GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | TLY-A110P-BJ62AA |
Series: | TLY and TL Servo Motors |
Description:
The TLY-A110P-BJ62AA is a TL series low inertia servo motor that was manufactured by Allen-Bradley. This device leads with a circular connector and it has a voltage rating of 230 volts AC. This product has a speed rating of 5000 rpm and it has an absolute encoder that is battery-backed and multi-turn for feedback. It has an IP65 housing for its enclosure. There is no brake equipped onto this device and it only has the standard factory options.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number TLY-A110P-BJ62AA is a servo motor belonging to the TL series of Allen-Bradley products. Classified as a servo motor with low inertia, this product leads with a circular connector. Two hundred and thirty (230) volts AC (alternating current) is the rated voltage of this unit. The flange size of this particular low inertia servo motor is one (1), meaning that the diameter of the mounting bolt circle measures forty-six (46) millimeters and has a NEMA size of NEMA 17. The magnet stack length of this Allen-Bradley product is ten (10). Five thousand (5000) is the speed rating for this servo motor. For feedback, this device is equipped with an absolute encoder that is battery-backed and multi-turn. The enclosure of this product is an IP65 housing. Also, this unit does have a shaft key, however, there is no shaft seal. The shaft and the shaft key are both made of carbon steel. The housing for the servo motor is made from aluminum and a potting compound. This servo motor has one (1) millimeter (39.4 inch) leads that have circular plastic connectors. Furthermore, there is no brake equipped to this unit and it only comes with the standard factory options.
It is important to be made aware of some environmental factors that could potentially affect the Allen-Bradley TLY-A110P-BJ62AA. A temperature range of thirty-two (32) to one hundred and four (104) degrees Fahrenheit (0 to 40 °C) should be kept when operating this product. A fourteen (14) to one hundred and eighty-five (185) degree Fahrenheit (-10 to 85 °C) temperature range should be maintained when storing this device. Additionally, a 20% to 85%, non-condensing relative humidity should also be maintained when storing this device. The atmosphere of the storage area must be non-corrosive.
Manufacturer | Allen Bradley |
Series | TL-Series Motors |
Product Type | Brushless AC Synchronous Servo Motors |
Kinetix Compatibility | offers Kinetix Integrated Motion when used with the Kinetix2000, Kinetix6000, or ULTRA3000 drives |
Frame Sizes | Metric and NEMA frame sizes |
Magnets | High-energy Neodymium-Iron-Boron (NeFeB) magnets |
Cable Extensions | 1 m (3.2ft) |
Certifications | TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information |
Continuous stall torque | 0.086...5.42 N*m (0.76...48 lb*in) |
Peak stall torque | 0.22...13 N*m (1.94...115 lb*in) |
Motor rated output | 0.037...2.0 kW |
Compatible servo drives | Kinetix 3, Kinetix 300/350, Kinetix 2000, Kinetix 6000, Ultra3000 |
Voltage Class | 200V-class windings |
Frame Size | 46 mm (1.81 in.) or NEMA 17 |
Motor stack length | One stack |
Rated Speed | 5000 rpm |
Feedback | Multi-turn (Single turn if used without battery backup), 17-bit (131,072) counts/revolution, absolute, battery-backed encoder (serial protocol) |
Enclosure | IP65 housing |
Shaft key | Has Shaft key |
Shaft Seal | No Shaft seal |
Connectors | Cables with circular connectors, 1 m (39.4 in.) |
Brake | No Brake |
Factory Options | Standard Metric |
MPN | TLY-A110P-BJ62AA |
Question: Does Automation Stop offer repairs on the TLY-A110P-BJ62AA?
Answer: Yes. We offer repairs for the TLY-A110P-BJ62AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and TLY-A110P-BJ62AA?
Answer: If you buy the TLY-A110P-BJ62AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the TLY-A110P-BJ62AA online?
Answer: Yes. Automation Stop sells the TLY-A110P-BJ62AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the TLY-A110P-BJ62AA?
Answer: The TLY-A110P-BJ62AA is made by Allen Bradley - Motors.
Question: What type of product is the TLY-A110P-BJ62AA?
Answer: The TLY-A110P-BJ62AA is part of the TLY and TL Servo Motors series.
Question: Does the TLY-A110P-BJ62AA have a Brake?
Answer: No Brake.
Question: What is the Cable Extensions of the TLY-A110P-BJ62AA?
Answer: The Cable Extensions of the Allen Bradley-Rockwell Automation TLY-A110P-BJ62AA is 1 m (3.2ft).
Question: What Certifications are included with the Allen Bradley-Rockwell Automation TLY-A110P-BJ62AA?
Answer: The TLY-A110P-BJ62AA includes TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information for its Certifications.
Question: What Compatible servo drives does the TLY-A110P-BJ62AA have?
Answer: The Rockwell-Automation TLY-A110P-BJ62AA has a Compatible servo drives of Kinetix 3, Kinetix 300/350, Kinetix 2000, Kinetix 6000, Ultra3000.
Question: What is the Connectors of the TLY-A110P-BJ62AA?
Answer: The Connectors of the TLY-A110P-BJ62AA is Cables with circular connectors, 1 m (39.4 in.).
Question: What Continuous stall torque does the Rockwell Automation TLY-A110P-BJ62AA have?
Answer: The Rockwell Automation TLY-A110P-BJ62AA has a Continuous stall torque of 0.086...5.42 N*m (0.76...48 lb*in).
Question: What is the Enclosure of the Rockwell-Automation TLY-A110P-BJ62AA?
Answer: The Enclosure of the TLY-A110P-BJ62AA is IP65 housing.
Question: What Factory Options are included with the TLY-A110P-BJ62AA?
Answer: The TLY-A110P-BJ62AA includes Standard Metric for its Factory Options.
Question: What is the Feedback of the Allen Bradley TLY-A110P-BJ62AA?
Answer: The Allen Bradley TLY-A110P-BJ62AA has a Feedback of Multi-turn (Single turn if used without battery backup), 17-bit (131,072) counts/revolution, absolute, battery-backed encoder (serial protocol).
Question: What is the Frame Size of the TLY-A110P-BJ62AA?
Answer: The Rockwell-Automation TLY-A110P-BJ62AA has a Frame Size of 46 mm (1.81 in.) or NEMA 17.
Question: What Frame Sizes are included with the TLY-A110P-BJ62AA?
Answer: The TLY-A110P-BJ62AA has Frame Sizes Metric and NEMA frame sizes.
Question: What Kinetix Compatibility does the TLY-A110P-BJ62AA have?
Answer: The Kinetix Compatibility of the Allen Bradley TLY-A110P-BJ62AA is offers Kinetix Integrated Motion when used with the Kinetix2000, Kinetix6000, or ULTRA3000 drives.
Question: What Magnets are included with the Rockwell Automation TLY-A110P-BJ62AA?
Answer: The TLY-A110P-BJ62AA includes High-energy Neodymium-Iron-Boron (NeFeB) magnets for its Magnets.
Question: What is the Motor rated output of the TLY-A110P-BJ62AA?
Answer: The TLY-A110P-BJ62AA has a Motor rated output of 0.037...2.0 kW.
Question: What Motor stack length is included with the TLY-A110P-BJ62AA?
Answer: The Rockwell Automation TLY-A110P-BJ62AA has a One stack Motor stack length.
Question: What is the Peak stall torque of the TLY-A110P-BJ62AA?
Answer: The Rockwell Automation TLY-A110P-BJ62AA has a Peak stall torque of 0.22...13 N*m (1.94...115 lb*in).
Question: What Product Type does the Rockwell Automation TLY-A110P-BJ62AA have?
Answer: The TLY-A110P-BJ62AA has a Brushless alternating current (AC) Synchronous Servo Motors Product Type.
Question: What is the Rated Speed of the TLY-A110P-BJ62AA?
Answer: The Allen Bradley Automation TLY-A110P-BJ62AA has a Rated Speed of 5000 revolutions per minute (RPM).
Question: What Shaft key does the TLY-A110P-BJ62AA have?
Answer: The TLY-A110P-BJ62AA has a Has Shaft key Shaft key.
Question: Does the Rockwell-Automation TLY-A110P-BJ62AA have a Shaft Seal?
Answer: No Shaft seal.
Question: What is the Voltage Class of the TLY-A110P-BJ62AA?
Answer: The Allen Bradley Automation TLY-A110P-BJ62AA has a Voltage Class of 200V-class windings.
For additional information about TLY-A110P-BJ62AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding TLY-A110P-BJ62AA.
Revision Part # | Also Known As | Availability |
---|---|---|
TLY-A110P-BJ62AA/A | TLY-A110P-BJ62AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.