GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley MPM-B1152T-MJ74AA

MPM-B1152T-MJ74AA Image 1 thumbnail
MPM-B1152T-MJ74AA Image 2 thumbnail
MPM-B1152T-MJ74AA Image 3 thumbnail
MPM-B1152T-MJ74AA Image 4 thumbnail
Manufacturer: Allen Bradley - Motors
Product Type: Servo Motor
Part Number: MPM-B1152T-MJ74AA
Series: MPM Servo Motors

Description:

Allen-Bradley's MPM-B1152T-MJ74AA is a medium inertia rotary servo motor. Its electrical need is 400 volts alternating current (AC) to start the motor and 24.0 volts direct current (DC) for the holding brake. It includes a 460-volt AC armature winding, a frame that measures 115 millimeters, and 2 magnet stacks. It has a base speed of 6,000 rpm. This motor also has multiturn encoder feedback, right angle DIN connectors, a shaft with a threaded end, and a key.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number MPM-B1152T-MJ74AA is a servo motor from the Bulletin MPM series by Allen-Bradley / Rockwell automation. The Bulletin series features motors that are small, power-dense, and feature-rich for greater inertia applications. This servo motor, which leverages the renowned MP-Series motor technology and performance standards, is excellent for users with printing, conversion, website processing, automotive, and several other applications that require greater power in a smaller size. It is equipped with a rotor which is well suited for loads with higher inertia.

The MPM-B1152T-MJ74AA features a rotary encoder that offers highly efficient multi-turn feedback. This feedback design is not an electrical system, as no power source is needed to activate it as it is the electromechanical mechanism. The circle that passes through the center of all the holes on the motor's frame has a diameter of 115 millimeters, and these holes' locations and sizes follow the IEC 72-1 standard. It also features a total of 2 magnetic stacks.

The base speed of the MPM-B1152T-MJ74AA is 6,000 revolutions per minute (rpm), with a maximum speed rated at 7,000 rpm. The rated speed for this motor is 4,000 rpm. It is designed to provide 4.74 Newton meters output torque continuously. To provide this torque, the motor draws 11 amperes. At higher loading of the shaft, its torque can be extended to 13.5 Newton meters (peak). At this peak value, the motor draws 37.9 amperes. This motor assembly also includes a holding brake that needs a power source with a terminal voltage of 24 volts and can provide a current of 0.45 to 0.55 amperes.

Technical Specifications

MPN MPM-B1152T-MJ74AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Medium-inertia Servo Motor with 115mm to 215 mm Frame Size
Voltage Class 400V
Frame Size-Bolt Circle Diameter 115 mm
Magnet Stacks 2 stacks
Base Speed 6000 rpm
Feedback Multi-turn high-resolution encoder
Enclosure/Shaft Key/Shaft Seal IP65/IP67 housing/shaft key/no shaft seal
Connectors Circluar, right angle, 180 degree rotatable
Brake 24V DC brake
Mounting Flange IEC metric
Factory Designated Options Standard factory configuration
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPM-B1152T-MJ74AA?

Answer: Yes. We offer repairs for the MPM-B1152T-MJ74AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPM-B1152T-MJ74AA?

Answer: If you buy the MPM-B1152T-MJ74AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPM-B1152T-MJ74AA online?

Answer: Yes. Automation Stop sells the MPM-B1152T-MJ74AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPM-B1152T-MJ74AA?

Answer: The MPM-B1152T-MJ74AA is made by Allen Bradley - Motors.


Question: What type of product is the MPM-B1152T-MJ74AA?

Answer: The MPM-B1152T-MJ74AA is part of the MPM Servo Motors series.


Question: What Base Speed does the MPM-B1152T-MJ74AA have?

Answer: The Base Speed of the Allen Bradley/Rockwell Automation MPM-B1152T-MJ74AA is 6000 revolutions per minute (RPM).


Question: What Brake does the MPM-B1152T-MJ74AA have?

Answer: The Brake of the MPM-B1152T-MJ74AA is 24 volts DC (direct current) brake.


Question: What is the Connectors of the Rockwell Automation MPM-B1152T-MJ74AA?

Answer: The Rockwell Automation MPM-B1152T-MJ74AA has a Connectors of Circluar, right angle, 180 degree rotatable.


Question: What Enclosure/Shaft Key/Shaft Seal does the Allen Bradley-Rockwell Automation MPM-B1152T-MJ74AA have?

Answer: The MPM-B1152T-MJ74AA has a Enclosure/Shaft Key/Shaft Seal of IP65/IP67 housing/shaft key/no shaft seal.


Question: What Factory Designated Options are included with the MPM-B1152T-MJ74AA?

Answer: The Allen Bradley Automation MPM-B1152T-MJ74AA includes Standard factory configuration for its Factory Designated Options.


Question: What Feedback is included with the Rockwell Automation MPM-B1152T-MJ74AA?

Answer: The Rockwell Automation MPM-B1152T-MJ74AA has a Multi-turn high-resolution encoder Feedback.


Question: What is the Frame Size-Bolt Circle Diameter of the Allen Bradley MPM-B1152T-MJ74AA?

Answer: The MPM-B1152T-MJ74AA has a Frame Size-Bolt Circle Diameter of 115 mm.


Question: What is the Magnet Stacks of the MPM-B1152T-MJ74AA?

Answer: The Magnet Stacks of the MPM-B1152T-MJ74AA is 2 stacks.


Question: What Mounting Flange does the Allen Bradley/Rockwell Automation MPM-B1152T-MJ74AA have?

Answer: The MPM-B1152T-MJ74AA has a IEC metric Mounting Flange.


Question: What is the Voltage Class of the Allen Bradley-Rockwell Automation MPM-B1152T-MJ74AA?

Answer: The Voltage Class of the MPM-B1152T-MJ74AA is 400V.


Series information for MPM-B1152T-MJ74AA

For additional information about MPM-B1152T-MJ74AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPM-B1152T-MJ74AA.

Revision Part # Also Known As Availability
MPM-B1152T-MJ74AA/A MPM-B1152T-MJ74AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPM-B11S2T-MJ74AA
  • MPM-B1I52T-MJ74AA
  • MPM-B1IS2T-MJ74AA
  • MPM-BI152T-MJ74AA
  • MPM-BI1S2T-MJ74AA
  • MPM-BII52T-MJ74AA
  • MPM-BIIS2T-MJ74AA
  • MPM-81152T-MJ74AA
  • MPM-811S2T-MJ74AA
  • MPM-81I52T-MJ74AA
  • MPM-81IS2T-MJ74AA
  • MPM-8I152T-MJ74AA
  • MPM-8I1S2T-MJ74AA
  • MPM-8II52T-MJ74AA
  • MPM-8IIS2T-MJ74AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP