GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

MPM-B1151F-MJ72AA

Manufacturer: Allen Bradley - Motors
Product Type: Servo Motor
Part Number: MPM-B1151F-MJ72AA
Series: MPM Servo Motors

Description:

Allen Bradley's MPM-B1151F-MJ72AA servo motor has medium inertia. It has a base speed of 3000 rev/min, a rated speed of 4000 rpm, and a maximum speed of 5000 rpm. Its features are; a multiturn encoder, 460 volts alternating current windings, 2.18 Newton meters constant output torque, 400 VAC voltage class, 115-millimeter frame, and one (1) magnetic stack. Circular DIN connectors and keyed sealess shaft are also included. It has a maximum operating temperature of 40degrees.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

MPM-B1151F-MJ72AA is an MP Series Medium Inertia (MPM) servo motor by Allen Bradley. It does offer IEC metric mounting dimensions as well as rotatable DIN connectors, which allow for flexible connector orientation for easier cable routing. This motor has comparable speed and torque capabilities, feedback modules, and rotor inertias, permitting for a seamless transition from legacy motors (MPL motors).


MPM-B1151F-MJ72AA offers (base speed) 3000 revolutions per minute (rpm) to (maximum speed) 5000 rpm of the speed range. At its rated speed of 4000 rpm, it can have a rated output of 0.75 kilowatts. It may output 2.18 Newton meters (Nm) and 2.7 amperes (A) of continuous stall torque and current, respectively. It delivers 6.6 Nm and 9.9 A of peak stall torque and current, respectively. It has a rated rotor inertia of 0.00065 kilogram- meter squared. It belongs to the 400 volts alternating current (VAC) class of voltage. This motor comes with permanent magnets and has 1 magnet stack length. Its armature windings have a rating of 460 VAC. It comes with a multiturn feedback type, with a resolution of 1024 cycles per revolution. And, it has a hiperface feedback protocol. 


MPM-B1151F-MJ72AA has 115 millimeters frame size and weighs around 3.45 kilograms. It has an IP rating of IP 50 without shaft seals. It can offer an IP rating of IP67 if environmentally friendly cable connectors and seals for the shaft are used in a motor. It also has a keyed shaft, but no shaft seal is present that can be added to increase the IP rating of this motor.

 

Technical Specifications

MPN MPM-B1151F-MJ72AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Medium-inertia Servo Motor with 115mm to 215 mm Frame Size
Voltage Class 400V
Frame Size-Bolt Circle Diameter 115 mm
Magnet Stacks 1 stack
Base Speed 3000 rpm
Feedback Multi-turn high-resolution encoder
Enclosure/Shaft Key/Shaft Seal IP65/IP67 housing/shaft key/no shaft seal
Connectors Circluar, right angle, 180 degree rotatable
Brake No brake
Mounting Flange IEC metric
Factory Designated Options Standard factory configuration
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPM-B1151F-MJ72AA?

Answer: Yes. We offer repairs for the MPM-B1151F-MJ72AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPM-B1151F-MJ72AA?

Answer: If you buy the MPM-B1151F-MJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPM-B1151F-MJ72AA online?

Answer: Yes. Automation Stop sells the MPM-B1151F-MJ72AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPM-B1151F-MJ72AA?

Answer: The MPM-B1151F-MJ72AA is made by Allen Bradley - Motors.


Question: What type of product is the MPM-B1151F-MJ72AA?

Answer: The MPM-B1151F-MJ72AA is part of the MPM Servo Motors series.


Question: What is the Base Speed of the Allen-Bradley MPM-B1151F-MJ72AA?

Answer: The MPM-B1151F-MJ72AA has a Base Speed of 3000 revolutions per minute (RPM).


Question: Does the MPM-B1151F-MJ72AA have a Brake?

Answer: No brake.


Question: What is the Connectors of the MPM-B1151F-MJ72AA?

Answer: The Connectors of the Rockwell Automation MPM-B1151F-MJ72AA is Circluar, right angle, 180 degree rotatable.


Question: What is the Enclosure/Shaft Key/Shaft Seal of the MPM-B1151F-MJ72AA?

Answer: The Allen-Bradley MPM-B1151F-MJ72AA has a Enclosure/Shaft Key/Shaft Seal of IP65/IP67 housing/shaft key/no shaft seal.


Question: What kind of Factory Designated Options does the Allen-Bradley MPM-B1151F-MJ72AA have?

Answer: The Allen-Bradley MPM-B1151F-MJ72AA has Factory Designated Options Standard factory configuration.


Question: What Feedback is included with the MPM-B1151F-MJ72AA?

Answer: The MPM-B1151F-MJ72AA has a Multi-turn high-resolution encoder Feedback.


Question: What is the Frame Size-Bolt Circle Diameter of the Allen Bradley MPM-B1151F-MJ72AA?

Answer: The MPM-B1151F-MJ72AA has a Frame Size-Bolt Circle Diameter of 115 mm.


Question: What Magnet Stacks does the MPM-B1151F-MJ72AA have?

Answer: The Magnet Stacks of the MPM-B1151F-MJ72AA is 1 stack.


Question: What Mounting Flange is included with the Allen Bradley Automation MPM-B1151F-MJ72AA?

Answer: The Allen Bradley Automation MPM-B1151F-MJ72AA has a IEC metric Mounting Flange.


Question: What is the Voltage Class of the MPM-B1151F-MJ72AA?

Answer: The Rockwell Automation MPM-B1151F-MJ72AA has a Voltage Class of 400V.


Series information for MPM-B1151F-MJ72AA

For additional information about MPM-B1151F-MJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPM-B1151F-MJ72AA.

Revision Part # Also Known As Availability
MPM-B1151F-MJ72AA/A MPM-B1151F-MJ72AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPM-B115IF-MJ72AA
  • MPM-B11S1F-MJ72AA
  • MPM-B11SIF-MJ72AA
  • MPM-B1I51F-MJ72AA
  • MPM-B1I5IF-MJ72AA
  • MPM-B1IS1F-MJ72AA
  • MPM-B1ISIF-MJ72AA
  • MPM-BI151F-MJ72AA
  • MPM-BI15IF-MJ72AA
  • MPM-BI1S1F-MJ72AA
  • MPM-BI1SIF-MJ72AA
  • MPM-BII51F-MJ72AA
  • MPM-BII5IF-MJ72AA
  • MPM-BIIS1F-MJ72AA
  • MPM-BIISIF-MJ72AA
  • MPM-81151F-MJ72AA
  • MPM-8115IF-MJ72AA
  • MPM-811S1F-MJ72AA
  • MPM-811SIF-MJ72AA
  • MPM-81I51F-MJ72AA
  • MPM-81I5IF-MJ72AA
  • MPM-81IS1F-MJ72AA
  • MPM-81ISIF-MJ72AA
  • MPM-8I151F-MJ72AA
  • MPM-8I15IF-MJ72AA
  • MPM-8I1S1F-MJ72AA
  • MPM-8I1SIF-MJ72AA
  • MPM-8II51F-MJ72AA
  • MPM-8II5IF-MJ72AA
  • MPM-8IIS1F-MJ72AA
  • MPM-8IISIF-MJ72AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP