GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

TLY-A130T-HJ64AA

Manufacturer: Allen Bradley - Motors
Product Type: Servo Motor
Part Number: TLY-A130T-HJ64AA
Series: TLY and TL Servo Motors

Description:

Product number TLY-A130T-HJ64AA is a brushless servo motor that was designed and manufactured by Allen-Bradley. It has a maximum speed of 6000 rpm and has a 0.14-kilowatt power rating. This model does not include a shaft seal. It comes with an incremental encoder for feedback. A 24-volt brake and a shaft key are installed as standard. This motor has a NEMA type 17 frame size and comes in an IP65 enclosure.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The TLY-A130T-HJ64AA is a high-performance servo motor. It is offered by Allen-Bradley as part of the TL series of low inertia motors. It features circular plastic connectors and supports Kinetix Integrated Motion when used with compatible drives. The motor packs high torque density in a compact package and is built with integrated Smart Motor Technology. This is a 200-volt class motor and uses magnets made out of Neodymium-Iron-Boron (NeFeB) for superior performance. It features 17-bit communication with a serial port. This model has a maximum speed of six thousand (6000) revolutions per minute (rpm) and is rated for operation at five thousand (5000) rpm. The motor has an output power rating of 0.14 kilowatts. It is contained in an enclosure that is built to meet IP65 standards and includes a built-in shaft key. This model does not come with a shaft seal pre-installed, although it supports user installation of a shaft seal using a kit. The motor provides feedback data through an integrated incremental encoder. The industry standard encoder operates at up to 2000 lines per revolution. The motor has circular connectors that come with cables with a length of 1 meter (39.4 inches). This unit has a frame size that measures 46 millimeters (1.81 inches), which is equivalent to a NEMA 17 frame. A 24 volts DC brake is also pre-installed in this motor. The approximate weight of this motor is 0.50 kilograms, or 1.1 pounds, and the brake motor weighs approximately 0.68 kilograms (1.5 pounds). The brake is rated for a holding torque of 0.32 Newton-meters (2.8 lb-in).

Technical Specifications

Manufacturer Allen Bradley
Series TL-Series Motors
Product Type Brushless AC Synchronous Servo Motors
Kinetix Compatibility offers Kinetix Integrated Motion when used with the Kinetix2000, Kinetix6000, or ULTRA3000 drives
Frame Sizes Metric and NEMA frame sizes
Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets
Cable Extensions 1 m (3.2ft)
Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information
Continuous stall torque 0.086...5.42 N*m (0.76...48 lb*in)
Peak stall torque 0.22...13 N*m (1.94...115 lb*in)
Motor rated output 0.037...2.0 kW
Compatible servo drives Kinetix 3, Kinetix 300/350, Kinetix 2000, Kinetix 6000, Ultra3000
Voltage Class 200V-class windings
Frame Size 46 mm (1.81 in.) or NEMA 17
Motor stack length Three stack
Rated Speed 6000 rpm
Feedback 2000 lines/revolution, incremental encoder
Enclosure IP65 housing
Shaft key Has Shaft key
Shaft Seal No Shaft seal
Connectors Cables with circular connectors, 1 m (39.4 in.)
Brake 24V DC Brake
Factory Options Standard Metric
MPN TLY-A130T-HJ64AA
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the TLY-A130T-HJ64AA?

Answer: Yes. We offer repairs for the TLY-A130T-HJ64AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and TLY-A130T-HJ64AA?

Answer: If you buy the TLY-A130T-HJ64AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the TLY-A130T-HJ64AA online?

Answer: Yes. Automation Stop sells the TLY-A130T-HJ64AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the TLY-A130T-HJ64AA?

Answer: The TLY-A130T-HJ64AA is made by Allen Bradley - Motors.


Question: What type of product is the TLY-A130T-HJ64AA?

Answer: The TLY-A130T-HJ64AA is part of the TLY and TL Servo Motors series.


Question: What Brake does the Allen-Bradley TLY-A130T-HJ64AA have?

Answer: The Allen-Bradley TLY-A130T-HJ64AA has a Brake of 24 volts DC Brake.


Question: What is the Cable Extensions of the TLY-A130T-HJ64AA?

Answer: The TLY-A130T-HJ64AA has a Cable Extensions of 1 m (3.2ft).


Question: What kind of Certifications does the Rockwell-Automation TLY-A130T-HJ64AA have?

Answer: The Rockwell-Automation TLY-A130T-HJ64AA has Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information.


Question: What Compatible servo drives does the TLY-A130T-HJ64AA have?

Answer: The Compatible servo drives of the Allen Bradley-Rockwell Automation TLY-A130T-HJ64AA is Kinetix 3, Kinetix 300/350, Kinetix 2000, Kinetix 6000, Ultra3000.


Question: What is the Connectors of the TLY-A130T-HJ64AA?

Answer: The Allen Bradley Automation TLY-A130T-HJ64AA has a Connectors of Cables with circular connectors, 1 m (39.4 in.).


Question: What is the Continuous stall torque of the TLY-A130T-HJ64AA?

Answer: The Continuous stall torque of the Allen-Bradley TLY-A130T-HJ64AA is 0.086...5.42 N*m (0.76...48 lb*in).


Question: What is the Enclosure of the Allen Bradley TLY-A130T-HJ64AA?

Answer: The Allen Bradley TLY-A130T-HJ64AA has a Enclosure of IP65 housing.


Question: What kind of Factory Options does the TLY-A130T-HJ64AA have?

Answer: The Allen Bradley TLY-A130T-HJ64AA has Factory Options Standard Metric.


Question: What Feedback does the TLY-A130T-HJ64AA have?

Answer: The Feedback of the TLY-A130T-HJ64AA is 2000 lines/revolution, incremental encoder.


Question: What is the Frame Size of the TLY-A130T-HJ64AA?

Answer: The TLY-A130T-HJ64AA has a Frame Size of 46 mm (1.81 in.) or NEMA 17.


Question: What kind of Frame Sizes does the TLY-A130T-HJ64AA have?

Answer: The TLY-A130T-HJ64AA has Frame Sizes Metric and NEMA frame sizes.


Question: What is the Kinetix Compatibility of the Allen Bradley TLY-A130T-HJ64AA?

Answer: The Kinetix Compatibility of the TLY-A130T-HJ64AA is offers Kinetix Integrated Motion when used with the Kinetix2000, Kinetix6000, or ULTRA3000 drives.


Question: What Magnets are included with the Allen Bradley/Rockwell Automation TLY-A130T-HJ64AA?

Answer: The TLY-A130T-HJ64AA has Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets.


Question: What Motor rated output does the TLY-A130T-HJ64AA have?

Answer: The Rockwell-Automation TLY-A130T-HJ64AA has a Motor rated output of 0.037...2.0 kW.


Question: What Motor stack length is included with the TLY-A130T-HJ64AA?

Answer: The Allen Bradley/Rockwell Automation TLY-A130T-HJ64AA has a Three stack Motor stack length.


Question: What Peak stall torque does the Allen Bradley/Rockwell Automation TLY-A130T-HJ64AA have?

Answer: The TLY-A130T-HJ64AA has a Peak stall torque of 0.22...13 N*m (1.94...115 lb*in).


Question: What Product Type does the TLY-A130T-HJ64AA have?

Answer: The TLY-A130T-HJ64AA has a Brushless AC (alternating current) Synchronous Servo Motors Product Type.


Question: What is the Rated Speed of the TLY-A130T-HJ64AA?

Answer: The TLY-A130T-HJ64AA has a Rated Speed of 6000 revolutions per minute (RPM).


Question: What Shaft key is included with the TLY-A130T-HJ64AA?

Answer: The TLY-A130T-HJ64AA has a Has Shaft key Shaft key.


Question: Does the TLY-A130T-HJ64AA have a Shaft Seal?

Answer: No Shaft seal.


Question: What Voltage Class does the Allen Bradley-Rockwell Automation TLY-A130T-HJ64AA have?

Answer: The Voltage Class of the TLY-A130T-HJ64AA is 200V-class windings.


Series information for TLY-A130T-HJ64AA

For additional information about TLY-A130T-HJ64AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding TLY-A130T-HJ64AA.

Revision Part # Also Known As Availability
TLY-A130T-HJ64AA/A TLY-A130T-HJ64AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • TLY-A130T-HJG4AA
  • TLY-A13OT-HJ64AA
  • TLY-A13OT-HJG4AA
  • TLY-AI30T-HJ64AA
  • TLY-AI30T-HJG4AA
  • TLY-AI3OT-HJ64AA
  • TLY-AI3OT-HJG4AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP