The standard premium 2-stack permanent magnet rotary motor has a 240-volt AC rated voltage, 115 millimeter frame size, a 3000 rpm rated speed, and a 4.74 Nm torque rating. Its armature voltage is 230 volts and brake voltage is 24 volts DC. It has a 0.748 inch diameter shaft size and an IP65/IP67 enclosure rating. The additional features of the motor include a keyed shaft, a multi-turn high-resolution encoder with absolute feedback, and a brushless synchronous motor.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley MPM-A1152F-MJ72AA is a Kinetix MP series medium inertia AC servo motor designed with standard premium two (2)-stack permanent magnet rotary motor. The motor operates on a rated voltage of 240 volts alternating current (AC) and a frame of size one hundred and fifteen (115) millimeters (4.53 in). It has an angular speed of 3000 revolutions per minute (rpm), and a maximum torque rating equal to 4.74 Nm. The 180-degree rotatable AC motor has an armature voltage of 230 volts with a brake option of 24 volts DC. It has a shaft size of 0.748 in diameter. The motor has a radial load force rating of 58 kg (128 lb) and an axial load force rating of 19 kg (42 lb) with maximum radial load and 28 kg (62 lb) at zero radial load.
Additional features include a shaft key, a multi-turn high-res encoder with absolute feedback, and brushless synchronous motor. The motor is packaged in an IP65/IP67 rated enclosure with a keyed shaft extension, and has free mounting holes. Its physical dimensions measure 8.48 x 3.87 x 5.52 inches (L x W x H) and it weighs roughly 13.98 kg. The motor can be operated within a temperature rating of 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit) with a humidity rating of 5 to 95% non-condensing.
The AC motor is designed with mounting measurements that adhere to IEC metrics. The motor allows full 180º rotatable DIN connectors that enable convenient cable routing and adaptable orientation options. All MP series motors by Allen-Bradley can be compatibly used with Kinetix servo drive model numbers 300, 350, 5500, 6000, 6200, and 6500. They also come with comparable speed and torque capabilities, and utilize feedback mechanisms and rotor inertia, therefore, providing a smooth transition from legacy motors.
MPN | MPM-A1152F-MJ74AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Medium-inertia Servo Motor with 115mm to 215 mm Frame Size |
Voltage Class | 200V |
Frame Size-Bolt Circle Diameter | 115 mm |
Magnet Stacks | 2 stacks |
Base Speed | 3000 rpm |
Feedback | Multi-turn high-resolution encoder |
Enclosure/Shaft Key/Shaft Seal | IP65/IP67 housing/shaft key/no shaft seal |
Connectors | Circluar, right angle, 180 degree rotatable |
Brake | 24V DC brake |
Mounting Flange | IEC metric |
Factory Designated Options | Standard factory configuration |
Question: Does Automation Stop offer repairs on the MPM-A1152F-MJ74AA?
Answer: Yes. We offer repairs for the MPM-A1152F-MJ74AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPM-A1152F-MJ74AA?
Answer: If you buy the MPM-A1152F-MJ74AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPM-A1152F-MJ74AA online?
Answer: Yes. Automation Stop sells the MPM-A1152F-MJ74AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPM-A1152F-MJ74AA?
Answer: The MPM-A1152F-MJ74AA is made by Allen Bradley - Motors.
Question: What Base Speed does the MPM-A1152F-MJ74AA have?
Answer: The MPM-A1152F-MJ74AA has a Base Speed of 3000 revolutions per minute (RPM).
Question: What Brake does the Allen Bradley Automation MPM-A1152F-MJ74AA have?
Answer: The MPM-A1152F-MJ74AA has a Brake of 24 volts DC brake.
Question: What is the Connectors of the MPM-A1152F-MJ74AA?
Answer: The MPM-A1152F-MJ74AA has a Connectors of Circluar, right angle, 180 degree rotatable.
Question: What is the Enclosure/Shaft Key/Shaft Seal of the Rockwell Automation MPM-A1152F-MJ74AA?
Answer: The Enclosure/Shaft Key/Shaft Seal of the Rockwell Automation MPM-A1152F-MJ74AA is IP65/IP67 housing/shaft key/no shaft seal.
Question: What kind of Factory Designated Options does the MPM-A1152F-MJ74AA have?
Answer: The MPM-A1152F-MJ74AA includes Standard factory configuration for its Factory Designated Options.
Question: What Feedback is included with the Allen Bradley MPM-A1152F-MJ74AA?
Answer: The MPM-A1152F-MJ74AA has a Multi-turn high-resolution encoder Feedback.
Question: What is the Frame Size-Bolt Circle Diameter of the MPM-A1152F-MJ74AA?
Answer: The MPM-A1152F-MJ74AA has a Frame Size-Bolt Circle Diameter of 115 mm.
Question: What is the Magnet Stacks of the MPM-A1152F-MJ74AA?
Answer: The MPM-A1152F-MJ74AA has a Magnet Stacks of 2 stacks.
Question: What Mounting Flange does the Allen Bradley-Rockwell Automation MPM-A1152F-MJ74AA have?
Answer: The MPM-A1152F-MJ74AA has a IEC metric Mounting Flange.
Question: What is the Voltage Class of the Allen Bradley Automation MPM-A1152F-MJ74AA?
Answer: The Voltage Class of the MPM-A1152F-MJ74AA is 200V.
For additional information about MPM-A1152F-MJ74AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPM-A1152F-MJ74AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPM-A1152F-MJ74AA/A | MPM-A1152F-MJ74AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.